更新 README.md

.gitignore

@@ -56,5 +56,6 @@ dkms.conf
 /Project/DebugConfig
 /Project/Listings
 /Project/Objects
-*.uvguix.lenovo
+*.uvguix.*
-*.uvoptx
+*.uvoptx
+*.scvd

Core/startup_stm32h743xx.s

@@ -31,8 +31,8 @@
 ; </h>
 
 ;Stack_Size      EQU     0x00000400
-;栈大小设置为 262144 Bytes
+;栈大小设置为 131072 Bytes
-Stack_Size      EQU     0x00040000
+Stack_Size      EQU     0x00020000
 
                 AREA    STACK, NOINIT, READWRITE, ALIGN=3
 Stack_Mem       SPACE   Stack_Size
@@ -44,8 +44,8 @@ __initial_sp
 ; </h>
 
 ;Heap_Size       EQU     0x00000200
-;堆大小设置为 262144 Bytes
+;堆大小设置为 393216 Bytes
-Heap_Size       EQU     0x00040000
+Heap_Size       EQU     0x00060000
 
                 AREA    HEAP, NOINIT, READWRITE, ALIGN=3
 __heap_base

Core/stm32h7xx_it.c

@@ -151,11 +151,11 @@ void PendSV_Handler(void)
   * @param  None
   * @retval None
   */
-void SysTick_Handler(void)
+// void SysTick_Handler(void)
-{
+// {
-  HAL_IncTick();
+//   HAL_IncTick();
 	
-}
+// }
   
 
 /******************************************************************************/

Hardware/hc12/hc12.c

@@ -0,0 +1,20 @@
+//HC12 库
+
+#include "string.h"
+
+#include "systick.h"
+
+#include "hc25.h"
+
+/**************************************** 私有变量 ****************************************/
+
+/*****************************************************************************************/
+
+/**************************************** 私有函数 ****************************************/
+
+/*****************************************************************************************/
+
+void HC12_Init(void)
+{
+    
+}

Hardware/hc12/hc12.h

@@ -0,0 +1,19 @@
+//HC12 ¿â
+
+#ifndef __HC12_H
+#define __HC12_H
+
+#include "uart.h"
+
+#define HC12_COM COM3
+
+#define HC12_SendBuff(__pdata__, __data_len__) Uart_SendBuf(HC12_COM, __pdata__, __data_len__)
+#define HC12_Receive(__pdata__) Uart_GetChar(HC12_COM, __pdata__)
+#define HC12_ReceiveBuffUntil(__pdata__, __end_byte__, __timeout__) Uart_GetBuffUntil(HC12_COM, __pdata__, __end_byte__, __timeout__)
+#define HC12_ClearSend Uart_ClearTxFifo(HC12_COM)
+#define HC12_ClearReceive Uart_ClearRxFifo(HC12_COM)
+#define HC12_BindReceiveHandle(__receive__) Uart_BindReceiveHandle(HC12_COM, __receive__)
+
+void HC12_Init(void);
+
+#endif

Hardware/hc25/hc25.c

@@ -0,0 +1,32 @@
+//HC25 库
+
+#include "string.h"
+
+#include "systick.h"
+
+#include "led.h"
+
+#include "hc25.h"
+
+/**************************************** 私有变量 ****************************************/
+
+uint8_t is_at_mode = 1; //开机时默认 AT 模式打开，防止出错
+uint8_t at_cmd[30];
+
+/*****************************************************************************************/
+
+/**************************************** 私有函数 ****************************************/
+
+/*****************************************************************************************/
+
+void HC25_Init(void)
+{
+    HC25_ExitATMode;
+}
+
+void HC25_SendATCmd(uint8_t *cmd)
+{
+    strcpy(at_cmd, "AT+");
+    strcat(at_cmd, cmd);
+    HC25_SendBuff(at_cmd, strlen(at_cmd) + 1);
+}

Hardware/hc25/hc25.h

@@ -0,0 +1,39 @@
+//HC25 ¿â
+
+#ifndef __HC25_H
+#define __HC25_H
+
+#include "sys.h"
+#include "uart.h"
+
+#define HC25_COM COM2
+
+#define HC25_SendBuff(__pdata__, __data_len__)       \
+    Uart_SendBuf(HC25_COM, __pdata__, __data_len__); \
+    Delay_ms(50)
+#define HC25_Receive(__pdata__) Uart_GetChar(HC25_COM, __pdata__)
+#define HC25_ReceiveBuffUntil(__pdata__, __end_byte__, __timeout__) Uart_GetBuffUntil(HC25_COM, __pdata__, __end_byte__, __timeout__)
+#define HC25_ClearSend Uart_ClearTxFifo(HC25_COM)
+#define HC25_ClearReceive Uart_ClearRxFifo(HC25_COM)
+#define HC25_EnterATMode         \
+    if (is_at_mode == 0)         \
+    {                            \
+        HC25_SendBuff("+++", 4); \
+        Delay_ms(200);            \
+        is_at_mode = 1;          \
+        HC25_ClearReceive;       \
+    }
+#define HC25_ExitATMode         \
+    if (is_at_mode == 1)        \
+    {                           \
+        HC25_SendATCmd("ENTM"); \
+        Delay_ms(200);           \
+        is_at_mode = 0;         \
+        HC25_ClearReceive;      \
+    }
+
+void HC25_Init(void);
+
+void HC25_SendATCmd(uint8_t *cmd);
+
+#endif

Hardware/key/key.c

@@ -1,68 +1,348 @@
-//按键操作
+//按键 FIFO 库
 
-#include "delay.h"
+#include "adc.h"
-#include "gpio.h"
 
 #include "key.h"
 
-/**
+#define DIGITAL_KEY_NUM 3 //数字信号按键个数
-  * @brief  KEY1 KEY2 初始化函数
+#define ADC_KEY_NUM 4     //模拟信号按键个数
-  */
+#define KEY_COUNT (DIGITAL_KEY_NUM + ADC_KEY_NUM)
-void KEY_Init(void)
+
+//使能 GPIO 时钟
+#define ALL_KEY_GPIO_CLK_ENABLE()     \
+    {                                 \
+        __HAL_RCC_GPIOE_CLK_ENABLE(); \
+        __HAL_RCC_GPIOC_CLK_ENABLE(); \
+        __HAL_RCC_GPIOD_CLK_ENABLE(); \
+    };
+
+typedef struct
 {
-    GPIO_E3_C5_Init();
+    GPIO_TypeDef *gpio;
+    uint16_t pin;
+} X_GPIO_T;
+
+static const X_GPIO_T s_gpio_list[DIGITAL_KEY_NUM] = {
+    {GPIOE, GPIO_PIN_3}, //KEY1
+    {GPIOC, GPIO_PIN_5}, //KEY2
+    {GPIOD, GPIO_PIN_10} //JOY_OK
+};
+
+static volatile KEY_T s_tBtn[KEY_COUNT] = {0};
+static volatile KEY_FIFO_T s_tKey; //按键 FIFO 变量
+static volatile is_key_clear = 1;
+
+static void InitKeyVar(void);
+static void InitKeyDigital(void);
+static void DetectKey(uint8_t i);
+
+static uint8_t KeyPinActive(uint8_t _id)
+{
+    if (_id < DIGITAL_KEY_NUM)
+    {
+        uint8_t level;
+
+        if ((s_gpio_list[_id].gpio->IDR & s_gpio_list[_id].pin) == 0)
+            return 1;
+        else
+            return 0;
+    }
+    else if (_id < DIGITAL_KEY_NUM + ADC_KEY_NUM)
+    {
+        switch (_id)
+        {
+        case JOY_U:
+        {
+            if (ADC_Get_PC0() < 0.01)
+                return 1;
+            else
+                return 0;
+        }
+        break;
+
+        case JOY_D:
+        {
+            if (ADC_Get_PC0() > 3.20)
+                return 1;
+            else
+                return 0;
+        }
+        break;
+
+        case JOY_L:
+        {
+            if (ADC_Get_PC1() < 0.01)
+                return 1;
+            else
+                return 0;
+        }
+        break;
+
+        case JOY_R:
+        {
+            if (ADC_Get_PC1() > 3.20)
+                return 1;
+            else
+                return 0;
+        }
+        }
+    }
+}
+
+static uint8_t IsKeyDownFunc(uint8_t _id)
+{
+    uint8_t count = 0;
+    uint8_t save = UINT8_MAX;
+
+    //判断有几个键按下
+    for (uint8_t i = 0; i < KEY_COUNT; i++)
+    {
+        if (KeyPinActive(i))
+        {
+            count++;
+            save = i;
+        }
+    }
+
+    if (count == 1 && save == _id)
+        return 1; //只有单个键按下时才有效
+
+    return 0;
 }
 
 /**
-  * @brief  获取当前按下的键。等待按键释放后结束
+  * @brief  初始化按键
-  * @retval NO_KEY KEY1 KEY2
+  */
+void KEY_Init(void)
+{
+    InitKeyVar();     //初始化按键变量
+    InitKeyDigital(); //初始化数字按键
+}
+
+static void InitKeyDigital(void)
+{
+    GPIO_InitTypeDef gpio_init;
+
+    ALL_KEY_GPIO_CLK_ENABLE();
+
+    gpio_init.Mode = GPIO_MODE_INPUT;
+    gpio_init.Pull = GPIO_PULLUP;
+    gpio_init.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+
+    for (uint8_t i = 0; i < DIGITAL_KEY_NUM; i++)
+    {
+        gpio_init.Pin = s_gpio_list[i].pin;
+        HAL_GPIO_Init(s_gpio_list[i].gpio, &gpio_init);
+    }
+}
+
+static void InitKeyVar(void)
+{
+    s_tKey.Read = 0;
+    s_tKey.Write = 0;
+
+    //缺省值
+    for (uint8_t i = 0; i < KEY_COUNT; i++)
+    {
+        s_tBtn[i].LongTime = KEY_LONG_TIME;    //若设置为 0 表示不检测长按键事件
+        s_tBtn[i].Count = KEY_FILTER_TIME / 2; //计数器设置为滤波时间的一半
+        s_tBtn[i].State = 0;                   //按键缺省状态，0 为未按下
+        s_tBtn[i].RepeatSpeed = 0;             //按键连发的速度，0 表示不支持连发
+        s_tBtn[i].RepeatCount = 0;             //连发计数器
+    }
+
+    //摇杆上下左右，支持长按 1 秒后，自动连发
+    KEY_SetKeyParam(JOY_U, 50, 6);
+    KEY_SetKeyParam(JOY_D, 50, 6);
+    KEY_SetKeyParam(JOY_L, 50, 6);
+    KEY_SetKeyParam(JOY_R, 50, 6);
+}
+
+/**
+  * @brief  将键值压入按键 FIFO。可用于模拟一个按键事件
+  * @param  _KeyCode: 键值
+  */
+void KEY_PutKey(uint8_t _KeyCode)
+{
+    s_tKey.Buf[s_tKey.Write] = _KeyCode;
+
+    if (++s_tKey.Write >= KEY_FIFO_SIZE)
+    {
+        s_tKey.Write = 0;
+    }
+}
+
+/**
+  * @brief  从按键 FIFO 读取一个键值
+  * @retval 键值
   */
 uint8_t KEY_GetKey(void)
 {
-    if (KEY1_Val == 0)
+    if (s_tKey.Read == s_tKey.Write)
     {
-        Delay_ms(10);
+        return KEY_NONE;
-
-        if (KEY1_Val == 0)
-        {
-            while (KEY1_Val == 0)
-                ;
-
-            return KEY1;
-        }
     }
-    else if (KEY2_Val == 0)
+    else
     {
-        Delay_ms(10);
+        uint8_t ret = s_tKey.Buf[s_tKey.Read];
 
-        if (KEY2_Val == 0)
+        if (++s_tKey.Read >= KEY_FIFO_SIZE)
+            s_tKey.Read = 0;
+
+        if (
+            ret == KEY1_UP ||
+            ret == KEY2_UP ||
+            ret == JOY_OK_UP ||
+            ret == JOY_U_UP ||
+            ret == JOY_D_UP ||
+            ret == JOY_L_UP ||
+            ret == JOY_R_UP)
         {
-            while (KEY2_Val == 0)
+            if (is_key_clear)
-                ;
+            {
+                is_key_clear = 0;
+                return KEY_NONE;
+            }
+        }
 
-            return KEY2;
+        is_key_clear = 0;
+        return ret;
+    }
+}
+
+/**
+  * @brief  从按键 FIFO 读取一个键值，空值时阻塞
+  * @retval 键值
+  */
+uint8_t KEY_GetKeyWait(void)
+{
+    uint8_t key = KEY_NONE;
+
+    while (key == KEY_NONE)
+        key = KEY_GetKey();
+
+    return key;
+}
+
+/**
+  * @brief  读取某键状态
+  * @param  _ucKeyID: 按键 ID
+  * @retval 1 表示按下，0 表示未按下
+  */
+uint8_t KEY_GetKeyState(KEY_ID_E _ucKeyID)
+{
+    return s_tBtn[_ucKeyID].State;
+}
+
+/**
+  * @brief  等待特定键按下
+  * @param  _ucKeyID: 按键 ID
+  */
+void KEY_WaitKey(KEY_ID_E _ucKeyID)
+{
+    while (KEY_GetKeyState(_ucKeyID) != 1)
+        ;
+}
+
+/**
+  * @brief  设置按键参数
+  * @param  _ucKeyID: 按键 ID
+  * @param  _LongTime: 长按事件时间
+  * @param  _RepeatSpeed: 连发速度
+  */
+void KEY_SetKeyParam(uint8_t _ucKeyID, uint16_t _LongTime, uint8_t _RepeatSpeed)
+{
+    s_tBtn[_ucKeyID].LongTime = _LongTime;       //长按时间 0 表示不检测长按键事件
+    s_tBtn[_ucKeyID].RepeatSpeed = _RepeatSpeed; //按键连发的速度，0 表示不支持连发
+    s_tBtn[_ucKeyID].RepeatCount = 0;
+}
+
+/**
+  * @brief  清空按键 FIFO
+  */
+void KEY_ClearKey(void)
+{
+    s_tKey.Read = s_tKey.Write;
+    is_key_clear = 1;
+}
+
+static void DetectKey(uint8_t i)
+{
+    KEY_T *pBtn;
+
+    pBtn = &s_tBtn[i];
+    if (IsKeyDownFunc(i))
+    {
+        if (pBtn->Count < KEY_FILTER_TIME)
+        {
+            pBtn->Count = KEY_FILTER_TIME;
+        }
+        else if (pBtn->Count < 2 * KEY_FILTER_TIME)
+        {
+            pBtn->Count++;
+        }
+        else
+        {
+            if (pBtn->State == 0)
+            {
+                pBtn->State = 1;
+
+                KEY_PutKey((uint8_t)(3 * i + 1));
+            }
+
+            if (pBtn->LongTime > 0)
+            {
+                if (pBtn->LongCount < pBtn->LongTime)
+                {
+                    if (++pBtn->LongCount == pBtn->LongTime)
+                    {
+                        KEY_PutKey((uint8_t)(3 * i + 3));
+                    }
+                }
+                else
+                {
+                    if (pBtn->RepeatSpeed > 0)
+                    {
+                        if (++pBtn->RepeatCount >= pBtn->RepeatSpeed)
+                        {
+                            pBtn->RepeatCount = 0;
+                            KEY_PutKey((uint8_t)(3 * i + 1));
+                        }
+                    }
+                }
+            }
         }
     }
     else
     {
-        return NO_KEY;
+        if (pBtn->Count > KEY_FILTER_TIME)
-    }
+        {
+            pBtn->Count = KEY_FILTER_TIME;
+        }
+        else if (pBtn->Count != 0)
+        {
+            pBtn->Count--;
+        }
+        else
+        {
+            if (pBtn->State == 1)
+            {
+                pBtn->State = 0;
 
-    return NO_KEY;
+                KEY_PutKey((uint8_t)(3 * i + 2));
+            }
+        }
+
+        pBtn->LongCount = 0;
+        pBtn->RepeatCount = 0;
+    }
 }
 
 /**
-  * @brief  等待键按下并获取键值。等待按键释放后结束
+  * @brief  扫描所有按键。非阻塞，应被 SysTick 中断周期性的调用，10ms 一次
-  * @retval KEY1 KEY2
   */
-uint8_t KEY_GetKeyWait(void)
+void KEY_Scan10ms(void)
 {
-    uint8_t key = NO_KEY;
+    for (uint8_t i = 0; i < KEY_COUNT; i++)
-
+        DetectKey(i);
-    while (key == NO_KEY)
-    {
-        key = KEY_GetKey();
-    }
-
-    return key;
 }

Hardware/key/key.h

@@ -1,21 +1,117 @@
-//°´¼ü²Ù×÷
+//按键 FIFO 库
 
 #ifndef __KEY_H
 #define __KEY_H
 
 #include "sys.h"
 
-#define NO_KEY 0
+//按键事件别名
-#define KEY1 1
-#define KEY2 2
-#define KEY3 3
-#define KEY4 4
 
-#define KEY1_Val HAL_GPIO_ReadPin(GPIOE, GPIO_PIN_3)
+#define KEY1_DOWN KEY_1_DOWN
-#define KEY2_Val HAL_GPIO_ReadPin(GPIOC, GPIO_PIN_5)
+#define KEY1_UP KEY_1_UP
+#define KEY1_LONG KEY_1_LONG
+
+#define KEY2_DOWN KEY_2_DOWN
+#define KEY2_UP KEY_2_UP
+#define KEY2_LONG KEY_2_LONG
+
+#define JOY_OK_DOWN KEY_3_DOWN //OK
+#define JOY_OK_UP KEY_3_UP
+#define JOY_OK_LONG KEY_3_LONG
+
+#define JOY_U_DOWN KEY_4_DOWN //上
+#define JOY_U_UP KEY_4_UP
+#define JOY_U_LONG KEY_4_LONG
+
+#define JOY_D_DOWN KEY_5_DOWN //下
+#define JOY_D_UP KEY_5_UP
+#define JOY_D_LONG KEY_5_LONG
+
+#define JOY_L_DOWN KEY_6_DOWN //左
+#define JOY_L_UP KEY_6_UP
+#define JOY_L_LONG KEY_6_LONG
+
+#define JOY_R_DOWN KEY_7_DOWN //右
+#define JOY_R_UP KEY_7_UP
+#define JOY_R_LONG KEY_7_LONG
+
+//按键 ID
+typedef enum
+{
+    KEY1 = 0,
+    KEY2,
+    JOY_OK,
+    JOY_U,
+    JOY_D,
+    JOY_L,
+    JOY_R
+} KEY_ID_E;
+
+#define KEY_FILTER_TIME 5 //按键滤波时间 50ms，单位 10ms
+#define KEY_LONG_TIME 100 //持续 1 秒，长按事件
+
+typedef struct
+{
+    uint8_t (*IsKeyDownFunc)(void); //按键按下的判断函数，1 表示按下
+
+    uint8_t Count;       //滤波器计数器
+    uint16_t LongCount;  //长按计数器
+    uint16_t LongTime;   //按键按下持续时间，0 表示不检测长按
+    uint8_t State;       //按键当前状态（按下还是弹起）
+    uint8_t RepeatSpeed; //连续按键周期
+    uint8_t RepeatCount; //连续按键计数器
+} KEY_T;
+
+typedef enum
+{
+    KEY_NONE = 0,
+
+    KEY_1_DOWN, //1 键按下
+    KEY_1_UP,   //1 键弹起
+    KEY_1_LONG, //1 键长按
+
+    KEY_2_DOWN, //2 键按下
+    KEY_2_UP,   //2 键弹起
+    KEY_2_LONG, //2 键长按
+
+    KEY_3_DOWN, //3 键按下
+    KEY_3_UP,   //3 键弹起
+    KEY_3_LONG, //3 键长按
+
+    KEY_4_DOWN, //4 键按下
+    KEY_4_UP,   //4 键弹起
+    KEY_4_LONG, //4 键长按
+
+    KEY_5_DOWN, //5 键按下
+    KEY_5_UP,   //5 键弹起
+    KEY_5_LONG, //5 键长按
+
+    KEY_6_DOWN, //6 键按下
+    KEY_6_UP,   //6 键弹起
+    KEY_6_LONG, //6 键长按
+
+    KEY_7_DOWN, //7 键按下
+    KEY_7_UP,   //7 键弹起
+    KEY_7_LONG, //7 键长按
+} KEY_ENUM;
+
+//按键 FIFO 变量
+#define KEY_FIFO_SIZE 10
+typedef struct
+{
+    uint8_t Buf[KEY_FIFO_SIZE]; //键值缓冲区
+    uint8_t Read;               //缓冲区读指针
+    uint8_t Write;              //缓冲区写指针
+} KEY_FIFO_T;
 
 void KEY_Init(void);
+void KEY_Scan10ms(void);
+void KEY_PutKey(uint8_t _KeyCode);
 uint8_t KEY_GetKey(void);
 uint8_t KEY_GetKeyWait(void);
+uint8_t KEY_GetKeyState(KEY_ID_E _ucKeyID);
+void KEY_WaitKey(KEY_ID_E _ucKeyID);
+void KEY_SetKeyParam(uint8_t _ucKeyID, uint16_t _LongTime, uint8_t _RepeatSpeed);
+void KEY_ClearKey(void);
 
 #endif

Hardware/lcd/lcd.c

@@ -1,12 +1,12 @@
-#include "delay.h"
+//LCD 库（ILI9431 及字库）
+
+#include "systick.h"
 #include "spi.h"
 
 #include "lcd.h"
 
 /**************************************** 私有函数 ****************************************/
 
-void LCD_SetWin(uint16_t x, uint16_t y, uint16_t width, uint16_t height);
-
 /*****************************************************************************************/
 
 /**
@@ -116,7 +116,15 @@ void LCD_SendCmdDataBytes(uint8_t cmd, uint8_t *pData, uint32_t Count)
 void LCD_Init(void)
 {
     //初始化 ILI9431
-    GPIO_B0_B1_B12_Init(); //³õʼ»¯ PB0 PB1 PB12
+    //初始化 PB0 PB1 PB12
+    GPIO_InitTypeDef GPIO_Initure;
+    __HAL_RCC_GPIOB_CLK_ENABLE(); //开启 PB 时钟
+
+    GPIO_Initure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_12; //PB0 PB1 PB12
+    GPIO_Initure.Mode = GPIO_MODE_OUTPUT_PP;                  //推挽输出
+    GPIO_Initure.Pull = GPIO_PULLUP;                          //上拉
+    GPIO_Initure.Speed = GPIO_SPEED_FREQ_VERY_HIGH;           //高速
+    HAL_GPIO_Init(GPIOB, &GPIO_Initure);                      //初始化 PB0 PB1 PB12
 
     LCD_Stop_Send;
     LCD_Data_Mode_On;

Hardware/lcd/lcd.h

@@ -1,3 +1,5 @@
+//LCD ¿â£¨ILI9431 ¼°×ֿ⣩
+
 #ifndef __LCD_H
 #define __LCD_H
 
@@ -155,6 +157,7 @@
 #define LCD_Reverse_Off LCD_SendCmd(LCD_CMD_DINVOFF) //关全局反色模式
 
 #define LCD_RAM_Wr LCD_SendCmd(LCD_CMD_RAMWR) //开始写显存
+#define LCD_RAM_Rd LCD_SendCmd(LCD_CMD_RAMRD) //¿ªÊ¼¶ÁÏÔ´æ
 
 /**************************************** 通讯函数 ****************************************/
 
@@ -173,6 +176,7 @@ void LCD_SendCmdDataBytes(uint8_t cmd, uint8_t *pData, uint32_t Count);
 /**************************************** 操作函数 ****************************************/
 
 void LCD_Init(void);
+void LCD_SetWin(uint16_t x, uint16_t y, uint16_t width, uint16_t height);
 
 void LCD_Font_ReadAddr(uint8_t *pData, uint32_t addr, uint16_t Count);
 

Hardware/led/led.c

@@ -1,4 +1,6 @@
-#include "gpio.h"
+//LED 库
+
+#include "sys.h"
 
 #include "led.h"
 
@@ -7,6 +9,34 @@
   */
 void LED_Init(void)
 {
-    GPIO_A1_Init();
+    GPIO_InitTypeDef GPIO_Initure;
+    __HAL_RCC_GPIOA_CLK_ENABLE(); //开启 PA 时钟
+
+    GPIO_Initure.Pin = GPIO_PIN_1;                  //PA1
+    GPIO_Initure.Mode = GPIO_MODE_OUTPUT_PP;        //推挽输出
+    GPIO_Initure.Pull = GPIO_PULLUP;                //上拉
+    GPIO_Initure.Speed = GPIO_SPEED_FREQ_VERY_HIGH; //高速
+    HAL_GPIO_Init(GPIOA, &GPIO_Initure);            //初始化 PA1
+
     LED2_Off;
+    SysTick_StartTimer(LED2_SYSTICK_TIMER_ID, 50);
+}
+
+/**
+  * @brief  LED2 慢速翻转，无阻塞，防止因调用过快导致无法观察
+  * @param  led_num: 序号
+  */
+void LED_Slow_Toggle(uint8_t led_num)
+{
+    switch (led_num)
+    {
+    case 2:
+    {
+        if (SysTick_CheckTimer(LED2_SYSTICK_TIMER_ID))
+        {
+            HAL_GPIO_TogglePin(GPIOA, GPIO_PIN_1);
+            SysTick_StartTimer(LED2_SYSTICK_TIMER_ID, 50);
+        }
+    }
+    }
 }

Hardware/led/led.h

@@ -1,3 +1,5 @@
+//LED 库
+
 #ifndef _LED_H
 #define _LED_H
 
@@ -6,8 +8,11 @@
 #define LED2(n) (n ? HAL_GPIO_WritePin(GPIOA, GPIO_PIN_1, GPIO_PIN_SET) : HAL_GPIO_WritePin(GPIOA, GPIO_PIN_1, GPIO_PIN_RESET))
 #define LED2_On LED2(0)
 #define LED2_Off LED2(1)
-#define LED2_Toggle (HAL_GPIO_TogglePin(GPIOA, GPIO_PIN_1)) //LED2 ·­×ª
+#define LED2_Toggle HAL_GPIO_TogglePin(GPIOA, GPIO_PIN_1) //LED2 翻转
+#define LED2_SYSTICK_TIMER_ID 0
+#define LED2_Slow_Toggle LED_Slow_Toggle(2) //LED2 慢速翻转，无阻塞，防止因调用过快导致无法观察
 
 void LED_Init(void);
+void LED_Slow_Toggle(uint8_t led_num);
 
 #endif

Hardware/sdio/sdio.c

@@ -80,73 +80,18 @@
 #include "stm32h7xx_hal.h"
 #include "sdio.h"
 
-/** @addtogroup BSP
-  * @{
-  */
-
-/** @addtogroup STM32H743I_EVAL
-  * @{
-  */
-
-/** @addtogroup STM32H743I_EVAL_SD
-  * @{
-  */
-
-/** @defgroup STM32H743I_EVAL_SD_Private_TypesDefinitions SD Private TypesDefinitions
-  * @{
-  */
-/**
-  * @}
-  */
-
-/** @defgroup STM32H743I_EVAL_SD_Private_Defines SD Private Defines
-  * @{
-  */
-
-/* 卡插入引脚 : PG9 */
 //#define SD_DETECT_GPIO_CLK_ENABLE()	__HAL_RCC_GPIOB_CLK_ENABLE()
 
 //#define SD_DETECT_GPIO_PORT	GPIOG
 //#define SD_DETECT_PIN		GPIO_PIN_9
 
-/* PG9 == 0 表示卡插入 */
 //#define SD_IS_INSERTED()  ((SD_DETECT_GPIO_PORT->IDR & SD_DETECT_PIN) == 0)
 
 #define SD_IS_INSERTED() 1
 
-/**
-  * @}
-  */
-
-/** @defgroup STM32H743I_EVAL_SD_Private_Macros SD Private Macros
-  * @{
-  */
-/**
-  * @}
-  */
-
-/** @defgroup STM32H743I_EVAL_SD_Private_Variables SD Private Variables
-  * @{
-  */
-
 SD_HandleTypeDef uSdHandle;
 //static uint8_t UseExtiModeDetection = 0;
 
-/**
-  * @}
-  */
-
-/** @defgroup STM32H743I_EVAL_SD_Private_FunctionPrototypes SD Private FunctionPrototypes
-  * @{
-  */
-/**
-  * @}
-  */
-
-/** @addtogroup STM32H743I_EVAL_SD_Exported_Functions
-  * @{
-  */
-
 /**
   * @brief  Initializes the SD card device.
   * @retval SD status
@@ -563,14 +508,6 @@ void HAL_SD_DriveTransciver_1_8V_Callback(FlagStatus status)
     BSP_SD_DriveTransciver_1_8V_Callback(status);
 }
 
-/*
-*********************************************************************************************************
-*	函 数 名: SDIO_IRQHandler
-*	功能说明: SDIO中断
-*	形    参:  无
-*	返 回 值: 无
-*********************************************************************************************************
-*/
 void SDMMC1_IRQHandler(void)
 {
     HAL_SD_IRQHandler(&uSdHandle);

Libraries/FatFs/ffconf.h

@@ -251,7 +251,7 @@
 /  buffer in the file system object (FATFS) is used for the file data transfer. */
 
 
-#define _FS_EXFAT	0
+#define _FS_EXFAT	1
 /* This option switches support of exFAT file system. (0:Disable or 1:Enable)
 /  When enable exFAT, also LFN needs to be enabled. (_USE_LFN >= 1)
 /  Note that enabling exFAT discards C89 compatibility. */

Project/STM32Player.uvprojx

@@ -339,7 +339,7 @@
               <MiscControls></MiscControls>
               <Define>USE_HAL_DRIVER, STM32H743xx</Define>
               <Undefine></Undefine>
-              <IncludePath>..\Core;..\Hardware\led;..\Hardware\key;..\Hardware\lcd;..\Hardware\sdio;..\Libraries\HAL_Lib\Inc;..\Libraries\FatFs;..\Libraries\FatFs\drivers;..\System\delay;..\System\sys;..\System\spi;..\System\gpio;..\User\Main;..\User\GameEngine;..\User\Picture;..\User\SD;..\User\APP_Reader</IncludePath>
+              <IncludePath>..\User\Main;..\Core;..\Libraries\HAL_Lib\Inc;..\Libraries\FatFs;..\Libraries\FatFs\drivers;..\System\systick;..\System\sys;..\System\spi;..\System\gpio;..\System\tim;..\System\usart;..\System\adc;..\Hardware\led;..\Hardware\key;..\Hardware\lcd;..\Hardware\sdio;..\Hardware\hc25;..\Hardware\hc12;..\User\GameEngine;..\User\Picture;..\User\SD;..\User\WLAN;..\User\Clock;..\User\APP_Reader;..\User\APP_Video;..\User\APP_Plane;..\User\APP_Weather;..\User\APP_Setting;..\User\APP_JumpMan;..\User\APP_Ball;..\User\APP_Gobang;..\User\FxLib</IncludePath>
             </VariousControls>
           </Cads>
           <Aads>
@@ -425,31 +425,6 @@
             </File>
           </Files>
         </Group>
-        <Group>
-          <GroupName>System</GroupName>
-          <Files>
-            <File>
-              <FileName>delay.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\System\delay\delay.c</FilePath>
-            </File>
-            <File>
-              <FileName>sys.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\System\sys\sys.c</FilePath>
-            </File>
-            <File>
-              <FileName>spi.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\System\spi\spi.c</FilePath>
-            </File>
-            <File>
-              <FileName>gpio.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\System\gpio\gpio.c</FilePath>
-            </File>
-          </Files>
-        </Group>
         <Group>
           <GroupName>HAL_Lib</GroupName>
           <Files>
@@ -578,6 +553,61 @@
               <FileType>1</FileType>
               <FilePath>..\Libraries\HAL_Lib\Src\stm32h7xx_hal_spi_ex.c</FilePath>
             </File>
+            <File>
+              <FileName>stm32h7xx_hal_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\Libraries\HAL_Lib\Src\stm32h7xx_hal_uart.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32h7xx_hal_uart_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\Libraries\HAL_Lib\Src\stm32h7xx_hal_uart_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32h7xx_hal_usart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\Libraries\HAL_Lib\Src\stm32h7xx_hal_usart.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32h7xx_hal_usart_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\Libraries\HAL_Lib\Src\stm32h7xx_hal_usart_ex.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>System</GroupName>
+          <Files>
+            <File>
+              <FileName>sys.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\System\sys\sys.c</FilePath>
+            </File>
+            <File>
+              <FileName>spi.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\System\spi\spi.c</FilePath>
+            </File>
+            <File>
+              <FileName>tim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\System\tim\tim.c</FilePath>
+            </File>
+            <File>
+              <FileName>uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\System\usart\uart.c</FilePath>
+            </File>
+            <File>
+              <FileName>systick.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\System\systick\systick.c</FilePath>
+            </File>
+            <File>
+              <FileName>adc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\System\adc\adc.c</FilePath>
+            </File>
           </Files>
         </Group>
         <Group>
@@ -603,6 +633,16 @@
               <FileType>1</FileType>
               <FilePath>..\Hardware\sdio\sdio.c</FilePath>
             </File>
+            <File>
+              <FileName>hc25.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\Hardware\hc25\hc25.c</FilePath>
+            </File>
+            <File>
+              <FileName>hc12.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\Hardware\hc12\hc12.c</FilePath>
+            </File>
           </Files>
         </Group>
         <Group>
@@ -669,9 +709,9 @@
           <GroupName>Picture</GroupName>
           <Files>
             <File>
-              <FileName>pic_minecraft.c</FileName>
+              <FileName>Picture.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\User\Picture\pic_minecraft.c</FilePath>
+              <FilePath>..\User\Picture\Picture.c</FilePath>
             </File>
           </Files>
         </Group>
@@ -685,6 +725,26 @@
             </File>
           </Files>
         </Group>
+        <Group>
+          <GroupName>WLAN</GroupName>
+          <Files>
+            <File>
+              <FileName>WLAN.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\User\WLAN\WLAN.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Clock</GroupName>
+          <Files>
+            <File>
+              <FileName>Clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\User\Clock\Clock.c</FilePath>
+            </File>
+          </Files>
+        </Group>
         <Group>
           <GroupName>APP_Reader</GroupName>
           <Files>
@@ -695,6 +755,86 @@
             </File>
           </Files>
         </Group>
+        <Group>
+          <GroupName>APP_Video</GroupName>
+          <Files>
+            <File>
+              <FileName>APP_Video.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\User\APP_Video\APP_Video.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>APP_Plane</GroupName>
+          <Files>
+            <File>
+              <FileName>APP_Plane.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\User\APP_Plane\APP_Plane.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>APP_Weather</GroupName>
+          <Files>
+            <File>
+              <FileName>APP_Weather.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\User\APP_Weather\APP_Weather.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>APP_Setting</GroupName>
+          <Files>
+            <File>
+              <FileName>APP_Setting.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\User\APP_Setting\APP_Setting.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>APP_JumpMan</GroupName>
+          <Files>
+            <File>
+              <FileName>APP_JumpMan.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\User\APP_JumpMan\APP_JumpMan.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>APP_Ball</GroupName>
+          <Files>
+            <File>
+              <FileName>APP_Ball.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\User\APP_Ball\APP_Ball.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>APP_Gobang</GroupName>
+          <Files>
+            <File>
+              <FileName>APP_Gobang.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\User\APP_Gobang\APP_Gobang.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Fxlib</GroupName>
+          <Files>
+            <File>
+              <FileName>fxlib.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\User\FxLib\fxlib.c</FilePath>
+            </File>
+          </Files>
+        </Group>
       </Groups>
     </Target>
   </Targets>

README.md

@@ -1 +1,24 @@
 # STM32-Player
+
+基于 STM32H743 的多功能对战游戏机平台。
+
+## 功能介绍
+
++ **电子书阅读器**。支持 txt 文件，支持大、小两种字号，支持自动记录上次阅读到的位置。
++ **视频播放**。可以播放使用 [Video-Generator](https://github.com/StopPointTeam/Video-Generator) 处理后的视频。带有进度条。
++ **飞机大战**。一个简易的飞机大战游戏。
++ **天气查询**。向使用 [STM32-Player-Server](https://github.com/StopPointTeam/STM32-Player-Server) 搭建的服务器请求天气信息。
++ **五子棋联机对战**。五子棋点对点联机游戏。
++ **设置**。支持夜间模式。
+
+## 系统架构
+
+![](./_media/struct.png)
+
+## 参考资料
+
+[链接](https://github.com/StopPointTeam/STM32-Player-Doc)
+
+## 声明
+
+StopPointTeam 版权所有 2021

System/adc/adc.c

@@ -0,0 +1,170 @@
+//ADC 库
+
+#include "sys.h"
+#include "tim.h"
+
+#include "adc.h"
+
+//32 字节对齐
+ALIGN_32BYTES(uint16_t __attribute__((section(".RAM_D3"))) ADCxValues[2]);
+
+/**
+  * @brief  ADC 初始化函数
+  */
+void ADC_Init(void)
+{
+    ADC_HandleTypeDef AdcHandle = {0};
+    DMA_HandleTypeDef DMA_Handle = {0};
+    ADC_ChannelConfTypeDef sConfig = {0};
+    GPIO_InitTypeDef GPIO_InitStruct;
+
+    //配置时钟
+    RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
+    PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_ADC;
+    PeriphClkInitStruct.PLL2.PLL2M = 25;
+    PeriphClkInitStruct.PLL2.PLL2N = 504;
+    PeriphClkInitStruct.PLL2.PLL2P = 7;
+    PeriphClkInitStruct.PLL2.PLL2Q = 7;
+    PeriphClkInitStruct.PLL2.PLL2R = 7;
+    PeriphClkInitStruct.PLL2.PLL2RGE = RCC_PLL2VCIRANGE_0;
+    PeriphClkInitStruct.PLL2.PLL2VCOSEL = RCC_PLL2VCOWIDE;
+    PeriphClkInitStruct.PLL2.PLL2FRACN = 0;
+    PeriphClkInitStruct.AdcClockSelection = RCC_ADCCLKSOURCE_PLL2;
+    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
+    {
+        Error_Handler(__FILE__, __LINE__);
+    }
+
+    //GPIO
+    __HAL_RCC_GPIOC_CLK_ENABLE();
+
+    GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1;
+    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+    //DMA
+    __HAL_RCC_DMA1_CLK_ENABLE();
+    DMA_Handle.Instance = DMA1_Stream1;                            //使用的DMA1 Stream1
+    DMA_Handle.Init.Request = DMA_REQUEST_ADC3;                    //请求类型采用 DMA_REQUEST_ADC3
+    DMA_Handle.Init.Direction = DMA_PERIPH_TO_MEMORY;              //传输方向是从存储器到外设
+    DMA_Handle.Init.PeriphInc = DMA_PINC_DISABLE;                  //外设地址自增禁止
+    DMA_Handle.Init.MemInc = DMA_MINC_ENABLE;                      //存储器地址自增使能
+    DMA_Handle.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD; //外设数据传输位宽选择半字，即 16bit
+    DMA_Handle.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;    //存储器数据传输位宽选择半字，即 16bit
+    DMA_Handle.Init.Mode = DMA_CIRCULAR;                           //循环模式
+    DMA_Handle.Init.Priority = DMA_PRIORITY_LOW;                   //优先级低
+    DMA_Handle.Init.FIFOMode = DMA_FIFOMODE_DISABLE;               //禁止 FIFO
+    DMA_Handle.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
+    DMA_Handle.Init.MemBurst = DMA_MBURST_SINGLE;
+    DMA_Handle.Init.PeriphBurst = DMA_PBURST_SINGLE;
+
+    if (HAL_DMA_Init(&DMA_Handle) != HAL_OK)
+    {
+        Error_Handler(__FILE__, __LINE__);
+    }
+
+    //关联 ADC 句柄和 DMA 句柄
+    __HAL_LINKDMA(&AdcHandle, DMA_Handle, DMA_Handle);
+
+    //配置 ADC
+    __HAL_RCC_ADC3_CLK_ENABLE();
+    AdcHandle.Instance = ADC3;
+    AdcHandle.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV8;                      //采用PLL异步时钟，8分频，即 72MHz / 8 = 36MHz
+    AdcHandle.Init.Resolution = ADC_RESOLUTION_16B;                            //16 位分辨率
+    AdcHandle.Init.ScanConvMode = ADC_SCAN_ENABLE;                             //开启扫描
+    AdcHandle.Init.EOCSelection = ADC_EOC_SINGLE_CONV;                         //EOC 转换结束标志
+    AdcHandle.Init.LowPowerAutoWait = DISABLE;                                 //禁止低功耗自动延迟特性
+    AdcHandle.Init.ContinuousConvMode = ENABLE;                                //启用自动转换
+    AdcHandle.Init.NbrOfConversion = 2;                                        //使用了 2 个转换通道
+    AdcHandle.Init.DiscontinuousConvMode = DISABLE;                            //禁止不连续模式
+    AdcHandle.Init.NbrOfDiscConversion = 1;                                    //禁止不连续模式后，此参数忽略，此位是用来配置不连续子组中通道数
+    AdcHandle.Init.ExternalTrigConv = ADC_SOFTWARE_START;                      //采用软件触发
+    AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING;     //采用软件触发的话，此位忽略
+    AdcHandle.Init.ConversionDataManagement = ADC_CONVERSIONDATA_DMA_CIRCULAR; //DMA 循环模式接收 ADC 转换的数据
+    AdcHandle.Init.Overrun = ADC_OVR_DATA_OVERWRITTEN;                         //ADC 转换溢出的话，覆盖 ADC 的数据寄存器
+    AdcHandle.Init.OversamplingMode = DISABLE;                                 //禁止过采样
+
+    //初始化 ADC
+    if (HAL_ADC_Init(&AdcHandle) != HAL_OK)
+    {
+        Error_Handler(__FILE__, __LINE__);
+    }
+
+    //校准 ADC，采用偏移校准
+    if (HAL_ADCEx_Calibration_Start(&AdcHandle, ADC_CALIB_OFFSET, ADC_SINGLE_ENDED) != HAL_OK)
+    {
+        Error_Handler(__FILE__, __LINE__);
+    }
+
+    //序列 1，采样 PC0 引脚
+    sConfig.Channel = ADC_CHANNEL_10;
+    sConfig.Rank = ADC_REGULAR_RANK_1;
+    sConfig.SamplingTime = ADC_SAMPLETIME_810CYCLES_5; //采样周期
+    sConfig.SingleDiff = ADC_SINGLE_ENDED;             //单端输入
+    sConfig.OffsetNumber = ADC_OFFSET_NONE;            //无偏移
+    sConfig.Offset = 0;
+    sConfig.OffsetRightShift = DISABLE;       //禁止右移
+    sConfig.OffsetSignedSaturation = DISABLE; //禁止有符号饱和
+
+    if (HAL_ADC_ConfigChannel(&AdcHandle, &sConfig) != HAL_OK)
+    {
+        Error_Handler(__FILE__, __LINE__);
+    }
+
+    //序列 2，采样 PC1 引脚
+    sConfig.Channel = ADC_CHANNEL_11;
+    sConfig.Rank = ADC_REGULAR_RANK_2;
+    sConfig.SamplingTime = ADC_SAMPLETIME_810CYCLES_5;
+    sConfig.SingleDiff = ADC_SINGLE_ENDED;
+    sConfig.OffsetNumber = ADC_OFFSET_NONE;
+    sConfig.Offset = 0;
+    sConfig.OffsetRightShift = DISABLE;
+    sConfig.OffsetSignedSaturation = DISABLE;
+
+    if (HAL_ADC_ConfigChannel(&AdcHandle, &sConfig) != HAL_OK)
+    {
+        Error_Handler(__FILE__, __LINE__);
+    }
+
+    //启动 ADC 的 DMA 方式传输
+    if (HAL_ADC_Start_DMA(&AdcHandle, (uint32_t *)ADCxValues, 2) != HAL_OK)
+    {
+        Error_Handler(__FILE__, __LINE__);
+    }
+
+    //设置定时器
+    TIM_Set(TIM3, 1000, 0, 0);
+}
+
+/**
+  * @brief  获取 PC0 电压
+  * @retval 电压，单位 V
+  */
+float ADC_Get_PC0(void)
+{
+    return ADCxValues[0] * 3.3 / 65536;
+}
+
+/**
+  * @brief  获取 PC1 电压
+  * @retval 电压，单位 V
+  */
+float ADC_Get_PC1(void)
+{
+    return ADCxValues[1] * 3.3 / 65536;
+}
+
+/**
+  * @brief  TIM3 中断处理 
+  */
+void TIM3_IRQHandler(void)
+{
+    if ((TIM3->SR & TIM_FLAG_UPDATE) != RESET)
+    {
+        //清除更新标志
+        TIM3->SR = ~TIM_FLAG_UPDATE;
+
+        SCB_InvalidateDCache_by_Addr((uint32_t *)ADCxValues, sizeof(uint32_t));
+    }
+}

System/adc/adc.h

@@ -0,0 +1,10 @@
+//ADC ¿â
+
+#ifndef __ADC_H
+#define __ADC_H
+
+void ADC_Init(void);
+float ADC_Get_PC0(void);
+float ADC_Get_PC1(void);
+
+#endif

System/delay/delay.c

@@ -1,55 +0,0 @@
-//SYSCLK 初始化及延时函数
-
-#include "delay.h"
-
-static uint32_t fac_us = 0; //us 延时倍乘数
-
-/**
-  * @brief  初始化延迟函数
-  * @param  SYSCLK: 系统时钟频率
-  */
-void SYSCLK_Init(uint16_t SYSCLK)
-{
-
-    HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
-    fac_us = SYSCLK;
-}
-
-/**
-  * @brief  us 延迟函数
-  * @param  nus: us 数，不可超过 1000
-  */
-void Delay_us(uint32_t nus)
-{
-    uint32_t ticks, told, tnow;
-    uint32_t tcnt = 0;
-    uint32_t reload = SysTick->LOAD; //LOAD 的值
-    ticks = nus * fac_us;            //需要的节拍数
-    told = SysTick->VAL;             //当前计数器值
-
-    while (1)
-    {
-        tnow = SysTick->VAL;
-        if (tnow != told)
-        {
-            if (tnow < told)
-                tcnt += told - tnow;
-            else
-                tcnt += reload - tnow + told;
-            told = tnow;
-            if (tcnt >= ticks)
-                break;
-        }
-    };
-}
-
-/**
-  * @brief  ms 延迟函数
-  * @param  nms: ms 数
-  */
-void Delay_ms(uint16_t nms)
-{
-    uint32_t i;
-    for (i = 0; i < nms; i++)
-        Delay_us(1000);
-}

System/delay/delay.h

@@ -1,12 +0,0 @@
-//SYSCLK 初始化及延时函数
-
-#ifndef __DELAY_H
-#define __DELAY_H
-
-#include "sys.h"
-
-void SYSCLK_Init(uint16_t SYSCLK);
-void Delay_us(uint32_t nus);
-void Delay_ms(uint16_t nms);
-
-#endif

System/gpio/gpio.c

@@ -1,4 +1,4 @@
-//管理所有 GPIO 的初始化
+//管理 GPIO 的初始化
 
 #include "sys.h"
 
@@ -26,26 +26,33 @@ void GPIO_A1_Init(void)
 /************************************** GPIO E3 C5 **************************************/
 
 /**
-  * @brief  PE3 PC5 初始化，用于 KEY1 KEY2
+  * @brief  PE3 PC5 PD10 初始化，用于 KEY1 KEY2 KEY3
   */
-void GPIO_E3_C5_Init(void)
+void GPIO_E3_C5_D10_Init(void)
 {
     GPIO_InitTypeDef GPIO_Initure;
 
     __HAL_RCC_GPIOC_CLK_ENABLE(); //开启 PC 时钟
     __HAL_RCC_GPIOE_CLK_ENABLE(); //开启 PE 时钟
+    __HAL_RCC_GPIOD_CLK_ENABLE(); //开启 PD 时钟
 
-    GPIO_Initure.Pin = GPIO_PIN_3;                  //PE3：对应 K1
+    GPIO_Initure.Pin = GPIO_PIN_3;                  //PE3：对应 KEY1
     GPIO_Initure.Mode = GPIO_MODE_INPUT;            //输入
     GPIO_Initure.Pull = GPIO_PULLUP;                //上拉
     GPIO_Initure.Speed = GPIO_SPEED_FREQ_VERY_HIGH; //高速
     HAL_GPIO_Init(GPIOE, &GPIO_Initure);            //初始化 PE3
 
-    GPIO_Initure.Pin = GPIO_PIN_5;                  //PC5：对应 K2
+    GPIO_Initure.Pin = GPIO_PIN_5;                  //PC5：对应 KEY2
     GPIO_Initure.Mode = GPIO_MODE_INPUT;            //输入
     GPIO_Initure.Pull = GPIO_PULLUP;                //上拉
     GPIO_Initure.Speed = GPIO_SPEED_FREQ_VERY_HIGH; //高速
     HAL_GPIO_Init(GPIOC, &GPIO_Initure);            //初始化 PC5
+
+    GPIO_Initure.Pin = GPIO_PIN_10;                  //PC5：对应 KEY3
+    GPIO_Initure.Mode = GPIO_MODE_INPUT;            //输入
+    GPIO_Initure.Pull = GPIO_PULLUP;                //上拉
+    GPIO_Initure.Speed = GPIO_SPEED_FREQ_VERY_HIGH; //高速
+    HAL_GPIO_Init(GPIOD, &GPIO_Initure);            //初始化 PD10
 }
 
 /****************************************************************************************/

System/gpio/gpio.h

@@ -1,10 +1,10 @@
-//管理所有 GPIO 的初始化
+//管理 GPIO 的初始化
 
 #ifndef __GPIO_H
 #define __GPIO_H
 
 void GPIO_A1_Init(void);
-void GPIO_E3_C5_Init(void);
+void GPIO_E3_C5_D10_Init(void);
 void GPIO_B0_B1_B12_Init(void);
 
 #endif

System/sys/sys.c

@@ -1,4 +1,4 @@
-//系统初始化
+//系统常用调用
 
 #include "sys.h"
 
@@ -73,25 +73,23 @@ void Cache_Enable(void)
 
 /**
   * @brief  ³õʼ»¯ÏµÍ³Ê±ÖÓ
-  * @param  plln: PLL1 倍频系数（PLL倍频），取值范围：4~512
-  * @param  pllm: PLL1 预分频系数（进PLL之前的分频），取值范围：2~63
-  * @param  pllp: PLL1 的 p 分频系数（PLL之后的分频），分频后作为系统时钟，取值范围：2~128（且必须是 2 的倍数）
-  * @param  pllq: PLL1 的 q 分频系数（PLL之后的分频），取值范围：1~128.
-  * @retval 成功返回 0，失败返回 1
   */
-uint8_t Clock_Init(uint32_t plln, uint32_t pllm, uint32_t pllp, uint32_t pllq)
+void SystemClock_Init(void)
 {
-    HAL_StatusTypeDef ret = HAL_OK;
     RCC_ClkInitTypeDef RCC_ClkInitStruct;
     RCC_OscInitTypeDef RCC_OscInitStruct;
+    HAL_StatusTypeDef ret = HAL_OK;
 
+    //锁住SCU (Supply configuration update)
     MODIFY_REG(PWR->CR3, PWR_CR3_SCUEN, 0);
+
     __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
 
-    while ((PWR->D3CR & (PWR_D3CR_VOSRDY)) != PWR_D3CR_VOSRDY)
+    while (!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY))
     {
     }
 
+    //使能 HSE，并选择 HSE 作为 PLL 时钟源
     RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSEState = RCC_HSE_ON;
     RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
@@ -99,42 +97,47 @@ uint8_t Clock_Init(uint32_t plln, uint32_t pllm, uint32_t pllp, uint32_t pllq)
     RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
 
-    RCC_OscInitStruct.PLL.PLLN = plln;
+    RCC_OscInitStruct.PLL.PLLM = 5;
-    RCC_OscInitStruct.PLL.PLLM = pllm;
+    RCC_OscInitStruct.PLL.PLLN = 160;
-    RCC_OscInitStruct.PLL.PLLP = pllp;
+    RCC_OscInitStruct.PLL.PLLP = 2;
-    RCC_OscInitStruct.PLL.PLLQ = pllq;
+    RCC_OscInitStruct.PLL.PLLR = 2;
+    RCC_OscInitStruct.PLL.PLLQ = 4;
 
     RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE;
     RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2;
     ret = HAL_RCC_OscConfig(&RCC_OscInitStruct);
-    if (ret != HAL_OK)
-        return 1;
 
-    // QSPI_Enable_Memmapmode(); //QSPI内存映射模式,需要在时钟初始化之前开启,否则会有各种问题
+    /* 
-
+       选择 PLL 的输出作为系统时钟
-    RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK |
+       配置 RCC_CLOCKTYPE_SYSCLK 系统时钟
-                                   RCC_CLOCKTYPE_HCLK |
+       配置 RCC_CLOCKTYPE_HCLK 时钟，对应 AHB1 AHB2 AHB3 AHB4 总线
-                                   RCC_CLOCKTYPE_D1PCLK1 |
+       配置 RCC_CLOCKTYPE_PCLK1 时钟，对应 APB1 总线
-                                   RCC_CLOCKTYPE_PCLK1 |
+       配置 RCC_CLOCKTYPE_PCLK2 时钟，对应 APB2 总线
-                                   RCC_CLOCKTYPE_PCLK2 |
+       配置 RCC_CLOCKTYPE_D1PCLK1 时钟，对应 APB3 总线
-                                   RCC_CLOCKTYPE_D3PCLK1);
+       配置 RCC_CLOCKTYPE_D3PCLK1 时钟，对应 APB4 总线     
+    */
+    RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 |
+                                   RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1);
 
     RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
     RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
     RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2;
+    RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2;
     RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2;
     RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
-    RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2;
+    RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2;
-    RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV4;
+
-    ret = HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2);
+    ret = HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4);
-    if (ret != HAL_OK)
-        return 1;
 
     __HAL_RCC_CSI_ENABLE();
+
     __HAL_RCC_SYSCFG_CLK_ENABLE();
+
     HAL_EnableCompensationCell();
 
-    return 0;
+    __HAL_RCC_D2SRAM1_CLK_ENABLE();
+    __HAL_RCC_D2SRAM2_CLK_ENABLE();
+    __HAL_RCC_D2SRAM3_CLK_ENABLE();
 }
 
 /**
@@ -159,163 +162,13 @@ uint8_t Get_DCacheSta(void)
     return sta;
 }
 
-/**
+void Error_Handler(char *file, uint32_t line)
-  * @brief  QSPI 进入内存映射模式
-  */
-void QSPI_Enable_Memmapmode(void)
 {
-    uint32_t tempreg = 0;
+    printf("Wrong parameters value: file %s on line %d\r\n", file, line);
-    volatile uint32_t *data_reg = &QUADSPI->DR;
-    GPIO_InitTypeDef qspi_gpio;
 
-    RCC->AHB4ENR |= 1 << 1;  //使能 PORTB 时钟
+    if (line == 0)
-    RCC->AHB4ENR |= 1 << 5;  //使能 PORTF 时钟
+        return;
-    RCC->AHB3ENR |= 1 << 14; //QSPI 时钟使能
 
-    qspi_gpio.Pin = GPIO_PIN_6; //PB6 AF10
+    while (1)
-    qspi_gpio.Mode = GPIO_MODE_AF_PP;
+        ;
-    qspi_gpio.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-    qspi_gpio.Pull = GPIO_NOPULL;
-    qspi_gpio.Alternate = GPIO_AF10_QUADSPI;
-    HAL_GPIO_Init(GPIOB, &qspi_gpio);
-
-    qspi_gpio.Pin = GPIO_PIN_2; //PB2 AF9
-    qspi_gpio.Alternate = GPIO_AF9_QUADSPI;
-    HAL_GPIO_Init(GPIOB, &qspi_gpio);
-
-    qspi_gpio.Pin = GPIO_PIN_6 | GPIO_PIN_7; //PF6 7 AF9
-    qspi_gpio.Alternate = GPIO_AF9_QUADSPI;
-    HAL_GPIO_Init(GPIOF, &qspi_gpio);
-
-    qspi_gpio.Pin = GPIO_PIN_8 | GPIO_PIN_9; //PF8 9 AF10
-    qspi_gpio.Alternate = GPIO_AF10_QUADSPI;
-    HAL_GPIO_Init(GPIOF, &qspi_gpio);
-
-    //QSPI 设置，参考 QSPI 实验的 QSPI_Init 函数
-    RCC->AHB3RSTR |= 1 << 14;    //复位 QSPI
-    RCC->AHB3RSTR &= ~(1 << 14); //停止复位 QSPI
-    while (QUADSPI->SR & (1 << 5))
-        ;                      //等待 BUSY 位清零
-    QUADSPI->CR = 0X01000310;  //设置 CR 寄存器
-    QUADSPI->DCR = 0X00160401; //设置 DCR 寄存器
-    QUADSPI->CR |= 1 << 0;     //使能 QSPI
-
-    //注意：QSPI QE 位的使能，在 QSPI 烧写算法里面，就已经设置了
-    //所以，这里可以不用设置 QE 位，否则需要加入对 QE 位置 1 的代码
-    //不过，代码必须通过仿真器下载，直接烧录到外部 QSPI FLASH，是不可用的
-    //如果想直接烧录到外部 QSPI FLASH 也可以用，则需要在这里添加 QE 位置 1 的代码
-
-    //W25QXX 进入 QPI 模式（0X38指令）
-    while (QUADSPI->SR & (1 << 5))
-        ;                      //等待 BUSY 位清零
-    QUADSPI->CCR = 0X00000138; //发送 0X38 指令，W25QXX 进入 QPI 模式
-    while ((QUADSPI->SR & (1 << 1)) == 0)
-        ;                   //等待指令发送完成
-    QUADSPI->FCR |= 1 << 1; //清除发送完成标志位
-
-    //W25QXX 写使能（0X06指令）
-    while (QUADSPI->SR & (1 << 5))
-        ;                      //等待 BUSY 位清零
-    QUADSPI->CCR = 0X00000106; //发送 0X06 指令，W25QXX 写使能
-    while ((QUADSPI->SR & (1 << 1)) == 0)
-        ;                   //等待指令发送完成
-    QUADSPI->FCR |= 1 << 1; //清除发送完成标志位
-
-    //W25QXX 设置 QPI 相关读参数（0XC0）
-    while (QUADSPI->SR & (1 << 5))
-        ;                      //等待 BUSY 位清零
-    QUADSPI->CCR = 0X030003C0; //发送 0XC0 指令，W25QXX 读参数设置
-    QUADSPI->DLR = 0;
-    while ((QUADSPI->SR & (1 << 2)) == 0)
-        ;                                   //等待 FTF
-    *(volatile uint8_t *)data_reg = 3 << 4; //设置 P4&P5=11，8 个 dummy clocks，104M
-    QUADSPI->CR |= 1 << 2;                  //终止传输
-    while ((QUADSPI->SR & (1 << 1)) == 0)
-        ;                   //等待数据发送完成
-    QUADSPI->FCR |= 1 << 1; //清除发送完成标志位
-    while (QUADSPI->SR & (1 << 5))
-        ; //等待 BUSY 位清零
-
-    //MemroyMap 模式设置
-    while (QUADSPI->SR & (1 << 5))
-        ;                   //等待 BUSY 位清零
-    QUADSPI->ABR = 0;       //交替字节设置为 0，实际上就是 W25Q 0XEB 指令的 M0~M7=0
-    tempreg = 0XEB;         //INSTRUCTION[7:0]=0XEB，发送 0XEB 指令（Fast Read QUAD I/O）
-    tempreg |= 3 << 8;      //IMODE[1:0]=3，四线传输指令
-    tempreg |= 3 << 10;     //ADDRESS[1:0]=3，四线传输地址
-    tempreg |= 2 << 12;     //ADSIZE[1:0]=2，24位地址长度
-    tempreg |= 3 << 14;     //ABMODE[1:0]=3，四线传输交替字节
-    tempreg |= 0 << 16;     //ABSIZE[1:0]=0，8位交替字节 (M0~M7)
-    tempreg |= 6 << 18;     //DCYC[4:0]=6，6个dummy周期
-    tempreg |= 3 << 24;     //DMODE[1:0]=3，四线传输数据
-    tempreg |= 3 << 26;     //FMODE[1:0]=3，内存映射模式
-    QUADSPI->CCR = tempreg; //设置CCR寄存器
-
-    //设置 QSPI FLASH 空间的MPU保护
-    SCB->SHCSR &= ~(1 << 16);        //禁止 MemManage
-    MPU->CTRL &= ~(1 << 0);          //禁止 MPU
-    MPU->RNR = 0;                    //设置保护区域编号为 0 (1~7 可以给其他内存用)
-    MPU->RBAR = 0X90000000;          //基地址为 0X9000 000，即 QSPI 的起始地址
-    MPU->RASR = 0X0303002D;          //设置相关保护参数(禁止共用，允许 cache，允许缓冲)
-    MPU->CTRL = (1 << 2) | (1 << 0); //使能 PRIVDEFENA，使能 MPU
-    SCB->SHCSR |= 1 << 16;           //使能 MemManage
 }
-
-#if defined(__clang__) //使用V6编译器(clang)
-//THUMB指令不支持汇编内联
-//采用如下方法实现执行汇编指令WFI
-void __attribute__((noinline)) WFI_SET(void)
-{
-    __asm__("wfi");
-}
-
-//关闭所有中断(但是不包括fault和NMI中断)
-void __attribute__((noinline)) INTX_DISABLE(void)
-{
-    __asm__("cpsid i \t\n"
-            "bx lr");
-}
-
-//开启所有中断
-void __attribute__((noinline)) INTX_ENABLE(void)
-{
-    __asm__("cpsie i \t\n"
-            "bx lr");
-}
-
-//设置栈顶地址
-//addr:栈顶地址
-void __attribute__((noinline)) MSR_MSP(uint32_t addr)
-{
-    __asm__("msr msp, r0 \t\n"
-            "bx r14");
-}
-#elif defined(__CC_ARM) //使用V5编译器(ARMCC)
-
-//THUMB指令不支持汇编内联
-//采用如下方法实现执行汇编指令WFI
-__asm void WFI_SET(void)
-{
-    WFI;
-}
-//关闭所有中断(但是不包括fault和NMI中断)
-__asm void INTX_DISABLE(void)
-{
-    CPSID I
-        BX LR
-}
-//开启所有中断
-__asm void INTX_ENABLE(void)
-{
-    CPSIE I
-        BX LR
-}
-//设置栈顶地址
-//addr:栈顶地址
-__asm void MSR_MSP(uint32_t addr)
-{
-    MSR MSP, r0 //set Main Stack value
-                 BX r14
-}
-
-#endif

System/sys/sys.h

@@ -1,4 +1,4 @@
-//ϵͳ³õʼ»¯
+//系统常用调用
 
 #ifndef __SYS_H
 #define __SYS_H
@@ -7,25 +7,16 @@
 #include "core_cm7.h"
 #include "stm32h7xx_hal.h"
 
-#define Write_Through() (*(__IO uint32_t *)0XE000EF9C = 1UL << 2) //Cache ͸дģʽ
+//开关全局中断的宏
+#define ENABLE_INT() __set_PRIMASK(0)  //使能全局中断
+#define DISABLE_INT() __set_PRIMASK(1) //禁止全局中断
 
 void MPU_Config(void);
 void Cache_Enable(void);
-uint8_t Clock_Init(uint32_t plln, uint32_t pllm, uint32_t pllp, uint32_t pllq);
+void SystemClock_Init(void);
 uint8_t Get_ICacheSta(void);
 uint8_t Get_DCacheSta(void);
-void QSPI_Enable_Memmapmode(void);
 
-#if defined(__clang__)
+void Error_Handler(char *file, uint32_t line);
-void __attribute__((noinline)) WFI_SET(void);
-void __attribute__((noinline)) INTX_DISABLE(void);
-void __attribute__((noinline)) INTX_ENABLE(void);
-void __attribute__((noinline)) MSR_MSP(uint32_t addr);
-#elif defined(__CC_ARM)
-void WFI_SET(void);
-void INTX_DISABLE(void);
-void INTX_ENABLE(void);
-void MSR_MSP(uint32_t addr);
-#endif
 
 #endif

System/systick/systick.c

@@ -0,0 +1,276 @@
+//SysTick 及软件定时器库
+
+#include "key.h"
+#include "led.h"
+#include "Clock.h"
+
+#include "systick.h"
+
+static volatile uint32_t s_uiDelayCount = 0;
+static volatile uint8_t s_ucTimeOutFlag = 0;
+static SOFT_TMR s_tTmr[TMR_COUNT] = {0};          //软件定时器结构体变量
+volatile uint32_t g_iRunTime = 0;                 //全局运行时间，单位 ms
+static volatile uint8_t g_ucEnableSystickISR = 0; //等待变量初始化
+
+void SysTick_ISR(void);
+static void SysTick_SoftTimerDec(SOFT_TMR *_tmr);
+
+/**
+  * @brief  配置 SysTick 中断，并初始化软件定时器
+  */
+void SysTick_Init(void)
+{
+    //清零所有的软件定时器
+    for (uint8_t i = 0; i < TMR_COUNT; i++)
+    {
+        s_tTmr[i].Count = 0;
+        s_tTmr[i].PreLoad = 0;
+        s_tTmr[i].Flag = 0;
+        s_tTmr[i].Mode = TMR_ONCE_MODE; //缺省是一次性工作模式
+    }
+
+    //配置 SysTick 中断周期为 1ms，并启动 SysTick 中断
+    SysTick_Config(SystemCoreClock / 1000);
+
+    g_ucEnableSystickISR = 1; //执行systick中断
+}
+
+void SysTick_ISR(void)
+{
+    static uint8_t s_count = 0;
+    static uint16_t l_count = 0;
+
+    //用于 Delay_ms
+    if (s_uiDelayCount > 0)
+        if (--s_uiDelayCount == 0)
+            s_ucTimeOutFlag = 1;
+
+    //软件定时器的计数器减 1
+    for (uint8_t i = 0; i < TMR_COUNT; i++)
+        SysTick_SoftTimerDec(&s_tTmr[i]);
+
+    //全局运行时间增 1
+    g_iRunTime++;
+    if (g_iRunTime == UINT32_MAX)
+        g_iRunTime = 0;
+
+    //每隔 1ms 调用一次
+
+    if (++s_count >= 10)
+    {
+        s_count = 0;
+
+        //每隔 10ms 调用一次
+        KEY_Scan10ms();
+    }
+
+    if (++l_count >= 1000)
+    {
+        l_count = 0;
+
+        //每隔 1000ms 调用一次
+        Clock_Handler();
+    }
+}
+
+static void SysTick_SoftTimerDec(SOFT_TMR *_tmr)
+{
+    if (_tmr->Count > 0)
+    {
+        //如果定时器变量减到 1 则设置定时器到达标志
+        if (--_tmr->Count == 0)
+        {
+            _tmr->Flag = 1;
+
+            //如果是自动模式，则自动重装计数器
+            if (_tmr->Mode == TMR_AUTO_MODE)
+                _tmr->Count = _tmr->PreLoad;
+        }
+    }
+}
+
+/**
+  * @brief  ms 延时
+  * @param  n: 延时数
+  */
+void Delay_ms(uint32_t n)
+{
+    if (n == 0)
+        return;
+    else if (n == 1)
+        n = 2;
+
+    DISABLE_INT();
+
+    s_uiDelayCount = n;
+    s_ucTimeOutFlag = 0;
+
+    ENABLE_INT();
+
+    while (1)
+    {
+        if (s_ucTimeOutFlag == 1)
+            break;
+    }
+}
+
+/**
+  * @brief  us 延时
+  * @param  n: 延时数
+  */
+void Delay_us(uint32_t n)
+{
+    uint32_t ticks;
+    uint32_t told;
+    uint32_t tnow;
+    uint32_t tcnt = 0;
+    uint32_t reload;
+
+    reload = SysTick->LOAD;
+    ticks = n * (SystemCoreClock / 1000000); //需要的节拍数
+
+    tcnt = 0;
+    told = SysTick->VAL; //刚进入时的计数器值
+
+    while (1)
+    {
+        tnow = SysTick->VAL;
+        if (tnow != told)
+        {
+            if (tnow < told)
+                tcnt += told - tnow;
+            else
+                tcnt += reload - tnow + told;
+            told = tnow;
+
+            //时间超过、等于要延迟的时间，则退出
+            if (tcnt >= ticks)
+                break;
+        }
+    }
+}
+
+/**
+  * @brief  启动一个定时器，并设置定时周期
+  * @param  _id: 定时器 ID
+  * @param  _period: 定时周期，单位 ms
+  */
+void SysTick_StartTimer(uint8_t _id, uint32_t _period)
+{
+    DISABLE_INT();
+
+    s_tTmr[_id].Count = _period;      //实时计数器初值
+    s_tTmr[_id].PreLoad = _period;    //计数器自动重装值，仅自动模式起作用
+    s_tTmr[_id].Flag = 0;             //定时时间到标志
+    s_tTmr[_id].Mode = TMR_ONCE_MODE; //一次性工作模式
+
+    ENABLE_INT();
+}
+
+/**
+  * @brief  启动一个自动定时器，并设置定时周期
+  * @param  _id: 定时器 ID
+  * @param  _period: 定时周期，单位 ms
+  */
+void SysTick_StartAutoTimer(uint8_t _id, uint32_t _period)
+{
+    DISABLE_INT();
+
+    s_tTmr[_id].Count = _period;      //实时计数器初值
+    s_tTmr[_id].PreLoad = _period;    //计数器自动重装值，仅自动模式起作用
+    s_tTmr[_id].Flag = 0;             //定时时间到标志
+    s_tTmr[_id].Mode = TMR_AUTO_MODE; //自动工作模式
+
+    ENABLE_INT();
+}
+
+/**
+  * @brief  停止一个定时器
+  * @param  _id: 定时器 ID
+  */
+void SysTick_StopTimer(uint8_t _id)
+{
+    DISABLE_INT();
+
+    s_tTmr[_id].Count = 0;            //实时计数器初值
+    s_tTmr[_id].Flag = 0;             //定时时间到标志
+    s_tTmr[_id].Mode = TMR_ONCE_MODE; //自动工作模式
+
+    ENABLE_INT();
+}
+
+/**
+  * @brief  检测定时器是否超时
+  * @param  _id: 定时器 ID
+  * @param  _period: 定时周期
+  * @retval 返回 0 表示定时未到，1 表示定时到
+  */
+uint8_t SysTick_CheckTimer(uint8_t _id)
+{
+    if (_id >= TMR_COUNT)
+        return 0;
+
+    if (s_tTmr[_id].Flag == 1)
+    {
+        s_tTmr[_id].Flag = 0;
+        return 1;
+    }
+    else
+    {
+        return 0;
+    }
+}
+
+/**
+  * @brief  获取运行时间，单位 ms。最长可以表示 24.85 天
+  * @retval 运行时间
+  */
+int32_t SysTick_GetRunTime(void)
+{
+    int32_t runtime;
+
+    DISABLE_INT();
+
+    runtime = g_iRunTime;
+
+    ENABLE_INT();
+
+    return runtime;
+}
+
+/**
+  * @brief  计算当前运行时间和给定时刻之间的差值。处理了计数器循环
+  * @param  _LastTime: 上个时刻
+  * @retval 当前时间和过去时间的差值，单位 ms
+  */
+int32_t SysTick_CheckRunTime(int32_t _LastTime)
+{
+    int32_t now_time;
+    int32_t time_diff;
+
+    DISABLE_INT();
+
+    now_time = g_iRunTime;
+
+    ENABLE_INT();
+
+    if (now_time >= _LastTime)
+        time_diff = now_time - _LastTime;
+    else
+        time_diff = INT32_MAX - _LastTime + now_time;
+
+    return time_diff;
+}
+
+/**
+  * @brief  SysTick 中断服务程序
+  */
+void SysTick_Handler(void)
+{
+    HAL_IncTick();
+
+    if (g_ucEnableSystickISR == 0)
+        return;
+
+    SysTick_ISR();
+}

System/systick/systick.h

@@ -0,0 +1,36 @@
+//SysTick 及软件定时器库
+
+#ifndef __SYSTICK_H
+#define __SYSTICK_H
+
+#include "sys.h"
+
+#define TMR_COUNT 4 //软件定时器的个数
+
+//定时器结构体工作模式
+typedef enum
+{
+    TMR_ONCE_MODE = 0, //一次工作模式
+    TMR_AUTO_MODE = 1  //自动定时工作模式
+} TMR_MODE_E;
+
+//定时器结构体
+typedef struct
+{
+    volatile uint8_t Mode;     //计数器模式
+    volatile uint8_t Flag;     //定时到达标志
+    volatile uint32_t Count;   //计数器
+    volatile uint32_t PreLoad; //计数器预装值
+} SOFT_TMR;
+
+void SysTick_Init(void);
+void Delay_ms(uint32_t n);
+void Delay_us(uint32_t n);
+void SysTick_StartTimer(uint8_t _id, uint32_t _period);
+void SysTick_StartAutoTimer(uint8_t _id, uint32_t _period);
+void SysTick_StopTimer(uint8_t _id);
+uint8_t SysTick_CheckTimer(uint8_t _id);
+int32_t SysTick_GetRunTime(void);
+int32_t SysTick_CheckRunTime(int32_t _LastTime);
+
+#endif

System/tim/tim.c

@@ -0,0 +1,123 @@
+//硬件定时器库
+
+#include "sys.h"
+
+#include "tim.h"
+
+/**
+  * @brief  开启定时中断
+  * @param  TIMx: 定时器
+  * @param  _ulFreq: 定时频率 (Hz)。0 表示关闭
+  * @param  _PreemptionPriority: 抢占优先级
+  * @param  _SubPriority: 子优先级
+  */
+void TIM_Set(TIM_TypeDef *TIMx, double _ulFreq, uint8_t _PreemptionPriority, uint8_t _SubPriority)
+{
+    TIM_HandleTypeDef TimHandle = {0};
+    uint16_t usPeriod;
+    uint16_t usPrescaler;
+    uint32_t uiTIMxCLK;
+
+    //使能TIM时钟
+    if (TIMx == TIM1)
+        __HAL_RCC_TIM1_CLK_ENABLE();
+    else if (TIMx == TIM2)
+        __HAL_RCC_TIM2_CLK_ENABLE();
+    else if (TIMx == TIM3)
+        __HAL_RCC_TIM3_CLK_ENABLE();
+    else if (TIMx == TIM4)
+        __HAL_RCC_TIM4_CLK_ENABLE();
+    else if (TIMx == TIM5)
+        __HAL_RCC_TIM5_CLK_ENABLE();
+    else if (TIMx == TIM6)
+        __HAL_RCC_TIM6_CLK_ENABLE();
+    else if (TIMx == TIM7)
+        __HAL_RCC_TIM7_CLK_ENABLE();
+    else if (TIMx == TIM8)
+        __HAL_RCC_TIM8_CLK_ENABLE();
+    else if (TIMx == TIM12)
+        __HAL_RCC_TIM12_CLK_ENABLE();
+    else if (TIMx == TIM13)
+        __HAL_RCC_TIM13_CLK_ENABLE();
+    else if (TIMx == TIM14)
+        __HAL_RCC_TIM14_CLK_ENABLE();
+    else if (TIMx == TIM15)
+        __HAL_RCC_TIM15_CLK_ENABLE();
+    else if (TIMx == TIM16)
+        __HAL_RCC_TIM16_CLK_ENABLE();
+    else if (TIMx == TIM17)
+        __HAL_RCC_TIM17_CLK_ENABLE();
+
+    if ((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM15) || (TIMx == TIM16) || (TIMx == TIM17))
+        uiTIMxCLK = SystemCoreClock / 2; //APB2 定时器时钟 = 200M
+    else
+        uiTIMxCLK = SystemCoreClock / 2; //APB1 定时器 = 200M
+
+    if (_ulFreq < 100)
+    {
+        usPrescaler = 10000 - 1;                                  //分频比 = 10000
+        usPeriod = ((double)uiTIMxCLK / 10000.0) / _ulFreq - 1.0; //自动重装的值
+    }
+    else if (_ulFreq < 3000)
+    {
+        usPrescaler = 100 - 1;                                  //分频比 = 100
+        usPeriod = ((double)uiTIMxCLK / 100.0) / _ulFreq - 1.0; //自动重装的值
+    }
+    else //大于 4k 的频率
+    {
+        usPrescaler = 0;                              //分频比 = 1
+        usPeriod = (double)uiTIMxCLK / _ulFreq - 1.0; //自动重装的值
+    }
+
+    //定时器中断更新周期
+    TimHandle.Instance = TIMx;
+    TimHandle.Init.Prescaler = usPrescaler;
+    TimHandle.Init.Period = usPeriod;
+    TimHandle.Init.ClockDivision = 0;
+    TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
+    TimHandle.Init.RepetitionCounter = 0;
+    TimHandle.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE;
+    HAL_TIM_Base_Init(&TimHandle);
+
+    //使能定时器中断
+    __HAL_TIM_ENABLE_IT(&TimHandle, TIM_IT_UPDATE);
+
+    //配置TIM定时更新中断
+    {
+        uint8_t irq = 0;
+
+        if (TIMx == TIM1)
+            irq = TIM1_UP_IRQn;
+        else if (TIMx == TIM2)
+            irq = TIM2_IRQn;
+        else if (TIMx == TIM3)
+            irq = TIM3_IRQn;
+        else if (TIMx == TIM4)
+            irq = TIM4_IRQn;
+        else if (TIMx == TIM5)
+            irq = TIM5_IRQn;
+        else if (TIMx == TIM6)
+            irq = TIM6_DAC_IRQn;
+        else if (TIMx == TIM7)
+            irq = TIM7_IRQn;
+        else if (TIMx == TIM8)
+            irq = TIM8_UP_TIM13_IRQn;
+        else if (TIMx == TIM12)
+            irq = TIM8_BRK_TIM12_IRQn;
+        else if (TIMx == TIM13)
+            irq = TIM8_UP_TIM13_IRQn;
+        else if (TIMx == TIM14)
+            irq = TIM8_TRG_COM_TIM14_IRQn;
+        else if (TIMx == TIM15)
+            irq = TIM15_IRQn;
+        else if (TIMx == TIM16)
+            irq = TIM16_IRQn;
+        else if (TIMx == TIM17)
+            irq = TIM17_IRQn;
+
+        HAL_NVIC_SetPriority((IRQn_Type)irq, _PreemptionPriority, _SubPriority);
+        HAL_NVIC_EnableIRQ((IRQn_Type)irq);
+    }
+
+    HAL_TIM_Base_Start(&TimHandle);
+}

System/tim/tim.h

@@ -0,0 +1,8 @@
+//硬件定时器库
+
+#ifndef __TIM_H
+#define __TIM_H
+
+void TIM_Set(TIM_TypeDef *TIMx, double _ulFreq, uint8_t _PreemptionPriority, uint8_t _SubPriority);
+
+#endif

System/usart/uart.h

@@ -0,0 +1,123 @@
+//UART 库
+
+#ifndef __UART_H
+#define __UART_H
+
+#define UART1_FIFO_EN 1 //调试用串口
+#define UART2_FIFO_EN 1 //WiFi 透传
+#define UART3_FIFO_EN 1 //HC-12
+#define UART4_FIFO_EN 0
+#define UART5_FIFO_EN 0
+#define UART6_FIFO_EN 0
+#define UART7_FIFO_EN 0
+#define UART8_FIFO_EN 0
+
+//定义端口号
+typedef enum
+{
+    COM1 = 0, //USART1
+    COM2 = 1, //USART2
+    COM3 = 2, //USART3
+    COM4 = 3, //UART4
+    COM5 = 4, //UART5
+    COM6 = 5, //USART6
+    COM7 = 6, //UART7
+    COM8 = 7  //UART8
+} COM_PORT_E;
+
+//定义串口波特率和FIFO缓冲区大小，分为发送缓冲区和接收缓冲区, 支持全双工
+#if UART1_FIFO_EN == 1
+#define UART1_BAUD 115200
+#define UART1_TX_BUF_SIZE 1 * 1024
+#define UART1_RX_BUF_SIZE 1 * 1024
+#endif
+
+#if UART2_FIFO_EN == 1
+#define UART2_BAUD 115200
+#define UART2_TX_BUF_SIZE 1 * 1024
+#define UART2_RX_BUF_SIZE 1 * 1024
+#endif
+
+#if UART3_FIFO_EN == 1
+#define UART3_BAUD 9600
+#define UART3_TX_BUF_SIZE 1 * 1024
+#define UART3_RX_BUF_SIZE 1 * 1024
+#endif
+
+#if UART4_FIFO_EN == 1
+#define UART4_BAUD 115200
+#define UART4_TX_BUF_SIZE 1 * 1024
+#define UART4_RX_BUF_SIZE 1 * 1024
+#endif
+
+#if UART5_FIFO_EN == 1
+#define UART5_BAUD 115200
+#define UART5_TX_BUF_SIZE 1 * 1024
+#define UART5_RX_BUF_SIZE 1 * 1024
+#endif
+
+#if UART6_FIFO_EN == 1
+#define UART6_BAUD 115200
+#define UART6_TX_BUF_SIZE 1 * 1024
+#define UART6_RX_BUF_SIZE 1 * 1024
+#endif
+
+#if UART7_FIFO_EN == 1
+#define UART7_BAUD 115200
+#define UART7_TX_BUF_SIZE 1 * 1024
+#define UART7_RX_BUF_SIZE 1 * 1024
+#endif
+
+#if UART8_FIFO_EN == 1
+#define UART8_BAUD 115200
+#define UART8_TX_BUF_SIZE 1 * 1024
+#define UART8_RX_BUF_SIZE 1 * 1024
+#endif
+
+//回调函数定义
+typedef void (*UartSendBeforeHandler)(void);
+typedef void (*UartSendOverHandler)(void);
+typedef void (*UartReceiveHandler)(uint8_t _byte);
+
+//串口设备结构体
+typedef struct
+{
+    USART_TypeDef *uart;     //内部串口设备指针
+    uint8_t *pTxBuf;         //发送缓冲区
+    uint8_t *pRxBuf;         //接收缓冲区
+    uint16_t usTxBufSize;    //发送缓冲区大小
+    uint16_t usRxBufSize;    //接收缓冲区大小
+    __IO uint16_t usTxWrite; //发送缓冲区写指针
+    __IO uint16_t usTxRead;  //发送缓冲区读指针
+    __IO uint16_t usTxCount; //等待发送的数据个数
+
+    __IO uint16_t usRxWrite; //接收缓冲区写指针
+    __IO uint16_t usRxRead;  //接收缓冲区读指针
+    __IO uint16_t usRxCount; //还未读取的新数据个数
+
+    UartSendBeforeHandler SendBefore; //开始发送之前的回调函数指针
+    UartSendOverHandler SendOver;     //发送完毕的回调函数指针
+    UartReceiveHandler Receive;       //串口收到数据的回调函数指针
+
+    uint8_t Sending; //正在发送中
+} UART_T;
+
+void Uart_Init(void);
+void Uart_SendBuf(COM_PORT_E _ucPort, uint8_t *_ucaBuf, uint16_t _usLen);
+void Uart_SendChar(COM_PORT_E _ucPort, uint8_t _ucByte);
+uint8_t Uart_GetChar(COM_PORT_E _ucPort, uint8_t *_pByte);
+uint8_t Uart_GetBuffUntil(COM_PORT_E _ucPort, uint8_t *_pBuf, uint8_t _endByte, uint16_t _timeout);
+void Uart_ClearTxFifo(COM_PORT_E _ucPort);
+void Uart_ClearRxFifo(COM_PORT_E _ucPort);
+void Uart_SetBaud(COM_PORT_E _ucPort, uint32_t _BaudRate);
+void Uart_SetUartParam(USART_TypeDef *Instance, uint32_t BaudRate, uint32_t Parity, uint32_t Mode);
+uint8_t Uart_IsTxEmpty(COM_PORT_E _ucPort);
+
+void Uart_BindSendBeforeHandle(COM_PORT_E _ucPort, UartSendBeforeHandler SendBefore);
+void Uart_BindSendOverHandle(COM_PORT_E _ucPort, UartSendOverHandler SendOver);
+void Uart_BindReceiveHandle(COM_PORT_E _ucPort, UartReceiveHandler Receive);
+
+void Uart_SetprintfCom(COM_PORT_E _ucPort);
+void Uart_SetgetcharCom(COM_PORT_E _ucPort);
+
+#endif

User/APP_Ball/APP_Ball.c

@@ -0,0 +1,162 @@
+//移动球应用
+
+#include "stdio.h"
+
+#include "sys.h"
+#include "systick.h"
+
+#include "key.h"
+#include "lcd.h"
+#include "hc12.h"
+
+#include "GameEngine.h"
+
+#include "APP_Ball.h"
+
+/**************************************** 私有定义 ****************************************/
+
+#define START_BYTE '&'
+
+typedef struct
+{
+    uint16_t x;
+    uint16_t y;
+} Ball;
+
+/*****************************************************************************************/
+
+/**************************************** 全局变量 ****************************************/
+
+Ball ball;
+
+/*****************************************************************************************/
+
+/**************************************** 私有函数 ****************************************/
+
+void APP_Ball_DispBall(void);
+void APP_Ball_Send(void);
+void APP_Ball_Receive(uint8_t byte);
+void WriteMem(void *pdata, uint32_t len, uint8_t *list);
+
+/*****************************************************************************************/
+
+/**
+  * @brief  启动移动球
+  */
+void APP_Ball_Launcher(void)
+{
+    HC12_BindReceiveHandle(APP_Ball_Receive);
+
+    ball.x = 0;
+    ball.y = 0;
+
+    APP_Ball_DispBall();
+
+    while (1)
+    {
+        switch (KEY_GetKeyWait())
+        {
+        case JOY_U_DOWN:
+        {
+            if (ball.y - 2 >= 0)
+            {
+                ball.y -= 2;
+                APP_Ball_DispBall();
+
+                APP_Ball_Send();
+            }
+        }
+        break;
+
+        case JOY_D_DOWN:
+        {
+            if (ball.y + 2 <= LCD_HEIGHT)
+            {
+                ball.y += 2;
+                APP_Ball_DispBall();
+
+                APP_Ball_Send();
+            }
+        }
+        break;
+
+        case JOY_L_DOWN:
+        {
+            if (ball.x - 2 >= 0)
+            {
+                ball.x -= 2;
+                APP_Ball_DispBall();
+
+                APP_Ball_Send();
+            }
+        }
+        break;
+
+        case JOY_R_DOWN:
+        {
+            if (ball.x + 2 <= LCD_WIDTH)
+            {
+                ball.x += 2;
+                APP_Ball_DispBall();
+
+                APP_Ball_Send();
+            }
+        }
+        }
+    }
+}
+
+void APP_Ball_DispBall(void)
+{
+    GE_Draw_ClrAll(WHITE);
+    GE_Draw_FillCircle(ball.x, ball.y, 10, BLUE);
+    GE_Draw_Disp();
+}
+
+void APP_Ball_Send(void)
+{
+    Ball pack;
+    pack.x = ball.x;
+    pack.y = ball.y;
+
+    char start_byte = START_BYTE;
+    HC12_SendBuff(&start_byte, sizeof(start_byte));
+    HC12_SendBuff(&pack, sizeof(Ball));
+}
+
+void APP_Ball_Receive(uint8_t byte)
+{
+    static uint8_t is_receiving = FALSE;
+    static uint8_t list[4];
+    static uint8_t list_i = 0;
+
+    if (is_receiving == FALSE && byte == START_BYTE)
+    {
+        is_receiving = TRUE;
+        return;
+    }
+
+    if (is_receiving == TRUE)
+    {
+        list[list_i] = byte;
+        list_i++;
+
+        if (list_i == 4)
+        {
+            WriteMem(&ball, sizeof(Ball), list);
+            APP_Ball_DispBall();
+            list_i = 0;
+            is_receiving = FALSE;
+
+            printf("收到小球位置：x=%d y=%d\n", ball.x, ball.y);
+        }
+    }
+}
+
+void WriteMem(void *pdata, uint32_t len, uint8_t *list)
+{
+    uint8_t *p = (uint8_t *)pdata;
+
+    for (uint32_t i = 0; i < len; i++)
+        p[i] = list[i];
+}

User/APP_Ball/APP_Ball.h

@@ -0,0 +1,8 @@
+//移动球应用
+
+#ifndef __APP_BALL
+#define __APP_BALL
+
+void APP_Ball_Launcher(void);
+
+#endif

User/APP_Gobang/APP_Gobang.c

@@ -0,0 +1,633 @@
+//五子棋应用
+
+#include "stdlib.h"
+
+#include "sys.h"
+#include "systick.h"
+
+#include "key.h"
+#include "lcd.h"
+#include "hc12.h"
+
+#include "GameEngine.h"
+
+#include "APP_Gobang.h"
+
+/**************************************** 私有定义 ****************************************/
+
+#define MAP_COLOR 0xdc84
+
+#define BROADWIDTH 15
+#define WIDTH (BROADWIDTH + 1)
+
+#define BLACK_TURN 0
+#define WHITE_TURN 1
+
+#define NO_CHESS 0
+#define BLACK_CHESS 1
+#define WHITE_CHESS 2
+
+#define CHECK_X 0
+#define CHECK_Y 1
+#define CHECK_DIAG_LEFT 2
+#define CHECK_DIAG_RIGHT 3
+
+#define CHESS_RADIUS 5
+
+#define CONNETING_STATUS 0
+#define BATTLING_STATUS 1
+
+#define NONE_MSG 0
+#define REQUEST_MSG 'R'
+#define AGREE_MSG 'A'
+#define REFUSE_MSG 'N'
+#define CONFIRM_MSG 'X'
+
+#define START_BYTE '#'
+#define END_BYTE '&'
+
+#define Random() rand()
+
+/*****************************************************************************************/
+
+/**************************************** 全局变量 ****************************************/
+//棋盘交点阵
+int map[WIDTH][WIDTH] = {{0, 0}};
+
+//光标位置
+int cursor_x = 7;
+int cursor_y = 7;
+
+//记录执子方
+int turn = BLACK_TURN;
+
+//棋子类型
+int chess_kind = BLACK_CHESS;
+
+//我方执子类型
+int my_turn = BLACK_TURN;
+
+//当前所处状态
+int status = CONNETING_STATUS;
+
+//联机消息
+uint8_t connetion_msg = NONE_MSG;
+
+uint8_t interval = 240 / WIDTH;
+uint16_t x_start, x_end, y_start, y_end;
+
+/*****************************************************************************************/
+
+/**************************************** 私有函数 ****************************************/
+
+void APP_Gobang_Init(void);
+void APP_Gobang_DispGobang(void);
+void APP_Gobang_DispText(void);
+void APP_Gobang_DispMap(void);
+void APP_Gobang_DispChess(void);
+void APP_Gobang_MoveChess(void);
+void APP_Gobang_DispCursor(void);
+int APP_Gobang_CheckNum(int check_type);
+void APP_Gobang_Msg(uint8_t *head, uint8_t *content);
+void APP_Gobang_SendPosition(void);
+void APP_Gobang_RevPosition(void);
+uint8_t APP_Gobang_Connect(void);
+uint8_t APP_Gobang_InitiateConnet(void);
+uint8_t APP_Gobang_ReplyConnect(void);
+void APP_Gobang_DecideMyTurn(void);
+void APP_Gobang_RevMyTurn(void);
+void APP_Gobang_ConfirmBeforeStart(void);
+void APP_Gobang_ConnectRevHandler(uint8_t byte);
+
+/*****************************************************************************************/
+
+/**
+  * @brief  启动五子棋
+  */
+void APP_Gobang_Launcher(void)
+{
+    srand(SysTick->VAL);
+    APP_Gobang_Init();
+    APP_Gobang_DispGobang();
+    if (APP_Gobang_Connect() == 0)
+        return;
+    status = BATTLING_STATUS;
+    HC12_BindReceiveHandle(NULL);
+    HC12_ClearReceive;
+    KEY_ClearKey();
+
+    while (1)
+    {
+        APP_Gobang_DispGobang();
+
+        if (turn == my_turn)
+            APP_Gobang_MoveChess();
+        else
+            APP_Gobang_RevPosition();
+
+        turn = !turn; //更换执子方
+
+        //判断胜负
+        if (
+            APP_Gobang_CheckNum(CHECK_X) >= 5 ||
+            APP_Gobang_CheckNum(CHECK_Y) >= 5 ||
+            APP_Gobang_CheckNum(CHECK_DIAG_LEFT) >= 5 ||
+            APP_Gobang_CheckNum(CHECK_DIAG_RIGHT) >= 5)
+        {
+            if ((chess_kind == BLACK_CHESS && my_turn == BLACK_TURN) || (chess_kind == WHITE_CHESS && my_turn == WHITE_TURN))
+                APP_Gobang_Msg("游戏结束", "恭喜您获得胜利！按“L”退出游戏");
+            else
+                APP_Gobang_Msg("游戏结束", "很遗憾，您输了！按“L”退出游戏");
+
+            return;
+        }
+    }
+}
+
+/**
+  * @brief  初始化变量
+  */
+void APP_Gobang_Init(void)
+{
+    ge_font_print_set.font_size = FONT_16;
+
+    for (int i = 0; i < WIDTH; i++)
+        for (int j = 0; j < WIDTH; j++)
+            map[i][j] = NO_CHESS;
+
+    cursor_x = cursor_y = 7;
+    turn = BLACK_TURN;
+    chess_kind = BLACK_CHESS;
+    status = CONNETING_STATUS;
+    connetion_msg = NONE_MSG;
+
+    x_start = (LCD_WIDTH - LCD_HEIGHT) / 2 + interval / 2;
+    x_end = x_start + (WIDTH - 1) * interval;
+    y_start = interval / 2;
+    y_end = y_start + (WIDTH - 1) * interval;
+}
+
+/**
+  * @brief  绘制游戏
+  */
+void APP_Gobang_DispGobang(void)
+{
+    GE_Draw_ClrAll(MAP_COLOR);
+    APP_Gobang_DispMap();
+    APP_Gobang_DispChess();
+    APP_Gobang_DispCursor();
+    if (status == BATTLING_STATUS)
+        APP_Gobang_DispText();
+    GE_Draw_Disp();
+}
+
+/**
+  * @brief  绘制文字
+  * @param  head: 标题
+  * @param  content: 内容
+  */
+void APP_Gobang_DispText(void)
+{
+    if (turn == my_turn)
+        GE_Font_Print_WithSet(LCD_WIDTH - FONT_16 * 2, interval / 2, BORDER_MAX, BORDER_MAX, "我方");
+    else
+        GE_Font_Print_WithSet(LCD_WIDTH - FONT_16 * 2, interval / 2, BORDER_MAX, BORDER_MAX, "对方");
+    GE_Font_Print_WithSet(LCD_WIDTH - FONT_16 * 2, interval / 2 + FONT_16, BORDER_MAX, BORDER_MAX, "回合");
+
+    GE_Font_Print_WithSet(LCD_WIDTH - FONT_16 * 2, LCD_HEIGHT - interval / 2 - 2 * FONT_16, BORDER_MAX, BORDER_MAX, "我方");
+    if (my_turn == BLACK_TURN)
+        GE_Font_Print_WithSet(LCD_WIDTH - FONT_16 * 2, LCD_HEIGHT - interval / 2 - FONT_16, BORDER_MAX, BORDER_MAX, "执黑");
+    else
+        GE_Font_Print_WithSet(LCD_WIDTH - FONT_16 * 2, LCD_HEIGHT - interval / 2 - FONT_16, BORDER_MAX, BORDER_MAX, "执白");
+}
+
+/**
+  * @brief  绘制棋盘
+  */
+void APP_Gobang_DispMap(void)
+{
+    uint8_t i = 0;
+    for (i = 0; i < WIDTH; i++)
+    {
+        GE_Draw_Line(x_start, y_start + i * interval, x_end, y_start + i * interval, BLACK);
+        GE_Draw_Line(x_start + i * interval, y_start, x_start + i * interval, y_end, BLACK);
+    }
+}
+
+/**
+  * @brief  绘制棋子
+  */
+void APP_Gobang_DispChess(void)
+{
+    uint8_t i, j;
+    for (i = 0; i < WIDTH; i++)
+    {
+        for (j = 0; j < WIDTH; j++)
+        {
+            if (map[i][j] == BLACK_CHESS)
+            {
+                GE_Draw_FillCircle(x_start + j * interval, y_start + i * interval, CHESS_RADIUS, BLACK);
+            }
+            else if (map[i][j] == WHITE_CHESS)
+            {
+                GE_Draw_FillCircle(x_start + j * interval, y_start + i * interval, CHESS_RADIUS, WHITE);
+            }
+        }
+    }
+}
+
+/**
+  * @brief  移动棋子
+  */
+void APP_Gobang_MoveChess(void)
+{
+    KEY_ClearKey();
+    while (1)
+    {
+        switch (KEY_GetKeyWait())
+        {
+        case JOY_U_DOWN:
+        {
+            cursor_x--;
+
+            if (cursor_x < 0)
+                cursor_x = WIDTH - 1;
+
+            APP_Gobang_DispGobang();
+        }
+        break;
+
+        case JOY_D_DOWN:
+        {
+            cursor_x++;
+
+            if (cursor_x > WIDTH - 1)
+                cursor_x = 0;
+
+            APP_Gobang_DispGobang();
+        }
+        break;
+
+        case JOY_L_DOWN:
+        {
+            cursor_y--;
+
+            if (cursor_y < 0)
+                cursor_y = WIDTH - 1;
+
+            APP_Gobang_DispGobang();
+        }
+        break;
+
+        case JOY_R_DOWN:
+        {
+            cursor_y++;
+
+            if (cursor_y > WIDTH - 1)
+                cursor_y = 0;
+
+            APP_Gobang_DispGobang();
+        }
+        break;
+
+        case JOY_OK_DOWN:
+        {
+            if (map[cursor_x][cursor_y] != NO_CHESS)
+                break;
+
+            chess_kind = map[cursor_x][cursor_y] = turn == BLACK_TURN ? BLACK_CHESS : WHITE_CHESS;
+            APP_Gobang_SendPosition();
+            APP_Gobang_DispGobang();
+            return;
+        }
+        }
+    }
+}
+
+/**
+  * @brief  显示光标
+  */
+void APP_Gobang_DispCursor(void)
+{
+    GE_Draw_Circle(x_start + cursor_y * interval, y_start + cursor_x * interval, CHESS_RADIUS, RED);
+}
+
+/**
+  * @brief  检查某个方向上的连子数
+  * @param  check_type: 检查方向
+  * @retval 连子数
+  */
+int APP_Gobang_CheckNum(int check_type)
+{
+    int temp_x = cursor_x, temp_y = cursor_y;
+    int num = 0;
+
+    while (temp_x >= 0 && temp_x < WIDTH && temp_y >= 0 && temp_y < WIDTH && map[temp_x][temp_y] == chess_kind)
+    {
+        num++;
+
+        switch (check_type)
+        {
+        case CHECK_X:
+            temp_x--;
+            break;
+        case CHECK_Y:
+            temp_y--;
+            break;
+        case CHECK_DIAG_LEFT:
+            temp_x--;
+            temp_y--;
+            break;
+        case CHECK_DIAG_RIGHT:
+            temp_x--;
+            temp_y++;
+        }
+    }
+
+    switch (check_type)
+    {
+    case CHECK_X:
+        temp_x = cursor_x + 1;
+        break;
+    case CHECK_Y:
+        temp_y = cursor_y + 1;
+        ;
+        break;
+    case CHECK_DIAG_LEFT:
+        temp_x = cursor_x + 1;
+        temp_y = cursor_y + 1;
+        break;
+    case CHECK_DIAG_RIGHT:
+        temp_x = cursor_x + 1;
+        temp_y = cursor_y - 1;
+    }
+
+    while (temp_x >= 0 && temp_x < WIDTH && temp_y >= 0 && temp_y < WIDTH && map[temp_x][temp_y] == chess_kind)
+    {
+        num++;
+
+        switch (check_type)
+        {
+        case CHECK_X:
+            temp_x++;
+            break;
+        case CHECK_Y:
+            temp_y++;
+            break;
+        case CHECK_DIAG_LEFT:
+            temp_x++;
+            temp_y++;
+            break;
+        case CHECK_DIAG_RIGHT:
+            temp_x++;
+            temp_y--;
+        }
+    }
+
+    return num;
+}
+
+/**
+  * @brief  消息框，任意键按下后退出
+  * @param  head: 标题
+  * @param  content: 内容
+  */
+void APP_Gobang_Msg(uint8_t *head, uint8_t *content)
+{
+    GE_Draw_Fill(60, 75, 200, 90, WHITE);
+    GE_GUI_MsgBox(60, 75, 200, 90, head, content, NULL);
+    KEY_WaitKey(JOY_L);
+}
+
+void APP_Gobang_SendPosition(void)
+{
+    uint8_t position[6];
+    position[0] = START_BYTE;
+    position[1] = '0' + cursor_x / 10;
+    position[2] = '0' + cursor_x % 10;
+    position[3] = '0' + cursor_y / 10;
+    position[4] = '0' + cursor_y % 10;
+    position[5] = END_BYTE;
+
+    HC12_SendBuff(position, 6);
+}
+
+void APP_Gobang_RevPosition(void)
+{
+    uint8_t byte;
+    uint8_t position[5];
+    while (1)
+    {
+        if (HC12_Receive(&byte) == 1)
+        {
+            if (byte == START_BYTE)
+            {
+                HC12_ReceiveBuffUntil(position, END_BYTE, 500);
+                cursor_x = (position[0] - '0') * 10 + position[1] - '0';
+                cursor_y = (position[2] - '0') * 10 + position[3] - '0';
+
+                if (map[cursor_x][cursor_y] == NO_CHESS)
+                {
+                    chess_kind = map[cursor_x][cursor_y] = turn == BLACK_TURN ? BLACK_CHESS : WHITE_CHESS;
+                    APP_Gobang_DispGobang();
+                    break;
+                }
+            }
+        }
+    }
+}
+
+uint8_t APP_Gobang_Connect(void)
+{
+    HC12_BindReceiveHandle(APP_Gobang_ConnectRevHandler);
+
+    GE_Draw_Fill(60, 75, 200, 90, WHITE);
+    GE_GUI_MsgBox(60, 75, 200, 90, "当前未联机", "按“OK”以发起联机", NULL);
+
+    while (1)
+    {
+        switch (KEY_GetKey())
+        {
+        case JOY_OK_DOWN:
+        {
+            if (APP_Gobang_InitiateConnet())
+            {
+                uint8_t *head = (my_turn == BLACK_TURN ? "本局我方执黑" : "本局我方执白");
+                GE_Draw_Fill(60, 75, 200, 90, WHITE);
+                GE_GUI_MsgBox(60, 75, 200, 90, head, "按“OK”开始游戏", NULL);
+                Delay_ms(500);
+                KEY_WaitKey(JOY_OK);
+                APP_Gobang_ConfirmBeforeStart();
+                return 1;
+            }
+            else
+            {
+                GE_Draw_Fill(60, 75, 200, 90, WHITE);
+                GE_GUI_MsgBox(60, 75, 200, 90, "当前未联机", "按“OK”以发起联机", NULL);
+            }
+        }
+        break;
+
+        case JOY_L_DOWN:
+        {
+            return 0;
+        }
+        break;
+        }
+
+        if (connetion_msg == REQUEST_MSG)
+        {
+            if (APP_Gobang_ReplyConnect())
+            {
+                uint8_t *head = (my_turn == BLACK_TURN ? "本局我方执黑" : "本局我方执白");
+                GE_Draw_Fill(60, 75, 200, 90, WHITE);
+                GE_GUI_MsgBox(60, 75, 200, 90, head, "按“OK”开始游戏", NULL);
+                Delay_ms(500);
+                KEY_WaitKey(JOY_OK);
+                APP_Gobang_ConfirmBeforeStart();
+                return 1;
+            }
+            else
+            {
+                GE_Draw_Fill(60, 75, 200, 90, WHITE);
+                GE_GUI_MsgBox(60, 75, 200, 90, "当前未联机", "按“OK”以发起联机", NULL);
+            }
+        }
+    }
+}
+
+uint8_t APP_Gobang_InitiateConnet(void)
+{
+    int32_t start_time = SysTick_GetRunTime();
+
+    uint8_t msg[] = {START_BYTE, REQUEST_MSG};
+    HC12_SendBuff(msg, 2);
+    HC12_ClearReceive;
+
+    GE_Draw_Fill(60, 75, 200, 90, WHITE);
+    GE_GUI_MsgBox(60, 75, 200, 90, "当前未联机", "请求已发送，等待对方响应...", NULL);
+
+    while (1)
+    {
+        if (SysTick_CheckRunTime(start_time) > 10000)
+        {
+            GE_Draw_Fill(60, 75, 200, 90, WHITE);
+            GE_GUI_MsgBox(60, 75, 200, 90, "联机失败", "对方无响应,按“OK”退出", NULL);
+            KEY_WaitKey(JOY_OK);
+            connetion_msg = NONE_MSG;
+            return 0;
+        }
+
+        if (connetion_msg == AGREE_MSG)
+        {
+            GE_Draw_Fill(60, 75, 200, 90, WHITE);
+            GE_GUI_MsgBox(60, 75, 200, 90, "联机成功", "按“OK”进入游戏", NULL);
+            KEY_WaitKey(JOY_OK);
+            return 1;
+        }
+
+        else if (connetion_msg == REFUSE_MSG)
+        {
+            GE_Draw_Fill(60, 75, 200, 90, WHITE);
+            GE_GUI_MsgBox(60, 75, 200, 90, "联机失败", "对方拒绝联机,按“OK”退出", NULL);
+            KEY_WaitKey(JOY_OK);
+            connetion_msg = NONE_MSG;
+            return 0;
+        }
+    }
+}
+
+uint8_t APP_Gobang_ReplyConnect(void)
+{
+    uint8_t content[2][GE_GUI_MENUBOX_CONTENT_LEN] = {"是", "否"};
+    GE_Draw_Fill(60, 75, 200, 90, WHITE);
+
+    switch (GE_GUI_MenuBox(60, 75, 200, 90, "对方请求联机，是否接受？", 2, content, NULL))
+    {
+    case 0:
+        connetion_msg = NONE_MSG;
+        return 0;
+        break;
+
+    case 1:
+    {
+        uint8_t msg[] = {START_BYTE, AGREE_MSG};
+        HC12_SendBuff(msg, 2);
+        APP_Gobang_DecideMyTurn();
+
+        GE_Draw_Fill(60, 75, 200, 90, WHITE);
+        GE_GUI_MsgBox(60, 75, 200, 90, "联机成功", "按“OK”进入游戏", NULL);
+        KEY_WaitKey(JOY_OK);
+        connetion_msg = NONE_MSG;
+        return 1;
+    }
+    break;
+
+    case 2:
+    {
+        uint8_t msg[] = {START_BYTE, REFUSE_MSG};
+        HC12_SendBuff(msg, 2);
+        GE_Draw_Fill(60, 75, 200, 90, WHITE);
+        GE_GUI_MsgBox(60, 75, 200, 90, "联机失败", "已拒绝联机,按“OK”退出", NULL);
+        KEY_WaitKey(JOY_OK);
+        connetion_msg = NONE_MSG;
+        return 0;
+    }
+    break;
+    }
+}
+
+void APP_Gobang_DecideMyTurn(void)
+{
+    my_turn = Random() % 2;
+
+    uint8_t msg[] = {START_BYTE, !my_turn};
+    HC12_SendBuff(msg, 2);
+}
+
+void APP_Gobang_ConfirmBeforeStart(void)
+{
+    if (my_turn == BLACK_TURN)
+    {
+        GE_Draw_Fill(60, 75, 200, 90, WHITE);
+        GE_GUI_MsgBox(60, 75, 200, 90, "游戏即将开始", "正在确认白色方设备状态...", NULL);
+        while (connetion_msg != CONFIRM_MSG)
+        {
+            Delay_ms(100);
+        }
+        GE_Draw_Fill(60, 75, 200, 90, WHITE);
+        GE_GUI_MsgBox(60, 75, 200, 90, "准备就绪", "按“OK”开始游戏", NULL);
+        Delay_ms(500);
+        KEY_WaitKey(JOY_OK);
+    }
+    else
+    {
+        uint8_t msg[] = {START_BYTE, CONFIRM_MSG};
+        HC12_SendBuff(msg, 2);
+    }
+}
+
+void APP_Gobang_ConnectRevHandler(uint8_t byte)
+{
+    static uint8_t is_receiving = FALSE;
+
+    if (is_receiving == FALSE && byte == START_BYTE)
+    {
+        is_receiving = TRUE;
+        return;
+    }
+
+    if (is_receiving == TRUE)
+    {
+        if (byte == REQUEST_MSG || byte == AGREE_MSG || byte == REFUSE_MSG || byte == CONFIRM_MSG)
+        {
+            connetion_msg = byte;
+            is_receiving = FALSE;
+        }
+        else if (byte == BLACK_TURN || byte == WHITE_TURN)
+        {
+            my_turn = byte;
+            is_receiving = FALSE;
+        }
+    }
+}

User/APP_Gobang/APP_Gobang.h

@@ -0,0 +1,8 @@
+//五子棋应用
+
+#ifndef __APP_GOBANG
+#define __APP_GOBANG
+
+void APP_Gobang_Launcher(void);
+
+#endif

User/APP_Plane/APP_Plane.c

@@ -0,0 +1,732 @@
+//飞机大战游戏
+
+#include "stdlib.h"
+
+#include "sys.h"
+#include "systick.h"
+
+#include "key.h"
+#include "led.h"
+#include "lcd.h"
+
+#include "GameEngine.h"
+
+#include "fxlib.h"
+
+#include "APP_Plane_Bitmap.h"
+
+#include "APP_Plane.h"
+
+/**************************************** 私有定义 ****************************************/
+
+#define SCREEN_WIDTH 128
+#define SCREEN_HEIGHT 64
+
+#define STATUS_BAR_WIDTH 8
+
+#define SMALL_PLANE_MAX 32
+#define MEDIUM_PLANE_MAX 16
+#define LARGE_PLANE_MAX 2
+
+#define BULLET_MAX 16
+
+#define PLANE_TYPE_SMALL 0
+#define PLANE_TYPE_MEDIUM 1
+#define PLANE_TYPE_LARGE 2
+
+#define PLANE_STATUS_NONEXISTENT (-14)
+#define PLANE_STATUS_EXPLODING_2 (-13)
+#define PLANE_STATUS_EXPLODING_1 (-6)
+#define PLANE_STATUS_ALIVE 1
+
+#define SP_HEALTH_VAL 2
+#define MP_HEALTH_VAL 6
+#define LP_HEALTH_VAL 10
+
+#define BULLET_STATUS_NONEXISTENT 0
+#define BULLET_STATUS_FLYING 1
+
+#define DIRECTION_UP 0
+#define DIRECTION_DOWN 1
+#define DIRECTION_LEFT 2
+#define DIRECTION_RIGHT 3
+
+#define SP_GRAPHIC_WIDTH 7
+#define SP_GRAPHIC_HEIGHT 7
+
+#define MP_GRAPHIC_WIDTH 12
+#define MP_GRAPHIC_HEIGHT 9
+
+#define LP_GRAPHIC_WIDTH 33
+#define LP_GRAPHIC_HEIGHT 22
+
+#define RP_GRAPHIC_WIDTH 13
+#define RP_GRAPHIC_HEIGHT 13
+
+#define BULLET_GRAPHIC_WIDTH 5
+#define BULLET_GRAPHIC_HEIGHT 3
+
+#define SP_COLLISION_POS_X 1
+#define SP_COLLISION_POS_Y 1
+#define SP_COLLISION_WIDTH 5
+#define SP_COLLISION_HEIGHT 5
+
+#define MP_COLLISION_POS_X 1
+#define MP_COLLISION_POS_Y 1
+#define MP_COLLISION_WIDTH 10
+#define MP_COLLISION_HEIGHT 7
+
+#define LP_COLLISION_POS_X 2
+#define LP_COLLISION_POS_Y 2
+#define LP_COLLISION_WIDTH 27
+#define LP_COLLISION_HEIGHT 18
+
+#define RP_COLLISION_POS_X 2
+#define RP_COLLISION_POS_Y 2
+#define RP_COLLISION_WIDTH 8
+#define RP_COLLISION_HEIGHT 9
+
+#define BULLET_COLLISION_POS_X (-1)
+#define BULLET_COLLISION_POS_Y 0
+#define BULLET_COLLISION_WIDTH 5
+#define BULLET_COLLISION_HEIGHT 5
+
+#define COLLISION_ROLE_PLANE 0
+#define NO_COLLISION_ROLE_PLANE 1
+
+#define Random() rand()
+
+typedef struct
+{
+    int x;
+    int y;
+    int status;
+} Object;
+
+/*****************************************************************************************/
+
+/**************************************** 全局变量 ****************************************/
+
+Object Small_Plane[SMALL_PLANE_MAX];
+Object Medium_Plane[MEDIUM_PLANE_MAX];
+Object Large_Plane[LARGE_PLANE_MAX];
+Object Bullet[BULLET_MAX];
+Object Role_Plane;
+
+int SP_Generate_Interval_Max, SP_Generate_Interval_Min, MP_Generate_Interval_Max, MP_Generate_Interval_Min, LP_Generate_Interval_Max, LP_Generate_Interval_Min, Bullet_Generate_Interval;
+int SP_Move_Interval, MP_Move_Interval, LP_Move_Interval, Bullet_Move_Interval;
+int Get_Key_Interval, Turbo_Interval;
+int SP_Destroyed, MP_Destroyed, LP_Destroyed, Score;
+
+/*****************************************************************************************/
+
+/**************************************** 私有函数 ****************************************/
+
+void Menu(void);
+void Game(void);
+void Move_Plane(int type);
+void New_Plane(int type);
+void Move_Role_Plane(int direction);
+void Move_Bullet(void);
+void New_Bullet(void);
+void Init(void);
+void Draw_All(void);
+void Game_Over(void);
+int Collision_Detection(void);
+
+/*****************************************************************************************/
+
+/**
+  * @brief  启动飞机大战游戏
+  */
+void APP_Plane_Launcher(void)
+{
+    Game();
+}
+
+void Game()
+{
+    srand(SysTick->VAL);
+
+    int sp_generate_interval, mp_generate_interval, lp_generate_interval;
+    int sp_move_timer = 0, mp_move_timer = 0, lp_move_timer = 0, bullet_move_timer = 0;
+    int sp_generate_timer = 0, mp_generate_timer = 0, lp_generate_timer = 0, bullet_generate_timer = 0;
+    int get_key_timer = 0, turbo_timer = 0;
+
+    Init();
+
+    sp_generate_interval = Random() % (SP_Generate_Interval_Max - SP_Generate_Interval_Min) + SP_Generate_Interval_Min;
+    mp_generate_interval = Random() % (MP_Generate_Interval_Max - MP_Generate_Interval_Min) + MP_Generate_Interval_Min;
+    lp_generate_interval = Random() % (LP_Generate_Interval_Max - LP_Generate_Interval_Min) + LP_Generate_Interval_Min;
+
+    while (1)
+    {
+        sp_move_timer++;
+        mp_move_timer++;
+        lp_move_timer++;
+        bullet_move_timer++;
+
+        sp_generate_timer++;
+        mp_generate_timer++;
+        lp_generate_timer++;
+        bullet_generate_timer++;
+
+        get_key_timer++;
+        turbo_timer++;
+
+        if (sp_move_timer >= SP_Move_Interval)
+        {
+            Move_Plane(PLANE_TYPE_SMALL);
+            sp_move_timer = 0;
+        }
+
+        if (sp_generate_timer >= sp_generate_interval)
+        {
+            New_Plane(PLANE_TYPE_SMALL);
+            sp_generate_timer = 0;
+            sp_generate_interval = Random() % (SP_Generate_Interval_Max - SP_Generate_Interval_Min) + SP_Generate_Interval_Min;
+        }
+
+        if (mp_move_timer >= MP_Move_Interval)
+        {
+            Move_Plane(PLANE_TYPE_MEDIUM);
+            mp_move_timer = 0;
+        }
+
+        if (mp_generate_timer >= mp_generate_interval)
+        {
+            New_Plane(PLANE_TYPE_MEDIUM);
+            mp_generate_timer = 0;
+            mp_generate_interval = Random() % (MP_Generate_Interval_Max - MP_Generate_Interval_Min) + MP_Generate_Interval_Min;
+        }
+
+        if (lp_move_timer >= LP_Move_Interval)
+        {
+            Move_Plane(PLANE_TYPE_LARGE);
+            lp_move_timer = 0;
+        }
+
+        if (lp_generate_timer >= lp_generate_interval)
+        {
+            New_Plane(PLANE_TYPE_LARGE);
+            lp_generate_timer = 0;
+            lp_generate_interval = Random() % (LP_Generate_Interval_Max - LP_Generate_Interval_Min) + LP_Generate_Interval_Min;
+        }
+
+        if (bullet_move_timer >= Bullet_Move_Interval)
+        {
+            Move_Bullet();
+            bullet_move_timer = 0;
+        }
+
+        if (bullet_generate_timer >= Bullet_Generate_Interval)
+        {
+            New_Bullet();
+            bullet_generate_timer = 0;
+            Score++;
+        }
+
+        if (get_key_timer >= Get_Key_Interval)
+        {
+            get_key_timer = 0;
+            switch (KEY_GetKey())
+            {
+            case JOY_U_DOWN:
+                Move_Role_Plane(DIRECTION_UP);
+                break;
+            case JOY_D_DOWN:
+                Move_Role_Plane(DIRECTION_DOWN);
+                break;
+            case JOY_L_DOWN:
+                Move_Role_Plane(DIRECTION_LEFT);
+                break;
+            case JOY_R_DOWN:
+                Move_Role_Plane(DIRECTION_RIGHT);
+            }
+
+            // if (key_down(K_EXIT))
+            // {
+            //     Game_Over();
+            //     return;
+            // }
+        }
+
+        if (turbo_timer >= Turbo_Interval)
+        {
+            if (SP_Generate_Interval_Max > 100)
+                SP_Generate_Interval_Max -= 50;
+            if (SP_Generate_Interval_Min > 50)
+                SP_Generate_Interval_Min -= 25;
+            if (SP_Move_Interval > 10)
+                SP_Move_Interval--;
+
+            if (MP_Generate_Interval_Max > 200)
+                MP_Generate_Interval_Max -= 100;
+            if (MP_Generate_Interval_Min > 100)
+                MP_Generate_Interval_Min -= 50;
+            if (MP_Move_Interval > 15)
+                MP_Move_Interval -= 2;
+
+            if (LP_Generate_Interval_Max > 2000)
+                LP_Generate_Interval_Max -= 2000;
+            if (LP_Generate_Interval_Min > 1000)
+                LP_Generate_Interval_Min -= 1000;
+            if (LP_Move_Interval > 30)
+                LP_Move_Interval -= 3;
+
+            if (Turbo_Interval > 1000)
+                Turbo_Interval -= 1000;
+            turbo_timer = 0;
+        }
+
+        if (Collision_Dection() == COLLISION_ROLE_PLANE)
+        {
+            Game_Over();
+            return;
+        }
+
+        ML_clear_vram();
+        Draw_All();
+        ML_display_vram();
+    }
+}
+
+void Move_Role_Plane(int direction)
+{
+    if (direction == DIRECTION_UP && Role_Plane.y > 0)
+        Role_Plane.y--;
+    if (direction == DIRECTION_DOWN && Role_Plane.y + RP_GRAPHIC_HEIGHT < SCREEN_HEIGHT)
+        Role_Plane.y++;
+    if (direction == DIRECTION_LEFT && Role_Plane.x > 0)
+        Role_Plane.x--;
+    if (direction == DIRECTION_RIGHT && Role_Plane.x + RP_GRAPHIC_WIDTH < SCREEN_WIDTH - STATUS_BAR_WIDTH)
+        Role_Plane.x++;
+}
+
+void New_Bullet()
+{
+    int i;
+
+    for (i = 0; i < BULLET_MAX; i++)
+    {
+        if (Bullet[i].status == BULLET_STATUS_NONEXISTENT)
+        {
+            Bullet[i].status = BULLET_STATUS_FLYING;
+            Bullet[i].x = Role_Plane.x + RP_GRAPHIC_WIDTH;
+            Bullet[i].y = Role_Plane.y + (RP_GRAPHIC_HEIGHT >> 1) - 1;
+            break;
+        }
+    }
+}
+
+void New_Plane(int type)
+{
+    int i;
+
+    if (type == PLANE_TYPE_SMALL)
+    {
+        for (i = 0; i < SMALL_PLANE_MAX; i++)
+        {
+            if (Small_Plane[i].status == PLANE_STATUS_NONEXISTENT)
+            {
+                Small_Plane[i].status = SP_HEALTH_VAL;
+                Small_Plane[i].x = SCREEN_WIDTH - STATUS_BAR_WIDTH;
+                Small_Plane[i].y = Random() % (SCREEN_HEIGHT - SP_GRAPHIC_HEIGHT);
+                return;
+            }
+        }
+    }
+
+    if (type == PLANE_TYPE_MEDIUM)
+    {
+        for (i = 0; i < MEDIUM_PLANE_MAX; i++)
+        {
+            if (Medium_Plane[i].status == PLANE_STATUS_NONEXISTENT)
+            {
+                Medium_Plane[i].status = MP_HEALTH_VAL;
+                Medium_Plane[i].x = SCREEN_WIDTH - STATUS_BAR_WIDTH;
+                Medium_Plane[i].y = Random() % (SCREEN_HEIGHT - MP_GRAPHIC_HEIGHT);
+                return;
+            }
+        }
+    }
+
+    if (type == PLANE_TYPE_LARGE)
+    {
+        for (i = 0; i < LARGE_PLANE_MAX; i++)
+        {
+            if (Large_Plane[i].status == PLANE_STATUS_NONEXISTENT)
+            {
+                Large_Plane[i].status = LP_HEALTH_VAL;
+                Large_Plane[i].x = SCREEN_WIDTH - STATUS_BAR_WIDTH;
+                Large_Plane[i].y = Random() % (SCREEN_HEIGHT - LP_GRAPHIC_HEIGHT);
+                return;
+            }
+        }
+    }
+}
+
+void Move_Plane(int type)
+{
+    int i;
+
+    if (type == PLANE_TYPE_SMALL)
+    {
+        for (i = 0; i < SMALL_PLANE_MAX; i++)
+        {
+            if (Small_Plane[i].status >= PLANE_STATUS_ALIVE)
+            {
+                Small_Plane[i].x--;
+                if (Small_Plane[i].x < -SP_GRAPHIC_WIDTH)
+                    Small_Plane[i].status = PLANE_STATUS_NONEXISTENT;
+            }
+            else if (Small_Plane[i].status >= PLANE_STATUS_EXPLODING_1)
+            {
+                Small_Plane[i].status--;
+            }
+            else if (Small_Plane[i].status >= PLANE_STATUS_EXPLODING_2)
+            {
+                Small_Plane[i].status--;
+            }
+        }
+    }
+
+    if (type == PLANE_TYPE_MEDIUM)
+    {
+        for (i = 0; i < MEDIUM_PLANE_MAX; i++)
+        {
+            if (Medium_Plane[i].status >= PLANE_STATUS_ALIVE)
+            {
+                Medium_Plane[i].x--;
+                if (Medium_Plane[i].x < -MP_GRAPHIC_WIDTH)
+                    Medium_Plane[i].status = PLANE_STATUS_NONEXISTENT;
+            }
+            else if (Medium_Plane[i].status >= PLANE_STATUS_EXPLODING_1)
+            {
+                Medium_Plane[i].status--;
+            }
+            else if (Medium_Plane[i].status >= PLANE_STATUS_EXPLODING_2)
+            {
+                Medium_Plane[i].status--;
+            }
+        }
+    }
+
+    if (type == PLANE_TYPE_LARGE)
+    {
+        for (i = 0; i < LARGE_PLANE_MAX; i++)
+        {
+            if (Large_Plane[i].status >= PLANE_STATUS_ALIVE)
+            {
+                Large_Plane[i].x--;
+                if (Large_Plane[i].x < -LP_GRAPHIC_WIDTH)
+                    Large_Plane[i].status = PLANE_STATUS_NONEXISTENT;
+            }
+            else if (Large_Plane[i].status >= PLANE_STATUS_EXPLODING_1)
+            {
+                Large_Plane[i].status--;
+            }
+            else if (Large_Plane[i].status >= PLANE_STATUS_EXPLODING_2)
+            {
+                Large_Plane[i].status--;
+            }
+        }
+    }
+}
+
+void Move_Bullet()
+{
+    int i;
+
+    for (i = 0; i < BULLET_MAX; i++)
+    {
+        if (Bullet[i].status == BULLET_STATUS_FLYING)
+        {
+            Bullet[i].x++;
+            if (Bullet[i].x > SCREEN_WIDTH - STATUS_BAR_WIDTH)
+                Bullet[i].status = BULLET_STATUS_NONEXISTENT;
+        }
+    }
+}
+
+void Init()
+{
+    int i;
+
+    for (i = 0; i < SMALL_PLANE_MAX; i++)
+    {
+        Small_Plane[i].status = PLANE_STATUS_NONEXISTENT;
+    }
+
+    for (i = 0; i < MEDIUM_PLANE_MAX; i++)
+    {
+        Medium_Plane[i].status = PLANE_STATUS_NONEXISTENT;
+    }
+
+    for (i = 0; i < LARGE_PLANE_MAX; i++)
+    {
+        Large_Plane[i].status = PLANE_STATUS_NONEXISTENT;
+    }
+
+    for (i = 0; i < BULLET_MAX; i++)
+    {
+        Bullet[i].status = BULLET_STATUS_NONEXISTENT;
+    }
+
+    Role_Plane.x = 0;
+    Role_Plane.y = (SCREEN_HEIGHT - RP_GRAPHIC_HEIGHT) / 2;
+    Role_Plane.status = PLANE_STATUS_ALIVE;
+
+    SP_Generate_Interval_Max = 300; //600
+    SP_Generate_Interval_Min = 150; //300
+    SP_Move_Interval = 3;           //20
+
+    MP_Generate_Interval_Max = 600; //1200
+    MP_Generate_Interval_Min = 300; //600
+    MP_Move_Interval = 5;           //30
+
+    LP_Generate_Interval_Max = 6000; //12000
+    LP_Generate_Interval_Min = 3000; //6000
+    LP_Move_Interval = 10;           //60
+
+    Bullet_Move_Interval = 1;      //3
+    Bullet_Generate_Interval = 30; //100
+
+    Get_Key_Interval = 1;
+    Turbo_Interval = 10000;
+
+    SP_Destroyed = 0;
+    MP_Destroyed = 0;
+    LP_Destroyed = 0;
+    Score = 0;
+}
+
+void Draw_All()
+{
+    int i, j, digit, remain;
+    unsigned char tmp;
+
+    for (i = 0; i < LARGE_PLANE_MAX; i++)
+    {
+        if (Large_Plane[i].status >= PLANE_STATUS_ALIVE)
+        {
+            ML_bmp_or_cl(Bitmap_LP_CoverArea, Large_Plane[i].x, Large_Plane[i].y, LP_GRAPHIC_WIDTH, LP_GRAPHIC_HEIGHT);
+            ML_bmp_xor_cl(Bitmap_LP_ClearArea, Large_Plane[i].x, Large_Plane[i].y, LP_GRAPHIC_WIDTH, LP_GRAPHIC_HEIGHT);
+        }
+        else if (Large_Plane[i].status >= PLANE_STATUS_EXPLODING_1)
+        {
+            ML_bmp_or_cl(Bitmap_LP_CoverArea, Large_Plane[i].x, Large_Plane[i].y, LP_GRAPHIC_WIDTH, LP_GRAPHIC_HEIGHT);
+            ML_bmp_xor_cl(Bitmap_LP_ClearArea, Large_Plane[i].x, Large_Plane[i].y, LP_GRAPHIC_WIDTH, LP_GRAPHIC_HEIGHT);
+            ML_bmp_or_cl(Bitmap_Explosion_Large_1, Large_Plane[i].x, Large_Plane[i].y, 16, 16);
+            ML_bmp_or_cl(Bitmap_Explosion_Large_1, Large_Plane[i].x + LP_GRAPHIC_WIDTH - 16, Large_Plane[i].y + LP_GRAPHIC_HEIGHT - 16, 16, 16);
+        }
+        else if (Large_Plane[i].status >= PLANE_STATUS_EXPLODING_2)
+        {
+            ML_bmp_or_cl(Bitmap_LP_CoverArea, Large_Plane[i].x, Large_Plane[i].y, LP_GRAPHIC_WIDTH, LP_GRAPHIC_HEIGHT);
+            ML_bmp_xor_cl(Bitmap_LP_ClearArea, Large_Plane[i].x, Large_Plane[i].y, LP_GRAPHIC_WIDTH, LP_GRAPHIC_HEIGHT);
+            ML_bmp_or_cl(Bitmap_Explosion_Large_2, Large_Plane[i].x, Large_Plane[i].y, 16, 16);
+            ML_bmp_or_cl(Bitmap_Explosion_Large_2, Large_Plane[i].x + LP_GRAPHIC_WIDTH - 16, Large_Plane[i].y + LP_GRAPHIC_HEIGHT - 16, 16, 16);
+        }
+    }
+
+    for (i = 0; i < MEDIUM_PLANE_MAX; i++)
+    {
+        if (Medium_Plane[i].status >= PLANE_STATUS_ALIVE)
+        {
+            ML_bmp_or_cl(Bitmap_MP_CoverArea, Medium_Plane[i].x, Medium_Plane[i].y, MP_GRAPHIC_WIDTH, MP_GRAPHIC_HEIGHT);
+            ML_bmp_xor_cl(Bitmap_MP_ClearArea, Medium_Plane[i].x, Medium_Plane[i].y, MP_GRAPHIC_WIDTH, MP_GRAPHIC_HEIGHT);
+        }
+        else if (Medium_Plane[i].status >= PLANE_STATUS_EXPLODING_1)
+        {
+            ML_bmp_or_cl(Bitmap_MP_CoverArea, Medium_Plane[i].x, Medium_Plane[i].y, MP_GRAPHIC_WIDTH, MP_GRAPHIC_HEIGHT);
+            ML_bmp_xor_cl(Bitmap_MP_ClearArea, Medium_Plane[i].x, Medium_Plane[i].y, MP_GRAPHIC_WIDTH, MP_GRAPHIC_HEIGHT);
+            ML_bmp_or_cl(Bitmap_Explosion_1, Medium_Plane[i].x + 2, Medium_Plane[i].y, 8, 8);
+        }
+        else if (Medium_Plane[i].status >= PLANE_STATUS_EXPLODING_2)
+        {
+            ML_bmp_or_cl(Bitmap_MP_CoverArea, Medium_Plane[i].x, Medium_Plane[i].y, MP_GRAPHIC_WIDTH, MP_GRAPHIC_HEIGHT);
+            ML_bmp_xor_cl(Bitmap_MP_ClearArea, Medium_Plane[i].x, Medium_Plane[i].y, MP_GRAPHIC_WIDTH, MP_GRAPHIC_HEIGHT);
+            ML_bmp_or_cl(Bitmap_Explosion_2, Medium_Plane[i].x + 2, Medium_Plane[i].y, 8, 8);
+        }
+    }
+
+    for (i = 0; i < SMALL_PLANE_MAX; i++)
+    {
+        if (Small_Plane[i].status >= PLANE_STATUS_ALIVE)
+        {
+            ML_bmp_or_cl(Bitmap_SP_CoverArea, Small_Plane[i].x, Small_Plane[i].y, SP_GRAPHIC_WIDTH, SP_GRAPHIC_HEIGHT);
+            ML_bmp_xor_cl(Bitmap_SP_ClearArea, Small_Plane[i].x, Small_Plane[i].y, SP_GRAPHIC_WIDTH, SP_GRAPHIC_HEIGHT);
+        }
+        else if (Small_Plane[i].status >= PLANE_STATUS_EXPLODING_1)
+        {
+            ML_bmp_or_cl(Bitmap_SP_CoverArea, Small_Plane[i].x, Small_Plane[i].y, SP_GRAPHIC_WIDTH, SP_GRAPHIC_HEIGHT);
+            ML_bmp_xor_cl(Bitmap_SP_ClearArea, Small_Plane[i].x, Small_Plane[i].y, SP_GRAPHIC_WIDTH, SP_GRAPHIC_HEIGHT);
+            ML_bmp_or_cl(Bitmap_Explosion_1, Small_Plane[i].x, Small_Plane[i].y - 1, 8, 8);
+        }
+        else if (Small_Plane[i].status >= PLANE_STATUS_EXPLODING_2)
+        {
+            ML_bmp_or_cl(Bitmap_SP_CoverArea, Small_Plane[i].x, Small_Plane[i].y, SP_GRAPHIC_WIDTH, SP_GRAPHIC_HEIGHT);
+            ML_bmp_xor_cl(Bitmap_SP_ClearArea, Small_Plane[i].x, Small_Plane[i].y, SP_GRAPHIC_WIDTH, SP_GRAPHIC_HEIGHT);
+            ML_bmp_or_cl(Bitmap_Explosion_2, Small_Plane[i].x, Small_Plane[i].y - 1, 8, 8);
+        }
+    }
+
+    for (i = 0; i < BULLET_MAX; i++)
+    {
+        if (Bullet[i].status == BULLET_STATUS_FLYING)
+            ML_bmp_or_cl(Bitmap_Bullet, Bullet[i].x, Bullet[i].y, BULLET_GRAPHIC_WIDTH, BULLET_GRAPHIC_HEIGHT);
+    }
+
+    if (Role_Plane.status == PLANE_STATUS_ALIVE)
+    {
+        ML_bmp_or_cl(Bitmap_RP_CoverArea, Role_Plane.x, Role_Plane.y, RP_GRAPHIC_WIDTH, RP_GRAPHIC_HEIGHT);
+        ML_bmp_xor_cl(Bitmap_RP_ClearArea, Role_Plane.x, Role_Plane.y, RP_GRAPHIC_WIDTH, RP_GRAPHIC_HEIGHT);
+    }
+
+    j = 10000000;
+    remain = Score;
+    for (i = 0; i < 8; i++)
+    {
+        digit = remain / j;
+        ML_bmp_or_cl(Bitmap_Numbers[digit], SCREEN_WIDTH - STATUS_BAR_WIDTH, i * 4, 7, 3);
+        remain -= digit * j;
+        j /= 10;
+    }
+
+    GE_Draw_Rectangle(32, 56, 257, 129, BLACK);
+}
+
+int Collision_Dection()
+{
+    int i, j;
+    int x1, y1, w1, h1, x2, y2, w2, h2, x3, y3, w3, h3;
+
+    x1 = Role_Plane.x + RP_COLLISION_POS_X;
+    y1 = Role_Plane.y + RP_COLLISION_POS_Y;
+    w1 = RP_COLLISION_WIDTH;
+    h1 = RP_COLLISION_HEIGHT;
+
+    w2 = SP_COLLISION_WIDTH;
+    h2 = SP_COLLISION_HEIGHT;
+    w3 = BULLET_COLLISION_WIDTH;
+    h3 = BULLET_COLLISION_HEIGHT;
+    for (i = 0; i < SMALL_PLANE_MAX; i++)
+    {
+        if (Small_Plane[i].status >= PLANE_STATUS_ALIVE)
+        {
+            x2 = Small_Plane[i].x + SP_COLLISION_POS_X;
+            y2 = Small_Plane[i].y + SP_COLLISION_POS_Y;
+            if (x1 - x2 < w2 && x2 - x1 < w1 && y1 - y2 < h2 && y2 - y1 < h1)
+                return COLLISION_ROLE_PLANE;
+            for (j = 0; j < BULLET_MAX; j++)
+            {
+                if (Bullet[j].status == BULLET_STATUS_FLYING)
+                {
+                    x3 = Bullet[j].x + BULLET_COLLISION_POS_X;
+                    y3 = Bullet[j].y + BULLET_COLLISION_POS_Y;
+                    if (x3 - x2 < w2 && x2 - x3 < w3 && y3 - y2 < h2 && y2 - y3 < h3)
+                    {
+                        Small_Plane[i].status--;
+                        if (Small_Plane[i].status == PLANE_STATUS_ALIVE - 1)
+                        {
+                            SP_Destroyed++;
+                            Score += 1000;
+                        }
+                        Bullet[j].status = BULLET_STATUS_NONEXISTENT;
+                    }
+                }
+            }
+        }
+    }
+
+    w2 = MP_COLLISION_WIDTH;
+    h2 = MP_COLLISION_HEIGHT;
+    w3 = BULLET_COLLISION_WIDTH;
+    h3 = BULLET_COLLISION_HEIGHT;
+    for (i = 0; i < MEDIUM_PLANE_MAX; i++)
+    {
+        if (Medium_Plane[i].status >= PLANE_STATUS_ALIVE)
+        {
+            x2 = Medium_Plane[i].x + MP_COLLISION_POS_X;
+            y2 = Medium_Plane[i].y + MP_COLLISION_POS_Y;
+            if (x1 - x2 < w2 && x2 - x1 < w1 && y1 - y2 < h2 && y2 - y1 < h1)
+                return COLLISION_ROLE_PLANE;
+            for (j = 0; j < BULLET_MAX; j++)
+            {
+                if (Bullet[j].status == BULLET_STATUS_FLYING)
+                {
+                    x3 = Bullet[j].x + BULLET_COLLISION_POS_X;
+                    y3 = Bullet[j].y + BULLET_COLLISION_POS_Y;
+                    if (x3 - x2 < w2 && x2 - x3 < w3 && y3 - y2 < h2 && y2 - y3 < h3)
+                    {
+                        Medium_Plane[i].status--;
+                        if (Medium_Plane[i].status == PLANE_STATUS_ALIVE - 1)
+                        {
+                            MP_Destroyed++;
+                            Score += 6000;
+                        }
+                        Bullet[j].status = BULLET_STATUS_NONEXISTENT;
+                    }
+                }
+            }
+        }
+    }
+
+    w2 = LP_COLLISION_WIDTH;
+    h2 = LP_COLLISION_HEIGHT;
+    w3 = BULLET_COLLISION_WIDTH;
+    h3 = BULLET_COLLISION_HEIGHT;
+    for (i = 0; i < LARGE_PLANE_MAX; i++)
+    {
+        if (Large_Plane[i].status >= PLANE_STATUS_ALIVE)
+        {
+            x2 = Large_Plane[i].x + LP_COLLISION_POS_X;
+            y2 = Large_Plane[i].y + LP_COLLISION_POS_Y;
+            if (x1 - x2 < w2 && x2 - x1 < w1 && y1 - y2 < h2 && y2 - y1 < h1)
+                return COLLISION_ROLE_PLANE;
+            for (j = 0; j < BULLET_MAX; j++)
+            {
+                if (Bullet[j].status == BULLET_STATUS_FLYING)
+                {
+                    x3 = Bullet[j].x + BULLET_COLLISION_POS_X;
+                    y3 = Bullet[j].y + BULLET_COLLISION_POS_Y;
+                    if (x3 - x2 < w2 && x2 - x3 < w3 && y3 - y2 < h2 && y2 - y3 < h3)
+                    {
+                        Large_Plane[i].status--;
+                        if (Large_Plane[i].status == PLANE_STATUS_ALIVE - 1)
+                        {
+                            LP_Destroyed++;
+                            Score += 10000;
+                        }
+                        Bullet[j].status = BULLET_STATUS_NONEXISTENT;
+                    }
+                }
+            }
+        }
+    }
+
+    return NO_COLLISION_ROLE_PLANE;
+}
+
+void Game_Over()
+{
+    int i;
+
+    for (i = 0; i < BULLET_MAX; i++)
+    {
+        Bullet[i].status = BULLET_STATUS_NONEXISTENT;
+    }
+
+    ML_clear_vram();
+    Draw_All();
+    ML_display_vram();
+    Sleep(750);
+    ML_bmp_or_cl(Bitmap_Explosion_Large_1, Role_Plane.x - 2, Role_Plane.y - 2, 16, 16);
+    ML_display_vram();
+    Sleep(750);
+    ML_clear_vram();
+    Draw_All();
+    ML_bmp_or_cl(Bitmap_Explosion_Large_2, Role_Plane.x - 2, Role_Plane.y - 2, 16, 16);
+    ML_display_vram();
+    Sleep(1500);
+}

User/APP_Plane/APP_Plane.h

@@ -0,0 +1,8 @@
+//飞机大战游戏
+
+#ifndef __APP_PLANE
+#define __APP_PLANE
+
+void APP_Plane_Launcher(void);
+
+#endif

User/APP_Plane/APP_Plane_Bitmap.h

@@ -0,0 +1,162 @@
+#ifndef __APP_PLANE_BITMAP_H
+#define __APP_PLANE_BITMAP_H
+
+const unsigned char Bitmap_SP_CoverArea[] = {
+    0x18, 0x38, 0x7a, 0xfe, 0x7a, 0x38, 0x18};
+
+const unsigned char Bitmap_SP_ClearArea[] = {
+    0x00, 0x10, 0x30, 0x40, 0x30, 0x10, 0x00};
+
+const unsigned char Bitmap_MP_CoverArea[] = {
+    0x0f, 0x00, 0x02, 0x00, 0x1f, 0x00, 0x7f, 0xa0, 0xff, 0xf0, 0x7f, 0xa0, 0x1f, 0x00, 0x02, 0x00,
+    0x0f, 0x00};
+
+const unsigned char Bitmap_MP_ClearArea[] = {
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x56, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00};
+
+const unsigned char Bitmap_LP_CoverArea[] = {
+    0x01, 0x80, 0x00, 0x00, 0x00, 0x03, 0xc0, 0x08, 0x00, 0x00, 0x07, 0xe0, 0x1f, 0xff, 0x80, 0x0f,
+    0xff, 0xc9, 0xe0, 0x00, 0x1f, 0xff, 0xe7, 0xc0, 0x00, 0x3f, 0xff, 0xcf, 0x80, 0x00, 0x7f, 0xff,
+    0xff, 0x00, 0x00, 0x7f, 0xff, 0xff, 0x00, 0x00, 0x7f, 0xff, 0xff, 0x00, 0x00, 0xff, 0xff, 0xff,
+    0x80, 0x00, 0x7f, 0xff, 0xff, 0xc0, 0x00, 0x3f, 0xff, 0xff, 0xc0, 0x00, 0x7f, 0xff, 0xff, 0x80,
+    0x00, 0x7f, 0xff, 0xff, 0x00, 0x00, 0x7f, 0xff, 0xff, 0x00, 0x00, 0x7f, 0xff, 0xff, 0x00, 0x00,
+    0x3f, 0xff, 0xcf, 0x80, 0x00, 0x1f, 0xff, 0xe7, 0xc0, 0x00, 0x0f, 0xff, 0xc9, 0xe0, 0x00, 0x07,
+    0xe0, 0x1f, 0xff, 0x80, 0x03, 0xc0, 0x08, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0x00};
+
+const unsigned char Bitmap_LP_ClearArea[] = {
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0x00, 0x02, 0x40, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0xc0, 0x00, 0x0f, 0xcf, 0xc1, 0x80, 0x00, 0x1c, 0x37, 0x87, 0x00, 0x00, 0x33, 0x00,
+    0x0e, 0x00, 0x00, 0x26, 0xff, 0xfe, 0x00, 0x00, 0x1d, 0x00, 0x06, 0x00, 0x00, 0x6b, 0x3f, 0x98,
+    0x00, 0x00, 0x2a, 0xd2, 0xb4, 0x80, 0x00, 0x0a, 0xd2, 0xb4, 0x80, 0x00, 0x2b, 0x3f, 0x98, 0x00,
+    0x00, 0x1d, 0x00, 0x06, 0x00, 0x00, 0x26, 0xff, 0xfe, 0x00, 0x00, 0x32, 0x00, 0x0e, 0x00, 0x00,
+    0x1c, 0x37, 0x87, 0x00, 0x00, 0x0f, 0xcf, 0xc1, 0x80, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x02,
+    0x40, 0x00, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+const unsigned char Bitmap_RP_CoverArea[] = {
+    0x18, 0x00, 0x3c, 0x00, 0xff, 0x80, 0x3f, 0x00, 0x1f, 0x80, 0x3f, 0xf0, 0x3f, 0xf8, 0x3f, 0xf0,
+    0x1f, 0x80, 0x3f, 0x00, 0xff, 0x80, 0x3c, 0x00, 0x18, 0x00};
+
+const unsigned char Bitmap_RP_ClearArea[] = {
+    0x00, 0x00, 0x08, 0x00, 0x2c, 0x00, 0x0e, 0x00, 0x03, 0x00, 0x14, 0x00, 0x11, 0x30, 0x14, 0x00,
+    0x03, 0x00, 0x0e, 0x00, 0x2c, 0x00, 0x08, 0x00, 0x00, 0x00};
+
+const unsigned char Bitmap_Bullet[] = {
+    0x70, 0xf8, 0x70};
+
+const unsigned char Bitmap_Explosion_1[] = {
+    0x00, 0x00, 0x08, 0x10, 0x3a, 0xac, 0x10, 0x00};
+
+const unsigned char Bitmap_Explosion_2[] = {
+    0x01, 0x25, 0x12, 0xb1, 0x74, 0x88, 0x97, 0x4c};
+
+const unsigned char Bitmap_Explosion_Large_1[] = {
+    0x00, 0x00, 0x20, 0x00, 0x08, 0x00, 0x20, 0x00, 0x09, 0x00, 0x0c, 0x20, 0x46, 0x10, 0x10, 0x20,
+    0x10, 0x30, 0x0a, 0x10, 0x05, 0x80, 0x00, 0x00, 0x00, 0x80, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+const unsigned char Bitmap_Explosion_Large_2[] = {
+    0x02,
+    0x00,
+    0x27,
+    0x38,
+    0x07,
+    0x34,
+    0x51,
+    0x61,
+    0x19,
+    0x80,
+    0x27,
+    0xda,
+    0x7d,
+    0xf0,
+    0xb0,
+    0xa9,
+    0x4f,
+    0x30,
+    0x2a,
+    0xa0,
+    0x8f,
+    0x3b,
+    0x03,
+    0x2c,
+    0x1a,
+    0x41,
+    0x29,
+    0xc8,
+    0x44,
+    0x20,
+    0x10,
+    0x00,
+};
+
+const unsigned char Bitmap_Numbers[][3] = {
+    0xfe, 0x82, 0xfe, 0x82, 0xfe, 0x80, 0xf2, 0x92, 0x9e, 0x92, 0x92, 0xfe, 0x1e, 0x10, 0xfe, 0x9e,
+    0x92, 0xf2, 0xfe, 0x92, 0xf2, 0x02, 0x02, 0xfe, 0xfe, 0x92, 0xfe, 0x9e, 0x92, 0xfe};
+
+const unsigned char Bitmap_Menu[] = {
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf8, 0x00, 0x1f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x38, 0x00, 0x1f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xe0, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xfd, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x07, 0x3f, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xfd, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x07, 0x3f, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xfd, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x07, 0x3f, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xe0, 0x3f, 0xff, 0xff, 0xff, 0x1f, 0xff, 0xff, 0x3f, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x07, 0xff, 0x1f, 0xff, 0xff, 0x3f, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xef, 0xbf, 0xff, 0xf7, 0xff, 0x1f, 0xff, 0xff, 0x3f, 0xe0, 0x1f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xe0, 0x3f, 0xff, 0xf7, 0xff, 0x00, 0x00, 0x07, 0x3f, 0xe0, 0x1f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xef, 0xbf, 0xff, 0xf7, 0xff, 0x00, 0x00, 0x07, 0x3f, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x07, 0xff, 0x00, 0x00, 0x07, 0x3f, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xe0, 0x3f, 0xff, 0xff, 0xff, 0x1f, 0xff, 0xff, 0x38, 0x00, 0x1f, 0xff,
+    0xff, 0xff, 0x01, 0xff, 0xef, 0xbf, 0xfc, 0x07, 0xff, 0x1f, 0xff, 0xff, 0x38, 0x00, 0x1f, 0xff,
+    0xff, 0xff, 0xed, 0xff, 0xef, 0xbf, 0xfd, 0xb7, 0xff, 0x1f, 0xff, 0xff, 0x39, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xed, 0xff, 0xed, 0xbf, 0xfd, 0xb7, 0xff, 0x00, 0x00, 0x07, 0x39, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xed, 0xff, 0xe1, 0xbf, 0xfd, 0xb7, 0xff, 0x00, 0x00, 0x07, 0x39, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0x01, 0xff, 0xff, 0xff, 0xfd, 0xb7, 0xff, 0x00, 0x00, 0x07, 0x39, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xe0, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x39, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0x01, 0xff, 0xfd, 0xff, 0xfc, 0x07, 0xff, 0xff, 0xff, 0xff, 0x39, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0x6d, 0xff, 0xfd, 0xff, 0xfd, 0xff, 0xff, 0xff, 0xff, 0xff, 0x39, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0x6d, 0xff, 0xfd, 0xff, 0xfc, 0x07, 0xff, 0x00, 0x00, 0x07, 0x39, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0x61, 0xff, 0xe0, 0x3f, 0xfd, 0xff, 0xff, 0x00, 0x00, 0x07, 0x3f, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0x0f, 0xff, 0xff, 0xff, 0xfc, 0x07, 0xff, 0x00, 0x00, 0x07, 0x3f, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x8f, 0xc7, 0x38, 0x00, 0x1f, 0xff,
+    0xff, 0xff, 0x01, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x8f, 0xc7, 0x38, 0x00, 0x1f, 0xff,
+    0xff, 0xff, 0x7d, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x8f, 0xc7, 0x3f, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0x7d, 0xff, 0xec, 0x3f, 0xff, 0xff, 0xff, 0xff, 0x8f, 0xc7, 0x3f, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0x7d, 0xff, 0xed, 0xbf, 0xfc, 0x07, 0xff, 0xff, 0x8f, 0xc7, 0x3f, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0x01, 0xff, 0xed, 0xbf, 0xfd, 0xf7, 0xff, 0xff, 0x8f, 0xc7, 0x3f, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xed, 0xbf, 0xfd, 0xf7, 0xff, 0xff, 0x8f, 0xc7, 0x3f, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0x01, 0xff, 0xe1, 0xbf, 0xfd, 0xb7, 0xff, 0xff, 0x8f, 0xc7, 0x3f, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, 0xfc, 0x37, 0xff, 0xff, 0x8f, 0xc7, 0x38, 0x00, 0x1f, 0xff,
+    0xff, 0xff, 0x7f, 0xff, 0xe0, 0x3f, 0xff, 0xff, 0xff, 0x00, 0x00, 0x07, 0x38, 0x00, 0x1f, 0xff,
+    0xff, 0xff, 0x7f, 0xff, 0xef, 0xbf, 0xfc, 0x07, 0xff, 0x00, 0x00, 0x07, 0x3f, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0x01, 0xff, 0xef, 0xbf, 0xff, 0xb7, 0xff, 0x00, 0x00, 0x07, 0x3f, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xef, 0xbf, 0xff, 0xb7, 0xff, 0xff, 0xff, 0xff, 0x38, 0x00, 0x1f, 0xff,
+    0xff, 0xff, 0xfd, 0xff, 0xef, 0xbf, 0xff, 0xb7, 0xff, 0xff, 0xff, 0xff, 0x38, 0x00, 0x1f, 0xff,
+    0xff, 0xff, 0xfd, 0xff, 0xff, 0xff, 0xfc, 0x07, 0xff, 0xff, 0xff, 0xff, 0x3f, 0xff, 0x9f, 0xff,
+    0xff, 0xff, 0x01, 0xff, 0xe0, 0x3f, 0xff, 0xff, 0xff, 0x00, 0x00, 0x07, 0x3f, 0xff, 0x9f, 0xff,
+    0xff, 0xff, 0xfd, 0xff, 0xef, 0xbf, 0xfc, 0x07, 0xff, 0x00, 0x00, 0x07, 0x3f, 0xff, 0x9f, 0xff,
+    0xff, 0xff, 0xfd, 0xff, 0xef, 0xbf, 0xff, 0xf7, 0xff, 0x00, 0x00, 0x07, 0x3f, 0xff, 0x9f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xef, 0xbf, 0xfc, 0x07, 0xff, 0xff, 0x8f, 0xc7, 0x3f, 0xff, 0x9f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xe0, 0x3f, 0xff, 0xf7, 0xff, 0xff, 0x8f, 0xc7, 0x3f, 0xff, 0x9f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x07, 0xff, 0xff, 0x8f, 0xc7, 0x38, 0x00, 0x1f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xe0, 0x3f, 0xff, 0xff, 0xff, 0xff, 0x8f, 0xc7, 0x38, 0x00, 0x1f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xfd, 0xbf, 0xfc, 0x07, 0xff, 0xff, 0x8f, 0xc7, 0x3f, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xfd, 0xbf, 0xfd, 0xb7, 0xff, 0xff, 0x8f, 0xc7, 0x3f, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xe1, 0xbf, 0xfd, 0xb7, 0xff, 0x00, 0x0f, 0xc7, 0x38, 0x00, 0x1f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xec, 0x3f, 0xfd, 0xb7, 0xff, 0x00, 0x0f, 0xc7, 0x38, 0x00, 0x1f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfd, 0xb7, 0xff, 0x00, 0x0f, 0xc7, 0x39, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xe0, 0x3f, 0xff, 0xff, 0xff, 0x1f, 0x80, 0x07, 0x39, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xed, 0xbf, 0xff, 0xff, 0xff, 0x1f, 0x80, 0x07, 0x39, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xed, 0xbf, 0xff, 0xff, 0xff, 0x1f, 0x80, 0x07, 0x39, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xed, 0xbf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x39, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xed, 0xbf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x39, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x39, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf9, 0xe7, 0x9f, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+
+#endif

User/APP_Reader/APP_Reader.c

@@ -1,7 +1,9 @@
+//阅读器应用
+
 #include "stdio.h"
 
 #include "sys.h"
-#include "delay.h"
+#include "systick.h"
 
 #include "key.h"
 #include "lcd.h"
@@ -56,6 +58,7 @@ uint8_t APP_Reader_Menu(void);
 uint8_t APP_Reader_SaveWrite(void);
 uint8_t APP_Reader_SaveRead(void);
 void APP_Reader_Msg(uint8_t *head, uint8_t *content);
+void APP_Reader_Msg_NoBlock(uint8_t *head, uint8_t *content);
 
 /*****************************************************************************************/
 
@@ -65,9 +68,11 @@ void APP_Reader_Msg(uint8_t *head, uint8_t *content);
 void APP_Reader_Launcher(void)
 {
     //GUI 选取文件
-    if (SD_SelectFile(filename, "txt") != SD_OK)
+    uint8_t ret;
+    if ((ret = SD_SelectFile(filename, "txt")) != SD_OK)
     {
-        APP_Reader_Msg("警告", "选取文件出错！\n\n请按任意键返回");
+        if (ret == SD_ERROR)
+            APP_Reader_Msg("警告", "选取文件出错！\n\n请按任意键返回");
 
         return;
     }
@@ -104,28 +109,26 @@ void APP_Reader_Launcher(void)
     f_open(&page_file, page_filepath, FA_OPEN_EXISTING | FA_READ); //打开分页文件
     while (1)
     {
-        LCD_Disp_Off;
         GE_Draw_ClrAll(WHITE);
 
         if (APP_Reader_ReadPage(current_font_size, current_page) != 0)
         {
             GE_Draw_ClrAll(WHITE);
-            LCD_Disp_On;
             APP_Reader_Msg("警告", "发生错误！\n\n请按任意键返回");
 
             return;
         }
-        LCD_Disp_On;
 
         switch (KEY_GetKeyWait())
         {
-        case KEY1: //设置菜单
+        case JOY_L_UP: //设置菜单
         {
             if (APP_Reader_Menu() != 0)
                 return;
         }
         break;
-        case KEY2: //向后翻页
+
+        case JOY_D_DOWN: //向后翻页
         {
             if (current_page == page_amount)
                 APP_Reader_Msg("提示", "已到最后一页！");
@@ -133,17 +136,14 @@ void APP_Reader_Launcher(void)
                 current_page++;
         }
         break;
-        case KEY3: //目前不存在此键
+
+        case JOY_U_DOWN: //向前翻页
         {
             if (current_page == 1)
                 APP_Reader_Msg("提示", "已到第一页！");
             else
                 current_page--;
         }
-        break;
-        case KEY4: //目前不存在此键
-        {
-        }
         }
     }
 }
@@ -176,16 +176,23 @@ uint8_t APP_Reader_ReadPage(uint8_t font_size, uint32_t page_num)
 
     *((uint8_t *)buffer + page.page_size) = '\0';
 
-    if (font_size == FONT_16)
+    GE_Font_Print(0, 0, BORDER_MAX, BORDER_MAX, font_size, BLACK, WHITE, TRUE, buffer);
-        ge_font_print_set.font_size = FONT_16;
-    else
-        ge_font_print_set.font_size = FONT_24;
 
-    GE_Font_Print_WithSet(0, 0, BORDER_MAX, BORDER_MAX, buffer);
+    GE_Font_Print(
+        1,
+        223,
+        BORDER_MAX,
+        BORDER_MAX,
+        FONT_16,
+        BLUE,
+        WHITE,
+        TRUE,
+        "页数:%d/%d  %.1f%%",
+        page_num,
+        page_amount,
+        (float)page_num / (float)page_amount * 100.0);
 
-    char temp_str[15];
+    GE_Draw_Disp();
-    sprintf(temp_str, "页数:%d/%d  %.1f%%", page_num, page_amount, (float)page_num / (float)page_amount * 100.0);
-    GE_Font_Print(1, 223, BORDER_MAX, BORDER_MAX, FONT_16, BLUE, WHITE, TRUE, temp_str);
 
     return 0;
 }
@@ -197,6 +204,8 @@ uint8_t APP_Reader_ReadPage(uint8_t font_size, uint32_t page_num)
   */
 uint8_t APP_Reader_SplitPages(uint8_t font_size)
 {
+    APP_Reader_Msg_NoBlock("提示", "正在分页中...\n\n请稍等");
+
     uint32_t br;
     FRESULT f_res;
     char ch;
@@ -314,12 +323,18 @@ uint8_t APP_Reader_SplitPages(uint8_t font_size)
   */
 uint8_t APP_Reader_Menu(void)
 {
-    uint8_t content[2][GE_GUI_MENUBOX_CONTENT_LEN] = {"字体设置", "退出"};
+    uint8_t content[3][GE_GUI_MENUBOX_CONTENT_LEN] = {"字体设置", "退出阅读器", "返回"};
 
     GE_Draw_Fill(50, 50, 220, 140, WHITE);
-    switch (GE_GUI_MenuBox(50, 50, 220, 140, "菜单", 2, content, NULL))
+    switch (GE_GUI_MenuBox(50, 50, 220, 140, "菜单", 3, content, NULL))
     {
-    case 1:
+    case 0: //返回
+    {
+        KEY_ClearKey();
+    }
+    break;
+
+    case 1: //字体设置
     {
         GE_Draw_Fill(50, 50, 220, 140, WHITE);
 
@@ -361,7 +376,7 @@ uint8_t APP_Reader_Menu(void)
     }
     break;
 
-    case 2:
+    case 2: //退出
     {
         //关闭文件
         f_close(&page_file);
@@ -372,6 +387,10 @@ uint8_t APP_Reader_Menu(void)
         return 1;
     }
     break;
+
+    case 3: //返回
+    {
+    }
     }
 
     return 0;
@@ -447,5 +466,16 @@ void APP_Reader_Msg(uint8_t *head, uint8_t *content)
 {
     GE_Draw_Fill(60, 75, 200, 90, WHITE);
     GE_GUI_MsgBox(60, 75, 200, 90, head, content, NULL);
-    KEY_GetKeyWait();
+    KEY_WaitKey(JOY_L);
+}
+
+/**
+  * @brief  消息框，任意键按下后退出
+  * @param  head: 标题
+  * @param  content: 内容
+  */
+void APP_Reader_Msg_NoBlock(uint8_t *head, uint8_t *content)
+{
+    GE_Draw_Fill(60, 75, 200, 90, WHITE);
+    GE_GUI_MsgBox(60, 75, 200, 90, head, content, NULL);
 }

User/APP_Reader/APP_Reader.h

@@ -1,3 +1,5 @@
+//阅读器应用
+
 #ifndef __APP_READER
 #define __APP_READER
 

User/APP_Setting/APP_Setting.c

@@ -0,0 +1,150 @@
+//系统设置应用
+
+#include "string.h"
+
+#include "sys.h"
+#include "systick.h"
+
+#include "key.h"
+#include "lcd.h"
+#include "hc25.h"
+
+#include "GameEngine.h"
+#include "WLAN.h"
+
+#include "APP_Setting.h"
+
+/**************************************** 私有定义 ****************************************/
+
+/*****************************************************************************************/
+
+/**************************************** 全局变量 ****************************************/
+
+/*****************************************************************************************/
+
+/**************************************** 私有函数 ****************************************/
+
+void APP_Setting_Msg(uint8_t *head, uint8_t *content);
+
+/*****************************************************************************************/
+
+/**
+  * @brief  启动设置
+  */
+void APP_Setting_Launcher(void)
+{
+    uint8_t content[4][GE_GUI_MENUBOX_CONTENT_LEN] = {"网络设置", "夜间模式", "关于", "退出设置"};
+
+    while (1)
+    {
+    label_menu_1:
+        GE_Draw_ClrAll(WHITE);
+        switch (GE_GUI_MenuBox(5, 5, 310, 230, "系统设置", 4, content, NULL))
+        {
+        case 0: //退出设置
+        {
+            return;
+        }
+        break;
+
+        case 1: //网络设置
+        {
+            uint8_t content[1][GE_GUI_MENUBOX_CONTENT_LEN] = {"网络信息"};
+
+            while (1)
+            {
+                GE_Draw_Fill(5, 5, 310, 230, WHITE);
+                switch (GE_GUI_MenuBox(5, 5, 310, 230, "网络设置", 1, content, NULL))
+                {
+                case 0:
+                {
+                    goto label_menu_1;
+                }
+                break;
+
+                case 1:
+                {
+                    GE_Draw_Fill(5, 5, 310, 230, WHITE);
+
+                    uint8_t temp_str[80];
+
+                    if (WLAN_CheckNet())
+                    {
+                        uint8_t temp_ipaddr_str[60];
+
+                        Delay_ms(2000);
+                        if (WLAN_GetIPAddr(temp_ipaddr_str))
+                        {
+                            char *ret = strrchr(temp_ipaddr_str, '&');
+                            *ret = '\n';
+                        }
+                        else
+                        {
+                            strcpy(temp_ipaddr_str, "查询失败");
+                        }
+
+                        sprintf(temp_str, "网络已连接\n\nIP地址及归属地：\n%s", temp_ipaddr_str);
+                    }
+                    else
+                    {
+                        strcpy(temp_str, "网络未连接");
+                    }
+
+                    GE_GUI_MsgBox(5, 5, 310, 230, "网络设置", temp_str, NULL);
+
+                    KEY_WaitKey(JOY_L);
+                }
+                }
+            }
+        }
+        break;
+
+        case 2: //夜间模式
+        {
+            uint8_t content[2][GE_GUI_MENUBOX_CONTENT_LEN] = {"开启", "关闭"};
+
+            GE_Draw_Fill(5, 5, 310, 230, WHITE);
+            switch (GE_GUI_MenuBox(5, 5, 310, 230, "夜间模式", 2, content, NULL))
+            {
+            case 1:
+            {
+                LCD_SendCmd(LCD_CMD_DINVON);
+            }
+            break;
+
+            case 2:
+            {
+                LCD_SendCmd(LCD_CMD_DINVOFF);
+            }
+            }
+        }
+        break;
+
+        case 3: //关于
+        {
+            GE_Draw_Fill(5, 5, 310, 230, WHITE);
+            GE_GUI_MsgBox(5, 5, 310, 230, "关于", "STM32Player v0.2\nPowered By StopPointTeam.\nAll Rights Reversed.\n\n版权所有，盗版必究", NULL);
+
+            KEY_WaitKey(JOY_L);
+        }
+        break;
+
+        case 4: //退出设置
+        {
+            return;
+        }
+        }
+    }
+}
+
+/**
+  * @brief  消息框，任意键按下后退出
+  * @param  head: 标题
+  * @param  content: 内容
+  */
+void APP_Setting_Msg(uint8_t *head, uint8_t *content)
+{
+    GE_Draw_Fill(60, 75, 200, 90, WHITE);
+    GE_GUI_MsgBox(60, 75, 200, 90, head, content, NULL);
+    KEY_WaitKey(JOY_L);
+}

User/APP_Setting/APP_Setting.h

@@ -0,0 +1,8 @@
+//系统设置应用
+
+#ifndef __APP_SETTING
+#define __APP_SETTING
+
+void APP_Setting_Launcher(void);
+
+#endif

User/APP_Video/APP_Video.c

@@ -0,0 +1,229 @@
+//视频播放器应用
+
+#include "sys.h"
+#include "systick.h"
+#include "tim.h"
+
+#include "key.h"
+#include "lcd.h"
+#include "led.h"
+
+#include "GameEngine.h"
+#include "SD.h"
+
+#include "APP_Video.h"
+
+/**************************************** 私有定义 ****************************************/
+
+typedef struct
+{
+    double fps;
+    uint32_t frame_count;
+} VideoInfo; //视频信息定义
+
+/*****************************************************************************************/
+
+/**************************************** 全局变量 ****************************************/
+
+FIL video_file;          //视频文件
+char video_filename[32]; //视频文件名
+char video_filepath[32]; //视频文件路径
+
+VideoInfo video_info;
+
+volatile uint32_t current_frame = 0;
+volatile uint8_t is_to_play = 0;
+volatile uint8_t is_disp_progress = 0;
+
+/*****************************************************************************************/
+
+/**************************************** 私有函数 ****************************************/
+
+void APP_Video_Play(void);
+uint8_t APP_Video_Menu(void);
+void APP_Video_Msg(uint8_t *head, uint8_t *content);
+
+/*****************************************************************************************/
+
+/**
+  * @brief  启动视频播放器
+  */
+void APP_Video_Launcher(void)
+{
+    //GUI 选取文件
+    uint8_t ret;
+    if ((ret = SD_SelectFile(video_filename, "32v")) != SD_OK)
+    {
+        if (ret == SD_ERROR)
+            APP_Video_Msg("警告", "选取文件出错！\n\n请按任意键返回");
+
+        return;
+    }
+
+    SD_GetPath(video_filepath, video_filename);
+
+    //打开文件
+    uint8_t res;
+    if (res = f_open(&video_file, video_filepath, FA_OPEN_EXISTING | FA_READ) != FR_OK)
+    {
+        char temp[10];
+        sprintf(temp, "%d", res);
+        APP_Video_Msg("警告", "打开文件出错！\n\n请按任意键返回");
+        APP_Video_Msg("警告", temp);
+
+        return;
+    }
+
+    //读取视频信息
+    uint32_t br;
+    if (f_read(&video_file, &video_info, sizeof(video_info), &br) != FR_OK)
+    {
+        APP_Video_Msg("警告", "读取视频信息错误！\n\n请按任意键返回");
+        return;
+    }
+
+    if (video_info.fps <= 0.0 || video_info.fps > 45.0)
+    {
+        APP_Video_Msg("警告", "不支持的视频格式！\n\n请按任意键返回");
+        return;
+    }
+
+    //设置定时器
+    TIM_Set(TIM2, video_info.fps, 0, 0);
+
+    f_lseek(&video_file, 153600);
+    APP_Video_Play();
+}
+
+/**
+  * @brief  播放视频
+  * @retval 成功返回 0，失败返回 1 
+  */
+void APP_Video_Play(void)
+{
+    uint32_t br;
+
+    while (1)
+    {
+        if (f_read(&video_file, GE_Draw_VRam, sizeof(GE_Draw_VRam), &br) != FR_OK)
+        {
+            APP_Video_Msg("警告", "视频播放出错！\n\n请按任意键返回");
+            return;
+        }
+
+        current_frame++;
+
+        if (is_disp_progress != 0)
+        {
+            GE_Draw_Fill(8, 228, 304, 8, WHITE);
+            GE_Draw_Rectangle(10, 230, 300, 4, GREEN);
+            GE_Draw_Rectangle(11, 231, (float)current_frame / (float)video_info.frame_count * 298.0, 2, BLUE);
+
+            is_disp_progress++; //溢出到 0 时进度条消失
+        }
+
+        switch (KEY_GetKey())
+        {
+        case JOY_R_UP: //进度条
+        {
+            is_disp_progress = !is_disp_progress;
+        }
+        break;
+
+        case JOY_L_UP: //菜单
+        {
+            //关闭定时器
+            TIM_Set(TIM2, 0, 0, 0);
+
+            if (APP_Video_Menu() == 1)
+                return;
+
+            //打开定时器
+            TIM_Set(TIM2, video_info.fps, 0, 0);
+        }
+        }
+
+        while (is_to_play != 1)
+            ;
+
+        GE_Draw_Disp();
+        is_to_play = 0;
+
+        if (br == 0)
+        {
+            f_lseek(&video_file, 153600);
+            current_frame = 0;
+        }
+    }
+}
+
+/**
+  * @brief  播放视频
+  * @retval 返回播放器返回 0，结束播放返回 1
+  */
+uint8_t APP_Video_Menu(void)
+{
+    uint8_t content[3][GE_GUI_MENUBOX_CONTENT_LEN] = {"视频信息", "退出播放器", "返回"};
+    while (1)
+    {
+        GE_Draw_Fill(50, 50, 220, 140, WHITE);
+        switch (GE_GUI_MenuBox(50, 50, 220, 140, "菜单", 3, content, NULL))
+        {
+        case 0: //返回
+        {
+            KEY_ClearKey();
+            return 0;
+        }
+        break;
+
+        case 1: //视频信息
+        {
+            char str_info[50];
+            sprintf(str_info, "视频帧率: %.2lf\n视频时长: %.2lfs", video_info.fps, (double)video_info.frame_count / video_info.fps);
+            GE_Draw_Fill(50, 50, 220, 140, WHITE);
+            GE_GUI_MsgBox(50, 50, 220, 140, "视频信息", str_info, NULL);
+
+            KEY_WaitKey(JOY_L);
+        }
+        break;
+
+        case 2: //退出播放器
+        {
+            f_close(&video_file);
+            return 1;
+        }
+        break;
+
+        case 3: //返回
+        {
+            return 0;
+        }
+        }
+    }
+}
+
+/**
+  * @brief  消息框，任意键按下后退出
+  * @param  head: 标题
+  * @param  content: 内容
+  */
+void APP_Video_Msg(uint8_t *head, uint8_t *content)
+{
+    GE_Draw_Fill(60, 75, 200, 90, WHITE);
+    GE_GUI_MsgBox(60, 75, 200, 90, head, content, NULL);
+    KEY_WaitKey(JOY_L);
+}
+
+/**
+  * @brief  TIM2 中断处理
+  */
+void TIM2_IRQHandler(void)
+{
+    if ((TIM2->SR & TIM_FLAG_UPDATE) != RESET)
+    {
+        //清除更新标志
+        TIM2->SR = ~TIM_FLAG_UPDATE;
+
+        is_to_play = 1;
+    }
+}

User/APP_Video/APP_Video.h

@@ -0,0 +1,8 @@
+//视频播放器应用
+
+#ifndef __APP_VIDEO
+#define __APP_VIDEO
+
+void APP_Video_Launcher(void);
+
+#endif

User/APP_Weather/APP_Weather.c

@@ -0,0 +1,119 @@
+#include "sys.h"
+#include "systick.h"
+
+#include "key.h"
+
+#include "GameEngine.h"
+#include "WLAN.h"
+
+#include "APP_Weather.h"
+
+/**************************************** 私有定义 ****************************************/
+
+typedef struct
+{
+    uint8_t city[20];
+    uint8_t weather[20];
+    uint8_t temp[20];
+    uint8_t wind_dir[20];
+    uint8_t wind_force[20];
+    uint8_t humidity[20];
+    uint8_t quality[20];
+} Weather;
+
+/*****************************************************************************************/
+
+/**************************************** 全局变量 ****************************************/
+
+Weather weather;
+uint8_t city_str[30];
+
+/*****************************************************************************************/
+
+/**************************************** 私有函数 ****************************************/
+
+void APP_Weather_SetCity(uint8_t *str);
+uint8_t APP_Weather_Sync(void);
+
+/*****************************************************************************************/
+
+/**
+  * @brief  启动天气应用
+  */
+void APP_Weather_Launcher(void)
+{
+    APP_Weather_SetCity("杭州");
+
+    GE_Draw_ClrAll(WHITE);
+
+    if (APP_Weather_Sync())
+    {
+        printf("连网获取天气成功\n天气: %s %s %s %s %s %s %s\n",
+               weather.city,
+               weather.weather,
+               weather.temp,
+               weather.wind_dir,
+               weather.wind_force,
+               weather.humidity,
+               weather.quality);
+
+        uint8_t temp_str[200];
+        sprintf(temp_str,
+                "城市：%s\n天气：%s\n温度：%s\n风向：%s\n风力：%s\n湿度：%s\n空气质量：%s\n",
+                weather.city,
+                weather.weather,
+                weather.temp,
+                weather.wind_dir,
+                weather.wind_force,
+                weather.humidity,
+                weather.quality);
+        GE_GUI_MsgBox(5, 5, 310, 230, "天气", temp_str, NULL);
+    }
+    else
+    {
+        printf("连网获取天气失败\n");
+
+        GE_GUI_MsgBox(5, 5, 310, 230, "天气", "连网获取天气失败", NULL); 
+    }
+
+    KEY_WaitKey(JOY_L);
+}
+
+/**
+  * @brief  选择城市
+  * @param  str: 城市名
+  */
+void APP_Weather_SetCity(uint8_t *str)
+{
+    strcpy(city_str, str);
+}
+
+/**
+  * @brief  同步天气
+  * @retval 成功返回 1，失败返回 0
+  */
+uint8_t APP_Weather_Sync(void)
+{
+    uint8_t weather_str[50];
+    if (WLAN_GetWeather(weather_str, city_str) != 1)
+        return 0;
+
+    uint8_t *p;
+
+    strtok(weather_str, "&");
+    strcpy(weather.city, weather_str);
+    p = strtok(NULL, "&");
+    strcpy(weather.weather, p);
+    p = strtok(NULL, "&");
+    strcpy(weather.temp, p);
+    p = strtok(NULL, "&");
+    strcpy(weather.wind_dir, p);
+    p = strtok(NULL, "&");
+    strcpy(weather.wind_force, p);
+    p = strtok(NULL, "&");
+    strcpy(weather.humidity, p);
+    p = strtok(NULL, "&");
+    strcpy(weather.quality, p);
+
+    return 1;
+}

User/APP_Weather/APP_Weather.h

@@ -0,0 +1,6 @@
+#ifndef __APP_WEATHER_H
+#define __APP_WEATHER_H
+
+void APP_Weather_Launcher(void);
+
+#endif

User/Clock/Clock.c

@@ -0,0 +1,86 @@
+#include "GameEngine.h"
+#include "WLAN.h"
+
+#include "Clock.h"
+
+ClockTime clock_time = {0, 0, 0, 0, 0, 0};
+uint8_t is_disp = 0;
+uint16_t disp_x;
+uint16_t disp_y;
+uint8_t disp_mode;
+
+void Clock_Init(void)
+{
+    printf(
+        "连网获取时间是否成功: %d\n时间: %d-%d-%d %d:%d:%d\n",
+        Clock_Sync(),
+        clock_time.year,
+        clock_time.month,
+        clock_time.day,
+        clock_time.hour,
+        clock_time.minute,
+        clock_time.second);
+}
+
+uint8_t Clock_Sync(void)
+{
+    uint8_t clock_time_str[20];
+    if (WLAN_GetNetClockTime(clock_time_str) != 1)
+        return 0;
+
+    uint8_t *p;
+
+    strtok(clock_time_str, "&");
+    sscanf(clock_time_str, "%d", &clock_time.year);
+    p = strtok(NULL, "&");
+    sscanf(p, "%d", &clock_time.month);
+    p = strtok(NULL, "&");
+    sscanf(p, "%d", &clock_time.day);
+    p = strtok(NULL, "&");
+    sscanf(p, "%d", &clock_time.hour);
+    p = strtok(NULL, "&");
+    sscanf(p, "%d", &clock_time.minute);
+    p = strtok(NULL, "&");
+    sscanf(p, "%d", &clock_time.second);
+
+    return 1;
+}
+
+void Clock_Handler(void)
+{
+    clock_time.second++;
+
+    if (clock_time.second == 60)
+    {
+        clock_time.second = 0;
+        clock_time.minute++;
+
+        if (clock_time.minute == 60)
+        {
+            clock_time.minute = 0;
+            clock_time.hour++;
+
+            if (clock_time.hour == 24)
+            {
+                clock_time.hour = 0;
+                clock_time.day++;
+            }
+        }
+    }
+
+    // static char temp_str[20];
+    // if (is_disp)
+    // {
+    //     sprintf(
+    //         temp_str,
+    //         "%04d %02d %02d %02d %02d %02d",
+    //         clock_time.year,
+    //         clock_time.month,
+    //         clock_time.day,
+    //         clock_time.hour,
+    //         clock_time.minute,
+    //         clock_time.second);
+    //     GE_Font_Print(disp_x, disp_y, BORDER_MAX, BORDER_MAX, FONT_16, BLUE, WHITE, FALSE, temp_str);
+    //     GE_Draw_Disp();
+    // }
+}

User/Clock/Clock.h

@@ -0,0 +1,21 @@
+#ifndef __CLOCK_H
+#define __CLOCK_H
+
+#include "sys.h"
+
+typedef struct
+{
+    uint16_t year;
+    uint8_t month;
+    uint8_t day;
+    uint8_t hour;
+    uint8_t minute;
+    uint8_t second;
+} ClockTime;
+
+void Clock_Init(void);
+uint8_t Clock_Sync(void);
+
+void Clock_Handler(void);
+
+#endif

User/FxLib/fxlib.c

@@ -0,0 +1,224 @@
+//fxlib 兼容层，用于从 fx-9860 平台向 STM32-Player 移植程序
+
+#include "sys.h"
+#include "systick.h"
+
+#include "led.h"
+#include "key.h"
+#include "lcd.h"
+
+#include "GameEngine.h"
+
+#include "fxlib.h"
+
+/**************************************** 私有函数 ****************************************/
+
+void FX_Draw_Point(int16_t x, int16_t y, uint16_t color);
+
+uint16_t FX_Draw_GetPoint(int16_t x, int16_t y);
+
+void FX_Draw_Mono(
+    int16_t x,
+    int16_t y,
+    uint8_t draw_mode,
+    uint8_t pos_mode,
+    uint16_t mono_color,
+    uint16_t back_color,
+    const unsigned char *pic,
+    uint16_t width,
+    uint16_t height);
+
+/*****************************************************************************************/
+
+/***************************************** FxLib *****************************************/
+
+void Sleep(int millisecond)
+{
+    Delay_ms(millisecond);
+}
+
+void ML_clear_vram()
+{
+    GE_Draw_ClrAll(WHITE);
+}
+
+void ML_clear_screen()
+{
+    GE_Draw_ClrAll(WHITE);
+    GE_Draw_Disp();
+}
+
+void ML_display_vram()
+{
+    GE_Draw_Disp();
+}
+
+void ML_bmp_or(const unsigned char *bmp, int x, int y, int width, int height)
+{
+    FX_Draw_Mono(x, y, MONO_OR, UP_LEFT, BLACK, WHITE, bmp, width, height);
+}
+
+void ML_bmp_and(const unsigned char *bmp, int x, int y, int width, int height)
+{
+    FX_Draw_Mono(x, y, MONO_AND, UP_LEFT, BLACK, WHITE, bmp, width, height);
+}
+
+void ML_bmp_xor(const unsigned char *bmp, int x, int y, int width, int height)
+{
+    FX_Draw_Mono(x, y, MONO_XOR, UP_LEFT, BLACK, WHITE, bmp, width, height);
+}
+
+void ML_bmp_or_cl(const unsigned char *bmp, int x, int y, int width, int height)
+{
+    FX_Draw_Mono(x, y, MONO_OR, UP_LEFT, BLACK, WHITE, bmp, width, height);
+}
+
+void ML_bmp_and_cl(const unsigned char *bmp, int x, int y, int width, int height)
+{
+    FX_Draw_Mono(x, y, MONO_AND, UP_LEFT, BLACK, WHITE, bmp, width, height);
+}
+
+void ML_bmp_xor_cl(const unsigned char *bmp, int x, int y, int width, int height)
+{
+    FX_Draw_Mono(x, y, MONO_XOR, UP_LEFT, BLACK, WHITE, bmp, width, height);
+}
+
+void ML_bmp_8_or(const unsigned char *bmp, int x, int y)
+{
+    FX_Draw_Mono(x, y, MONO_OR, UP_LEFT, BLACK, WHITE, bmp, 8, 8);
+}
+
+void ML_bmp_8_and(const unsigned char *bmp, int x, int y)
+{
+    FX_Draw_Mono(x, y, MONO_AND, UP_LEFT, BLACK, WHITE, bmp, 8, 8);
+}
+
+void ML_bmp_8_xor(const unsigned char *bmp, int x, int y)
+{
+    FX_Draw_Mono(x, y, MONO_XOR, UP_LEFT, BLACK, WHITE, bmp, 8, 8);
+}
+
+void ML_bmp_8_or_cl(const unsigned char *bmp, int x, int y)
+{
+    FX_Draw_Mono(x, y, MONO_OR, UP_LEFT, BLACK, WHITE, bmp, 8, 8);
+}
+
+void ML_bmp_8_and_cl(const unsigned char *bmp, int x, int y)
+{
+    FX_Draw_Mono(x, y, MONO_AND, UP_LEFT, BLACK, WHITE, bmp, 8, 8);
+}
+
+void ML_bmp_8_xor_cl(const unsigned char *bmp, int x, int y)
+{
+    FX_Draw_Mono(x, y, MONO_XOR, UP_LEFT, BLACK, WHITE, bmp, 8, 8);
+}
+
+void ML_bmp_16_or(const unsigned short *bmp, int x, int y)
+{
+    FX_Draw_Mono(x, y, MONO_OR, UP_LEFT, BLACK, WHITE, bmp, 16, 16);
+}
+
+void ML_bmp_16_and(const unsigned short *bmp, int x, int y)
+{
+    FX_Draw_Mono(x, y, MONO_AND, UP_LEFT, BLACK, WHITE, bmp, 16, 16);
+}
+
+void ML_bmp_16_xor(const unsigned short *bmp, int x, int y)
+{
+    FX_Draw_Mono(x, y, MONO_XOR, UP_LEFT, BLACK, WHITE, bmp, 16, 16);
+}
+
+void ML_bmp_16_or_cl(const unsigned short *bmp, int x, int y)
+{
+    FX_Draw_Mono(x, y, MONO_OR, UP_LEFT, BLACK, WHITE, bmp, 16, 16);
+}
+
+void ML_bmp_16_and_cl(const unsigned short *bmp, int x, int y)
+{
+    FX_Draw_Mono(x, y, MONO_AND, UP_LEFT, BLACK, WHITE, bmp, 16, 16);
+}
+
+void ML_bmp_16_xor_cl(const unsigned short *bmp, int x, int y)
+{
+    FX_Draw_Mono(x, y, MONO_XOR, UP_LEFT, BLACK, WHITE, bmp, 16, 16);
+}
+
+/*****************************************************************************************/
+
+/**************************************** 私有函数 ****************************************/
+
+void FX_Draw_Point(int16_t x, int16_t y, uint16_t color)
+{
+    if (x < 0 || x > ML_SCREEN_WIDTH - 1 || y < 0 || y > ML_SCREEN_HEIGHT - 1)
+        return;
+
+    x = 2 * x + 33;
+    y = 2 * y + 57;
+
+    GE_Draw_Point(x, y, color);
+    GE_Draw_Point(x + 1, y, color);
+    GE_Draw_Point(x, y + 1, color);
+    GE_Draw_Point(x + 1, y + 1, color);
+}
+
+uint16_t FX_Draw_GetPoint(int16_t x, int16_t y)
+{
+    if (x < 0 || x > ML_SCREEN_WIDTH - 1 || y < 0 || y > ML_SCREEN_HEIGHT - 1)
+        return WHITE;
+
+    return GE_Draw_GetPoint(2 * x + 33, 2 * y + 57);
+}
+
+void FX_Draw_Mono(
+    int16_t x,
+    int16_t y,
+    uint8_t draw_mode,
+    uint8_t pos_mode,
+    uint16_t mono_color,
+    uint16_t back_color,
+    const unsigned char *pic,
+    uint16_t width,
+    uint16_t height)
+{
+    if (pos_mode == MID)
+    {
+        x = x - width / 2;
+        y = y - height / 2;
+    }
+
+    uint8_t temp8;
+    int16_t x0 = x, y0 = y;
+
+    for (uint16_t i = 0; y - y0 < height; i++)
+    {
+        temp8 = pic[i];
+
+        for (uint16_t j = 0; j < 8; j++)
+        {
+            if (temp8 & 0x80)
+            {
+                if (FX_Draw_GetPoint(x, y) == back_color && (draw_mode == MONO_OR || draw_mode == MONO_XOR || draw_mode == MONO_COVER))
+                    FX_Draw_Point(x, y, mono_color);
+                else if (FX_Draw_GetPoint(x, y) == mono_color && draw_mode == MONO_XOR)
+                    FX_Draw_Point(x, y, back_color);
+            }
+            else
+            {
+                if (FX_Draw_GetPoint(x, y) == mono_color && (draw_mode == MONO_AND || draw_mode == MONO_COVER))
+                    FX_Draw_Point(x, y, back_color);
+            }
+
+            temp8 <<= 1;
+
+            x++;
+            if (x - x0 == width)
+            {
+                x = x0;
+                y++;
+                break;
+            }
+        }
+    }
+}
+
+/*****************************************************************************************/

User/FxLib/fxlib.h

@@ -0,0 +1,36 @@
+//fxlib 兼容层，用于从 fx-9860 平台向 STM32-Player 移植程序
+
+#ifndef __FXLIB_H
+#define __FXLIB_H
+
+#define ML_SCREEN_WIDTH 128
+#define ML_SCREEN_HEIGHT 64
+
+void Sleep(int millisecond);
+
+void ML_clear_vram();
+void ML_clear_screen();
+void ML_display_vram();
+
+void ML_bmp_or(const unsigned char *bmp, int x, int y, int width, int height);
+void ML_bmp_and(const unsigned char *bmp, int x, int y, int width, int height);
+void ML_bmp_xor(const unsigned char *bmp, int x, int y, int width, int height);
+void ML_bmp_or_cl(const unsigned char *bmp, int x, int y, int width, int height);
+void ML_bmp_and_cl(const unsigned char *bmp, int x, int y, int width, int height);
+void ML_bmp_xor_cl(const unsigned char *bmp, int x, int y, int width, int height);
+
+void ML_bmp_8_or(const unsigned char *bmp, int x, int y);
+void ML_bmp_8_and(const unsigned char *bmp, int x, int y);
+void ML_bmp_8_xor(const unsigned char *bmp, int x, int y);
+void ML_bmp_8_or_cl(const unsigned char *bmp, int x, int y);
+void ML_bmp_8_and_cl(const unsigned char *bmp, int x, int y);
+void ML_bmp_8_xor_cl(const unsigned char *bmp, int x, int y);
+
+void ML_bmp_16_or(const unsigned short *bmp, int x, int y);
+void ML_bmp_16_and(const unsigned short *bmp, int x, int y);
+void ML_bmp_16_xor(const unsigned short *bmp, int x, int y);
+void ML_bmp_16_or_cl(const unsigned short *bmp, int x, int y);
+void ML_bmp_16_and_cl(const unsigned short *bmp, int x, int y);
+void ML_bmp_16_xor_cl(const unsigned short *bmp, int x, int y);
+
+#endif

User/GameEngine/GE_Draw.c

@@ -1,8 +1,8 @@
 //游戏引擎图像绘制库
 
 #include "stdlib.h"
+#include "string.h"
 
-#include "sys.h"
 #include "spi.h"
 
 #include "lcd.h"
@@ -10,81 +10,40 @@
 
 #include "GE_Draw.h"
 
-/**************************************** 私有函数 ****************************************/
+/****************************************   显存   ****************************************/
 
-void GE_Draw_SetWinAbs(uint16_t x_start, uint16_t y_start, uint16_t x_end, uint16_t y_end);
+uint8_t GE_Draw_VRam[153600];
-void GE_Draw_SetWin(uint16_t x, uint16_t y, uint16_t width, uint16_t height);
 
 /*****************************************************************************************/
 
-_ge_draw_set_private ge_draw_set_private;
-
 _ge_draw_pic_set ge_draw_pic_set;
+_ge_draw_mono_set ge_draw_mono_set;
 
 /**
   * @brief  初始化 GE_Draw
   */
 void GE_Draw_Init(void)
 {
-    //私有变量
-    ge_draw_set_private.x_start = 0;
-    ge_draw_set_private.y_start = 0;
-    ge_draw_set_private.x_end = LCD_WIDTH - 1;
-    ge_draw_set_private.y_end = LCD_HEIGHT - 1;
-
     //绘制图片设置
     ge_draw_pic_set.is_reverse = FALSE;
     ge_draw_pic_set.pos_mode = UP_LEFT;
 
+    //绘制单色图设置
+    ge_draw_mono_set.draw_mode = MONO_OR;
+    ge_draw_mono_set.pos_mode = UP_LEFT;
+    ge_draw_mono_set.mono_color = BLACK;
+    ge_draw_mono_set.back_color = WHITE;
+
     GE_Draw_ClrAll(WHITE);
 }
 
 /**
-  * @brief  使用绝对坐标设置显示窗口。忽略重复设置，高效率
+  * @brief  刷新屏幕
-  * @param  x_start: 0~319
-  * @param  y_start: 0~239。窗口左上角坐标
-  * @param  x_end: 0~319
-  * @param  y_end: 0~239。窗口右下角坐标
   */
-void GE_Draw_SetWinAbs(uint16_t x_start, uint16_t y_start, uint16_t x_end, uint16_t y_end)
+void GE_Draw_Disp(void)
 {
-    if (x_end == ge_draw_set_private.x_end && y_end == ge_draw_set_private.y_end)
+    LCD_SetWin(0, 0, LCD_WIDTH, LCD_HEIGHT);
-    {
+    LCD_SendCmdDataBytes(LCD_CMD_RAMWR, GE_Draw_VRam, 153600);
-        if (x_start == ge_draw_set_private.x_start && y_start == ge_draw_set_private.y_start)
-        {
-            return;
-        }
-        else
-        {
-            ge_draw_set_private.x_start = x_start;
-            ge_draw_set_private.y_start = y_start;
-
-            LCD_SendCmdData16Bits(LCD_CMD_CASET, x_start);
-            LCD_SendCmdData16Bits(LCD_CMD_PASET, y_start);
-        }
-    }
-    else
-    {
-        ge_draw_set_private.x_start = x_start;
-        ge_draw_set_private.y_start = y_start;
-        ge_draw_set_private.x_end = x_end;
-        ge_draw_set_private.y_end = y_end;
-
-        LCD_SendCmdData32Bits(LCD_CMD_CASET, (x_start << 16) | x_end);
-        LCD_SendCmdData32Bits(LCD_CMD_PASET, (y_start << 16) | y_end);
-    }
-}
-
-/**
-  * @brief  使用窗口大小设置显示窗口。忽略重复设置，高效率
-  * @param  x: 0~319
-  * @param  y: 0~239。x y 为窗口左上角坐标
-  * @param  width: 窗口宽度。需大于 0
-  * @param  height: 窗口高度。需大于 0
-  */
-void GE_Draw_SetWin(uint16_t x, uint16_t y, uint16_t width, uint16_t height)
-{
-    GE_Draw_SetWinAbs(x, y, x + width - 1, y + height - 1);
 }
 
 /**
@@ -104,17 +63,21 @@ void GE_Draw_ClrAll(uint16_t color)
   * @param  height: 区域的高
   * @param  color: 颜色
   */
-void GE_Draw_Fill(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint16_t color)
+void GE_Draw_Fill(int16_t x, int16_t y, uint16_t width, uint16_t height, uint16_t color)
 {
-    GE_Draw_SetWin(x, y, width, height);
+    uint32_t point_num = width * height;
+    int16_t x0 = x, y0 = y;
 
-    uint32_t data16_count = width * height;
+    for (uint32_t i = 0; i < point_num; i++)
+    {
+        GE_Draw_Point(x++, y, color);
 
-    LCD_RAM_Wr;
+        if (x == x0 + width)
-    LCD_Data_Mode_On;
+        {
-
+            y++;
-    for (uint32_t i = 0; i < data16_count; i++)
+            x = x0;
-        SPI2_Write16Bits(color);
+        }
+    }
 }
 
 /**
@@ -123,13 +86,26 @@ void GE_Draw_Fill(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint1
   * @param  y: 0~239
   * @param  color: 颜色
   */
-void GE_Draw_Point(uint16_t x, uint16_t y, uint16_t color)
+void GE_Draw_Point(int16_t x, int16_t y, uint16_t color)
 {
     if (x < 0 || x > LCD_WIDTH - 1 || y < 0 || y > LCD_HEIGHT - 1)
         return;
 
-    GE_Draw_SetWinAbs(x, y, LCD_WIDTH - 1, LCD_HEIGHT - 1);
+    GE_Draw_VRam[(x + y * 320) * 2] = color >> 8;
-    LCD_SendCmdData16Bits(LCD_CMD_RAMWR, color);
+    GE_Draw_VRam[(x + y * 320) * 2 + 1] = color;
+}
+
+/**
+  * @brief  获取指定坐标的点的颜色。坐标不合法返回白色
+  * @param  x: 0~319
+  * @param  y: 0~239
+  */
+uint16_t GE_Draw_GetPoint(int16_t x, int16_t y)
+{
+    if (x < 0 || x > LCD_WIDTH - 1 || y < 0 || y > LCD_HEIGHT - 1)
+        return WHITE;
+
+    return ((uint16_t)GE_Draw_VRam[(x + y * 320) * 2] << 8) | GE_Draw_VRam[(x + y * 320) * 2 + 1];
 }
 
 /**
@@ -140,7 +116,7 @@ void GE_Draw_Point(uint16_t x, uint16_t y, uint16_t color)
   * @param  y3: 0~239
   * @param  color: 颜色
   */
-void GE_Draw_Line(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t color)
+void GE_Draw_Line(int16_t x0, int16_t y0, int16_t x1, int16_t y1, uint16_t color)
 {
     //使用 Bresenham 算法
     int16_t dx = abs(x1 - x0);
@@ -177,7 +153,7 @@ void GE_Draw_Line(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t c
   * @param  height: 矩形的高
   * @param  color: 颜色
   */
-void GE_Draw_Rectangle(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint16_t color)
+void GE_Draw_Rectangle(int16_t x, int16_t y, uint16_t width, uint16_t height, uint16_t color)
 {
     uint16_t i;
 
@@ -201,7 +177,7 @@ void GE_Draw_Rectangle(uint16_t x, uint16_t y, uint16_t width, uint16_t height,
   * @param  r: 圆的半径
   * @param  color: 颜色
   */
-void GE_Draw_Circle(uint16_t xm, uint16_t ym, uint16_t r, uint16_t color)
+void GE_Draw_Circle(int16_t xm, int16_t ym, uint16_t r, uint16_t color)
 {
     int16_t x = -r, y = 0, err = 2 - 2 * r, rm = r;
 
@@ -220,7 +196,33 @@ void GE_Draw_Circle(uint16_t xm, uint16_t ym, uint16_t r, uint16_t color)
 }
 
 /**
-  * @brief  绘制矩形图片。图片为 const unsigned char 数组，4096 色，不含图像头
+  * @brief  以指定颜色填充圆
+  * @param  xm: 0~319
+  * @param  ym: 0~239
+  * @param  r: 圆的半径
+  * @param  color: 颜色
+  */
+void GE_Draw_FillCircle(int16_t xm, int16_t ym, uint16_t r, uint16_t color)
+{
+    int16_t x = -r, y = 0, err = 2 - 2 * r, rm = r;
+
+    do
+    {
+        GE_Draw_Line(xm - x, ym + y, xm + x, ym + y, color);
+        GE_Draw_Line(xm - y, ym - x, xm + y, ym - x, color);
+        GE_Draw_Line(xm + x, ym - y, xm - x, ym - y, color);
+        GE_Draw_Line(xm + y, ym + x, xm - y, ym + x, color);
+        rm = err;
+        if (rm > x)
+            err += ++x * 2 + 1;
+        if (rm <= y)
+            err += ++y * 2 + 1;
+    } while (x < 0);
+}
+
+/**
+  * @brief  绘制矩形图片。图片为 const unsigned char 数组，4096 色，不含图像头。
+  *         请确保图片完全在屏幕区域内
   * @param  x: 0~319
   * @param  y: 0~239
   * @param  is_reverse: TRUE 为反色。反色模式下刷新较慢
@@ -230,36 +232,54 @@ void GE_Draw_Circle(uint16_t xm, uint16_t ym, uint16_t r, uint16_t color)
   * @param  height: 图片的高
   */
 void GE_Draw_Pic(
-    uint16_t x,
+    int16_t x,
-    uint16_t y,
+    int16_t y,
     uint8_t is_reverse,
     uint8_t pos_mode,
     const unsigned char *pic,
     uint16_t width,
     uint16_t height)
 {
-    if (pos_mode == UP_LEFT)
+    if (pos_mode == MID)
-        GE_Draw_SetWin(x, y, width, height);
+    {
-    else
+        x = x - width / 2;
-        GE_Draw_SetWin(x - width / 2, y - height / 2, width, height);
+        y = y - height / 2;
+    }
+
+    if (x == 0 && y == 0 && width == LCD_WIDTH && height == LCD_HEIGHT)
+        memcpy(GE_Draw_VRam, pic, 153600);
+
+    uint32_t point_num = width * height;
+    int16_t x0 = x, y0 = y;
+    uint16_t color;
 
     if (is_reverse == TRUE) //反色模式
     {
-        uint16_t data16_temp;
+        for (uint32_t i = 0; i < point_num; i++)
-        uint32_t data8_count = width * height * 2;
-
-        LCD_RAM_Wr;
-        LCD_Data_Mode_On;
-
-        for (uint32_t i = 0; i < data8_count; i += 2)
         {
-            data16_temp = 0xffff - (((uint16_t)pic[i] << 8) | pic[i + 1]); //反色
+            color = 0xffff - (((uint16_t)pic[2 * i] << 8) | pic[2 * i + 1]);
-            SPI2_Write16Bits(data16_temp);
+            GE_Draw_Point(x++, y, color);
+
+            if (x == x0 + width)
+            {
+                y++;
+                x = x0;
+            }
         }
     }
     else //非反色模式
     {
-        LCD_SendCmdDataBytes(LCD_CMD_RAMWR, (uint8_t *)pic, width * height * 2);
+        for (uint32_t i = 0; i < point_num; i++)
+        {
+            color = ((uint16_t)pic[2 * i] << 8) | pic[2 * i + 1];
+            GE_Draw_Point(x++, y, color);
+
+            if (x == x0 + width)
+            {
+                y++;
+                x = x0;
+            }
+        }
     }
 }
 
@@ -271,7 +291,7 @@ void GE_Draw_Pic(
   * @param  width: 图片的宽
   * @param  height: 图片的高
   */
-void GE_Draw_Pic_WithSet(uint16_t x, uint16_t y, const unsigned char *pic, uint16_t width, uint16_t height)
+void GE_Draw_Pic_WithSet(int16_t x, int16_t y, const unsigned char *pic, uint16_t width, uint16_t height)
 {
     GE_Draw_Pic(
         x,
@@ -282,3 +302,106 @@ void GE_Draw_Pic_WithSet(uint16_t x, uint16_t y, const unsigned char *pic, uint1
         width,
         height);
 }
+
+/**
+  * @brief  绘制单色位图。图片为 const unsigned char 数组，不含图像头
+  *         请确保图片完全在屏幕区域内
+  * @param  x: 0~319
+  * @param  y: 0~239
+  * @param  draw_mode: 绘制方式。MONO_OR MONO_AND MONO_XOR MONO_COVER
+  * @param  pos_mode: UP_LEFT 为从左上角开始显示，MID 为以坐标为中心显示
+  * @param  mono_color: 颜色
+  * @param  back_color: 背景色。只在 MONO_COVER 时有效
+  * @param  pic: 指向图片
+  * @param  width: 图片的宽
+  * @param  height: 图片的高
+  */
+void GE_Draw_Mono(
+    int16_t x,
+    int16_t y,
+    uint8_t draw_mode,
+    uint8_t pos_mode,
+    uint16_t mono_color,
+    uint16_t back_color,
+    const unsigned char *pic,
+    uint16_t width,
+    uint16_t height)
+{
+    if (pos_mode == MID)
+    {
+        x = x - width / 2;
+        y = y - height / 2;
+    }
+
+    uint8_t temp8;
+    int16_t x0 = x, y0 = y;
+
+    //循环横向输出
+    for (uint16_t i = 0; y - y0 < height; i++)
+    {
+        temp8 = pic[i];
+
+        for (uint16_t j = 0; j < 8; j++)
+        {
+            if (temp8 & 0x80)
+            {
+                if (
+                    (draw_mode == MONO_OR) ||
+                    (draw_mode == MONO_AND && GE_Draw_GetPoint(x, y) == mono_color) ||
+                    (draw_mode == MONO_XOR && GE_Draw_GetPoint(x, y) != mono_color) ||
+                    (draw_mode == MONO_COVER))
+                {
+                    GE_Draw_Point(x, y, mono_color);
+                }
+            }
+            else
+            {
+                if (
+                    (draw_mode == MONO_AND && GE_Draw_GetPoint(x, y) != mono_color) ||
+                    (draw_mode == MONO_XOR && GE_Draw_GetPoint(x, y) == mono_color) ||
+                    (draw_mode == MONO_COVER))
+                {
+                    GE_Draw_Point(x, y, back_color);
+                }
+            }
+
+            temp8 <<= 1;
+
+            x++;
+            if (x - x0 == width)
+            {
+                x = x0;
+                y++;
+                break;
+            }
+        }
+    }
+}
+
+/**
+  * @brief  绘制单色位图，使用设置。图片为 const unsigned char 数组，不含图像头
+  *         请确保图片完全在屏幕区域内
+  * @param  x: 0~319
+  * @param  y: 0~239
+  * @param  pic: 指向图片
+  * @param  width: 图片的宽
+  * @param  height: 图片的高
+  */
+void GE_Draw_Mono_WithSet(
+    int16_t x,
+    int16_t y,
+    const unsigned char *pic,
+    uint16_t width,
+    uint16_t height)
+{
+    GE_Draw_Mono(
+        x,
+        y,
+        ge_draw_mono_set.draw_mode,
+        ge_draw_mono_set.pos_mode,
+        ge_draw_mono_set.mono_color,
+        ge_draw_mono_set.back_color,
+        pic,
+        width,
+        height);
+}

User/GameEngine/GE_Draw.h

@@ -3,7 +3,9 @@
 #ifndef __GE_DRAW_H
 #define __GE_DRAW_H
 
-//ÑÕÉ«
+#include "sys.h"
+
+//颜色宏定义
 #define BLACK 0x0000
 #define NAVY 0x000f
 #define DARK_GREEN 0x03e0
@@ -21,14 +23,9 @@
 #define YELLOW 0xffe0
 #define WHITE 0xffff
 
-/**************************************** ˽ÓбäÁ¿ ****************************************/
+/****************************************   显存   ****************************************/
-typedef struct
+
-{
+extern uint8_t GE_Draw_VRam[153600];
-    uint16_t x_start;
-    uint16_t y_start;
-    uint16_t x_end;
-    uint16_t y_end;
-} _ge_draw_set_private;
 
 /*****************************************************************************************/
 
@@ -38,6 +35,12 @@ void GE_Draw_Init(void);
 
 /*****************************************************************************************/
 
+/**************************************** 刷新屏幕 ****************************************/
+
+void GE_Draw_Disp(void);
+
+/*****************************************************************************************/
+
 /**************************************** 清空屏幕 ****************************************/
 
 void GE_Draw_ClrAll(uint16_t color);
@@ -46,11 +49,15 @@ void GE_Draw_ClrAll(uint16_t color);
 
 /**************************************** 绘图函数 ****************************************/
 
-void GE_Draw_Fill(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint16_t color);
+void GE_Draw_Fill(int16_t x, int16_t y, uint16_t width, uint16_t height, uint16_t color);
-void GE_Draw_Point(uint16_t x, uint16_t y, uint16_t color);
+void GE_Draw_Point(int16_t x, int16_t y, uint16_t color);
-void GE_Draw_Line(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t color);
+uint16_t GE_Draw_GetPoint(int16_t x, int16_t y);
-void GE_Draw_Rectangle(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint16_t color);
+void GE_Draw_Line(int16_t x0, int16_t y0, int16_t x1, int16_t y1, uint16_t color);
-void GE_Draw_Circle(uint16_t xm, uint16_t ym, uint16_t r, uint16_t color);
+void GE_Draw_Rectangle(int16_t x, int16_t y, uint16_t width, uint16_t height, uint16_t color);
+void GE_Draw_Circle(int16_t xm, int16_t ym, uint16_t r, uint16_t color);
+void GE_Draw_FillCircle(int16_t xm, int16_t ym, uint16_t r, uint16_t color);
+
+/*****************************************************************************************/
 
 /**************************************** 绘制图片 ****************************************/
 //显示位置
@@ -66,14 +73,51 @@ typedef struct
 extern _ge_draw_pic_set ge_draw_pic_set;
 
 void GE_Draw_Pic(
-    uint16_t x,
+    int16_t x,
-    uint16_t y,
+    int16_t y,
     uint8_t is_reverse,
     uint8_t pos_mode,
     const unsigned char *pic,
     uint16_t width,
     uint16_t height);
-void GE_Draw_Pic_WithSet(uint16_t x, uint16_t y, const unsigned char *pic, uint16_t width, uint16_t height);
+void GE_Draw_Pic_WithSet(int16_t x, int16_t y, const unsigned char *pic, uint16_t width, uint16_t height);
+
+/*****************************************************************************************/
+
+/************************************** 绘制单色位图 **************************************/
+//是否绘制背景色
+#define MONO_OR 0
+#define MONO_AND 1
+#define MONO_XOR 2
+#define MONO_COVER 3
+
+void GE_Draw_Mono(
+    int16_t x,
+    int16_t y,
+    uint8_t draw_mode,
+    uint8_t pos_mode,
+    uint16_t mono_color,
+    uint16_t back_color,
+    const unsigned char *pic,
+    uint16_t width,
+    uint16_t height);
+
+typedef struct
+{
+    uint8_t draw_mode;   //绘制方式
+    uint8_t pos_mode;    //显示位置
+    uint16_t mono_color; //颜色
+    uint16_t back_color; //背景颜色
+} _ge_draw_mono_set;
+
+extern _ge_draw_mono_set ge_draw_mono_set;
+
+void GE_Draw_Mono_WithSet(
+    int16_t x,
+    int16_t y,
+    const unsigned char *pic,
+    uint16_t width,
+    uint16_t height);
 
 /*****************************************************************************************/
 

User/GameEngine/GE_Font.c

@@ -1,13 +1,19 @@
 //游戏引擎文字显示库
 
+#include "stdio.h"
+
 #include "sys.h"
 #include "lcd.h"
 #include "GameEngine.h"
 
 #include "GE_Font.h"
 
-#define GE_Font_GetACSIIDataSize(__FONT_SIZE__) ((__FONT_SIZE__ / 8 + ((__FONT_SIZE__ % 8) ? 1 : 0)) * (__FONT_SIZE__ / 2))
+/**************************************** 私有定义 ****************************************/
-#define GE_Font_GetGBKDataSize(__FONT_SIZE__) ((__FONT_SIZE__ / 8 + ((__FONT_SIZE__ % 8) ? 1 : 0)) * (__FONT_SIZE__))
+
+#define GE_Font_GetACSIIDataSize(__font_size__) ((__font_size__ / 8 + ((__font_size__ % 8) ? 1 : 0)) * (__font_size__ / 2))
+#define GE_Font_GetGBKDataSize(__font_size__) ((__font_size__ / 8 + ((__font_size__ % 8) ? 1 : 0)) * (__font_size__))
+
+/*****************************************************************************************/
 
 /**************************************** 私有函数 ****************************************/
 
@@ -213,27 +219,30 @@ uint8_t GE_Font_PrintGBK(uint16_t x, uint16_t y, uint8_t *ch, uint8_t font_size,
   * @param  y_start
   * @param  width: 显示窗的宽
   * @param  height: 显示窗口的高
-  * @param  font_size: 字体大小。注意：若含汉字，只能使用 FONT_12 24 32 48
+  * @param  font_size: 字体大小。注意：若含汉字，只能使用 FONT_12 16 24 32
   * @param  font_color: 字体颜色
   * @param  back_color: 背景颜色。透明时无效
   * @param  is_transparent: 是否透明
-  * @param  str: 字符串。需为 uint8_t *
+  * @param  format: 格式字符串
+  * @param  arg: 参数表
+  * @retval 打印完全返回 1，未打印完全返回0 
   */
-uint8_t GE_Font_Print(
+uint8_t GE_Font_Print_Va(
-    uint16_t x_start,
+    int16_t x_start,
-    uint16_t y_start,
+    int16_t y_start,
     uint16_t width,
     uint16_t height,
     uint8_t font_size,
     uint16_t font_color,
     uint16_t back_color,
     uint8_t is_transparent,
-    uint8_t *str)
+    uint8_t *format,
+    va_list arg)
 {
-    uint16_t x_end_plus_1;
+    int16_t x_end_plus_1;
-    uint16_t y_end_plus_1;
+    int16_t y_end_plus_1;
-    uint16_t x = x_start;
+    int16_t x = x_start;
-    uint16_t y = y_start;
+    int16_t y = y_start;
 
     if (width == BORDER_MAX)
         x_end_plus_1 = LCD_WIDTH;
@@ -247,6 +256,11 @@ uint8_t GE_Font_Print(
 
     uint8_t is_print_all = FALSE;
 
+    uint8_t temp_str[1040];
+    uint8_t *str = temp_str;
+
+    vsprintf(str, format, arg);
+
     while (1)
     {
         if (*(str) <= 0x80) //ASCII 字符
@@ -301,17 +315,70 @@ uint8_t GE_Font_Print(
     return is_print_all;
 }
 
+/**
+  * @brief  在指定区域内显示字符串。支持 ASCII、GBK 汉字
+  * @param  x_start
+  * @param  y_start
+  * @param  width: 显示窗的宽
+  * @param  height: 显示窗口的高
+  * @param  font_size: 字体大小。注意：若含汉字，只能使用 FONT_12 16 24 32
+  * @param  font_color: 字体颜色
+  * @param  back_color: 背景颜色。透明时无效
+  * @param  is_transparent: 是否透明
+  * @param  format: 格式字符串。用法与 printf 相同
+  * @param  ...
+  * @retval 打印完全返回 1，未打印完全返回0 
+  */
+uint8_t GE_Font_Print(
+    int16_t x_start,
+    int16_t y_start,
+    uint16_t width,
+    uint16_t height,
+    uint8_t font_size,
+    uint16_t font_color,
+    uint16_t back_color,
+    uint8_t is_transparent,
+    uint8_t *format,
+    ...)
+{
+    va_list aptr;
+    va_start(aptr, format);
+
+    uint8_t ret = GE_Font_Print_Va(
+        x_start,
+        y_start,
+        width,
+        height,
+        font_size,
+        font_color,
+        back_color,
+        is_transparent,
+        format,
+        aptr);
+
+    va_end(aptr);
+    return ret;
+}
+
 /**
   * @brief  在指定区域内显示字符串，使用设置。支持 ASCII、GBK 汉字
   * @param  x_start
   * @param  y_start
   * @param  width: 显示窗的宽
   * @param  height: 显示窗口的高
-  * @param  str: 字符串。需为 uint8_t *
+  * @param  format: 格式字符串
+  * @param  arg: 参数表
+  * @retval 打印完全返回 1，未打印完全返回0 
   */
-uint8_t GE_Font_Print_WithSet(uint16_t x_start, uint16_t y_start, uint16_t width, uint16_t height, uint8_t *str)
+uint8_t GE_Font_Print_WithSet_Va(
+    int16_t x_start,
+    int16_t y_start,
+    uint16_t width,
+    uint16_t height,
+    uint8_t *format,
+    va_list arg)
 {
-    return GE_Font_Print(
+    return GE_Font_Print_Va(
         x_start,
         y_start,
         width,
@@ -320,5 +387,39 @@ uint8_t GE_Font_Print_WithSet(uint16_t x_start, uint16_t y_start, uint16_t width
         ge_font_print_set.font_color,
         ge_font_print_set.back_color,
         ge_font_print_set.is_transparent,
-        str);
+        format,
+        arg);
+}
+
+/**
+  * @brief  在指定区域内显示字符串，使用设置。支持 ASCII、GBK 汉字
+  * @param  x_start
+  * @param  y_start
+  * @param  width: 显示窗的宽
+  * @param  height: 显示窗口的高
+  * @param  format: 格式字符串。用法与 printf 相同
+  * @param  ...
+  * @retval 打印完全返回 1，未打印完全返回0 
+  */
+uint8_t GE_Font_Print_WithSet(
+    int16_t x_start,
+    int16_t y_start,
+    uint16_t width,
+    uint16_t height,
+    uint8_t *format,
+    ...)
+{
+    va_list aptr;
+    va_start(aptr, format);
+
+    uint8_t ret = GE_Font_Print_WithSet_Va(
+        x_start,
+        y_start,
+        width,
+        height,
+        format,
+        aptr);
+
+    va_end(aptr);
+    return ret;
 }

User/GameEngine/GE_Font.h

@@ -3,6 +3,8 @@
 #ifndef __GE_FONT_H
 #define __GE_FONT_H
 
+#include "stdarg.h"
+
 void GE_FontInit(void);
 
 /**************************************** »æÖƺº×Ö ****************************************/
@@ -27,18 +29,45 @@ typedef struct
 
 extern _ge_font_print_set ge_font_print_set;
 
-uint8_t GE_Font_Print(
+uint8_t GE_Font_Print_Va(
-    uint16_t x_start,
+    int16_t x_start,
-    uint16_t y_start,
+    int16_t y_start,
     uint16_t width,
     uint16_t height,
     uint8_t font_size,
     uint16_t font_color,
     uint16_t back_color,
     uint8_t is_transparent,
-    uint8_t *str);
+    uint8_t *format,
+    va_list arg);
 
-uint8_t GE_Font_Print_WithSet(uint16_t x_start, uint16_t y_start, uint16_t width, uint16_t height, uint8_t *str);
+uint8_t GE_Font_Print(
+    int16_t x_start,
+    int16_t y_start,
+    uint16_t width,
+    uint16_t height,
+    uint8_t font_size,
+    uint16_t font_color,
+    uint16_t back_color,
+    uint8_t is_transparent,
+    uint8_t *format,
+    ...);
+
+uint8_t GE_Font_Print_WithSet_Va(
+    int16_t x_start,
+    int16_t y_start,
+    uint16_t width,
+    uint16_t height,
+    uint8_t *format,
+    va_list arg);
+
+uint8_t GE_Font_Print_WithSet(
+    int16_t x_start,
+    int16_t y_start,
+    uint16_t width,
+    uint16_t height,
+    uint8_t *format,
+    ...);
 
 /*****************************************************************************************/
 

User/GameEngine/GE_GUI.c

@@ -74,7 +74,7 @@ void GE_GUI_DoubleThickRectangle(uint16_t x, uint16_t y, uint16_t width, uint16_
 }
 
 /**
-  * @brief  消息窗口
+  * @brief  消息窗口。自动刷新屏幕
   * @param  x
   * @param  y
   * @param  width: 窗口的宽
@@ -97,13 +97,17 @@ void GE_GUI_MsgBox(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint
     //内容
     GE_Font_Print(x + 6, y + FONT_16 + 10, width - 12, BORDER_MAX, FONT_16, BLACK, WHITE, FALSE, content);
 
+    GE_Draw_Disp();
+
+    KEY_ClearKey();
+
     //调用回调函数
     if (handler_func != NULL)
         handler_func();
 }
 
 /**
-  * @brief  菜单窗口
+  * @brief  菜单窗口。自动刷新屏幕
   * @param  x
   * @param  y
   * @param  width: 窗口的宽
@@ -112,7 +116,7 @@ void GE_GUI_MsgBox(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint
   * @param  content_amount: 菜单项数
   * @param  content: 菜单内容数组
   * @param  handler_func: 回调函数。设置为 NULL 不执行回调
-  * @retval 被选中的选项序号，从 1 开始
+  * @retval 被选中的选项序号，从 1 开始。返回 0 表示用户触发 JOY_L_DOWN 事件，此时不调用回调函数
   */
 uint8_t GE_GUI_MenuBox(
     uint16_t x,
@@ -144,25 +148,37 @@ uint8_t GE_GUI_MenuBox(
             GE_GUI_TextBox(x + 4, y + FONT_16 + 8 + i * (FONT_16 + 3), width - 8, FONT_16 + 4, BLACK, WHITE, BLACK, 1, content[i]);
     }
 
+    GE_Draw_Disp();
+
+    KEY_ClearKey();
+
     while (1)
     {
         uint8_t key = KEY_GetKeyWait();
 
-        if (key == KEY2)
+        if (key == JOY_OK_UP)
         {
             break;
         }
-        else if (key == KEY3 && choice_num > 1)
+        else if (key == JOY_L_DOWN)
+        {
+            return 0;
+        }
+        else if (key == JOY_U_DOWN && choice_num > 1)
         {
             GE_GUI_TextBox(x + 4, y + FONT_16 + 8 + (choice_num - 1) * (FONT_16 + 3), width - 8, FONT_16 + 4, BLACK, WHITE, BLACK, 1, content[choice_num - 1]);
             choice_num--;
             GE_GUI_TextBox(x + 4, y + FONT_16 + 8 + (choice_num - 1) * (FONT_16 + 3), width - 8, FONT_16 + 4, WHITE, BLUE, BLACK, 1, content[choice_num - 1]);
+
+            GE_Draw_Disp();
         }
-        else if (key == KEY1 && choice_num < content_amount)
+        else if (key == JOY_D_DOWN && choice_num < content_amount)
         {
             GE_GUI_TextBox(x + 4, y + FONT_16 + 8 + (choice_num - 1) * (FONT_16 + 3), width - 8, FONT_16 + 4, BLACK, WHITE, BLACK, 1, content[choice_num - 1]);
             choice_num++;
             GE_GUI_TextBox(x + 4, y + FONT_16 + 8 + (choice_num - 1) * (FONT_16 + 3), width - 8, FONT_16 + 4, WHITE, BLUE, BLACK, 1, content[choice_num - 1]);
+
+            GE_Draw_Disp();
         }
     }
 

User/GameEngine/GE_GUI.h

@@ -9,21 +9,10 @@ typedef void (*MenuBoxHandler)(uint8_t choice_num);
 
 void GE_GUI_Init(void);
 
-void GE_GUI_TextBox(
-    uint16_t x,
-    uint16_t y,
-    uint16_t width,
-    uint16_t height,
-    uint16_t font_color,
-    uint16_t fill_color,
-    uint16_t rectangle_color,
-    uint16_t thickness,
-    uint8_t *str);
-
 void GE_GUI_MsgBox(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint8_t *head, uint8_t *content, MsgBoxHandler func);
 
 #define GE_GUI_MENUBOX_MAX_CONTENT_NUM 10 //适用参数 5, 5, 310, 230
-#define GE_GUI_MENUBOX_CONTENT_LEN 37 //适用参数 5, 5, 310, 230
+#define GE_GUI_MENUBOX_CONTENT_LEN 37     //适用参数 5, 5, 310, 230
 uint8_t GE_GUI_MenuBox(
     uint16_t x,
     uint16_t y,

User/GameEngine/GameEngine.c

@@ -1,7 +1,7 @@
 //ÓÎÏ·ÒýÇæ
 
 #include "sys.h"
-#include "delay.h"
+#include "systick.h"
 #include "led.h"
 #include "lcd.h"
 

User/Main/main.c

@@ -1,21 +1,39 @@
+#include "stdio.h"
+
 #include "sys.h"
-#include "delay.h"
+#include "systick.h"
+
 #include "led.h"
 #include "key.h"
 #include "lcd.h"
+#include "uart.h"
+#include "adc.h"
+#include "hc25.h"
+#include "hc12.h"
 
 #include "GameEngine.h"
 #include "SD.h"
+#include "WLAN.h"
 
 #include "APP_Reader.h"
+#include "APP_Video.h"
+#include "APP_Plane.h"
+#include "APP_Setting.h"
+#include "APP_Weather.h"
+#include "APP_Gobang.h"
 
 int main(void)
 {
-    MPU_Config();             //配置 MPU
+    MPU_Config();       //配置 MPU
-    Cache_Enable();           //打开 L1-Cache
+    Cache_Enable();     //打开 L1-Cache
-    HAL_Init();               //初始化 HAL 库
+    HAL_Init();         //初始化 HAL 库
-    Clock_Init(160, 5, 2, 4); //设置时钟为 400MHz
+    SystemClock_Init(); //设置时钟
-    SYSCLK_Init(400);         //延时初始化
+    Uart_Init();        //初始化串口
+    SysTick_Init();     //配置 SysTick 中断，并初始化软件定时器
+    ADC_Init();         //初始化 ADC
+
+    Uart_SetprintfCom(COM1);  //设置 printf 输出到 COM1
+    Uart_SetgetcharCom(COM1); //设置 getchar 从 COM1 输入
 
     //³õʼ»¯ÍâÉè
     LED_Init();
@@ -24,17 +42,62 @@ int main(void)
 
     //³õʼ»¯Ä£¿é
     GE_Init();
+    SD_Init();
 
-    if (SD_Init() == SD_OK)
+    HC25_Init();
-    {
+    HC12_Init();
-        APP_Reader_Launcher();
-        SD_DeInit();
 
-        GE_Draw_ClrAll(WHITE);
+    GE_Draw_ClrAll(WHITE);
-        GE_Draw_Pic_WithSet(0, 0, BORDER_MAX, BORDER_MAX, "阅读器运行结束，请重置！");
+    GE_Draw_Disp();
-    }
 
+    printf("完成系统初始化\n");
+
+    uint8_t content[6][GE_GUI_MENUBOX_CONTENT_LEN] = {"阅读器", "视频播放器", "飞机大战", "天气", "五子棋", "设置"};
     while (1)
     {
+        GE_Draw_ClrAll(WHITE);
+        switch (GE_GUI_MenuBox(5, 5, 310, 230, "STM32Player", 6, content, NULL))
+        {
+        case 1:
+        {
+            GE_Draw_ClrAll(WHITE);
+            APP_Reader_Launcher();
+        }
+        break;
+
+        case 2:
+        {
+            GE_Draw_ClrAll(WHITE);
+            APP_Video_Launcher();
+        }
+        break;
+
+        case 3:
+        {
+            GE_Draw_ClrAll(WHITE);
+            APP_Plane_Launcher();
+        }
+        break;
+
+        case 4:
+        {
+            GE_Draw_ClrAll(WHITE);
+            APP_Weather_Launcher();
+        }
+        break;
+
+        case 5:
+        {
+            GE_Draw_ClrAll(WHITE);
+            APP_Gobang_Launcher();
+        }
+        break;
+
+        case 6:
+        {
+            GE_Draw_ClrAll(WHITE);
+            APP_Setting_Launcher();
+        }
+        }
     }
 }

User/Picture/Picture.c

@@ -0,0 +1,598 @@
+//ͼƬ
+
+#include "Picture.h"
+
+const unsigned char test_pic[8850] = { /* 0X10,0X10,0X00,0X4B,0X00,0X3B,0X01,0X1B, */
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,};
+
+const unsigned char mono_testpic[590] = { /* 0X10,0X01,0X00,0X4B,0X00,0X3B, */
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XE0,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XE0,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XE0,0XE0,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X03,0XE0,0XE0,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X03,0XE0,0XE0,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X03,0XE0,0XE0,0X00,0X00,0X00,
+0X00,0X00,0X00,0X00,0X03,0XE0,0XE0,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X03,0XE0,
+0XE0,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X03,0XE0,0XE0,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X03,0XE0,0XE0,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X03,0XE0,0XE0,0X00,
+0X00,0X00,0X00,0X00,0X00,0X0E,0X03,0XE0,0XE0,0X00,0X00,0X00,0X00,0X00,0X00,0X3F,
+0X03,0XE0,0XE0,0X00,0X0E,0X00,0X00,0X00,0X00,0X7F,0X03,0XE0,0XE0,0X00,0X1F,0X80,
+0X00,0X00,0X01,0XFF,0X03,0XE0,0XE0,0X00,0X1F,0XC0,0X00,0X00,0X07,0XFE,0X03,0XE0,
+0XE0,0X00,0X1F,0XF0,0X00,0X00,0X0F,0XF8,0X03,0XE0,0XE0,0X00,0X0F,0XF8,0X00,0X00,
+0X3F,0XF0,0X03,0XE0,0XE0,0X00,0X03,0XFE,0X00,0X00,0XFF,0XC0,0X03,0XE0,0XE0,0X00,
+0X01,0XFF,0X00,0X01,0XFF,0X00,0X03,0XE0,0XE0,0X00,0X00,0X7F,0XC0,0X07,0XFE,0X00,
+0X03,0XE0,0XE0,0X00,0X00,0X3F,0XE0,0X1F,0XF8,0X00,0X03,0XE0,0XE0,0X00,0X00,0X0F,
+0XF8,0X3F,0XE0,0X00,0X03,0XE0,0XE0,0X00,0X00,0X07,0XFE,0XFF,0XC0,0X00,0X03,0XE0,
+0XE0,0X00,0X00,0X01,0XFF,0XFF,0X00,0X00,0X03,0XE0,0XE0,0X00,0X00,0X00,0XFF,0XFC,
+0X00,0X00,0X03,0XE0,0XE0,0X00,0X00,0X00,0X3F,0XF8,0X00,0X00,0X03,0XE0,0XE0,0X00,
+0X00,0X00,0X7F,0XF8,0X00,0X00,0X03,0XE0,0XE0,0X00,0X00,0X00,0XFF,0XFC,0X00,0X00,
+0X03,0XE0,0XE0,0X00,0X00,0X03,0XFF,0XFF,0X00,0X00,0X03,0XE0,0XE0,0X00,0X00,0X0F,
+0XFC,0XFF,0X80,0X00,0X03,0XE0,0XE0,0X00,0X00,0X3F,0XF0,0X3F,0XE0,0X00,0X03,0XE0,
+0XE0,0X00,0X00,0X7F,0XE0,0X1F,0XF8,0X00,0X03,0XE0,0XE0,0X00,0X01,0XFF,0X80,0X07,
+0XFC,0X00,0X03,0XE0,0XE0,0X00,0X07,0XFE,0X00,0X01,0XFF,0X00,0X03,0XE0,0XE0,0X00,
+0X0F,0XFC,0X00,0X00,0XFF,0X80,0X03,0XE0,0XE0,0X00,0X3F,0XF0,0X00,0X00,0X3F,0XE0,
+0X03,0XE0,0XE0,0X00,0XFF,0XC0,0X00,0X00,0X1F,0XF0,0X03,0XE0,0XE0,0X01,0XFF,0X80,
+0X00,0X00,0X07,0XFC,0X03,0XE0,0XE0,0X07,0XFE,0X00,0X00,0X00,0X03,0XFE,0X03,0XE0,
+0XE0,0X1F,0XF8,0X00,0X00,0X00,0X00,0XFE,0X03,0XE0,0XE0,0X3F,0XF0,0X00,0X00,0X00,
+0X00,0X7E,0X03,0XE0,0XE0,0XFF,0XC0,0X00,0X00,0X00,0X00,0X1C,0X03,0XE0,0XE1,0XFF,
+0X00,0X00,0X00,0X00,0X00,0X00,0X03,0XE0,0XE1,0XFC,0X00,0X00,0X00,0X00,0X00,0X00,
+0X03,0XE0,0XE1,0XF8,0X00,0X00,0X00,0X00,0X00,0X00,0X03,0XE0,0XE0,0XE0,0X00,0X00,
+0X00,0X00,0X00,0X00,0X03,0XE0,0XE0,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X03,0XE0,
+0XE0,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X03,0XE0,0XE0,0X00,0X00,0X00,0X00,0X00,
+0X00,0X00,0X03,0XE0,0XE0,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X03,0XE0,0XE0,0X00,
+0X00,0X00,0X00,0X00,0X00,0X00,0X03,0XE0,0XE0,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
+0X03,0XE0,0XE0,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X03,0XE0,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XE0,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XE0,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XE0,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XE0,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XE0,};

User/Picture/Picture.h

@@ -1 +1,9 @@
-extern const unsigned char pic_minecraft[153600];
+//ͼƬ
+
+#ifndef __PICTURE_H
+#define __PICTURE_H
+
+extern const unsigned char test_pic[8850];
+extern const unsigned char mono_testpic[590];
+
+#endif

User/SD/SD.c

@@ -91,7 +91,7 @@ uint8_t SD_GetPath(uint8_t *filepath, uint8_t *filename)
   * @brief  SD 卡 GUI 文件选择器
   * @param  filepath: 返回储存文件路径
   * @param  filesuffix: 文件后缀名。NULL 时不限后缀
-  * @retval 成功返回 0，失败返回 1
+  * @retval 成功返回 0，失败返回 1，用户按下 JOY_L 返回 2
   */
 uint8_t SD_SelectFile(uint8_t *filename, uint8_t *filesuffix)
 {
@@ -133,6 +133,9 @@ uint8_t SD_SelectFile(uint8_t *filename, uint8_t *filesuffix)
     }
 
     uint8_t choice = GE_GUI_MenuBox(5, 5, 310, 230, "请选择文件：", num, content, NULL);
+
+    if (choice == 0)
+        return 2;
     
     strcpy(filename, content[choice - 1]);
     return SD_OK;

User/WLAN/WLAN.c

@@ -0,0 +1,71 @@
+//WLAN ¿â
+
+#include "stdio.h"
+#include "string.h"
+
+#include "systick.h"
+
+#include "led.h"
+#include "hc25.h"
+
+#include "Clock.h"
+
+#include "WLAN.h"
+
+uint8_t WLAN_CheckNet(void)
+{
+    uint8_t str[6];
+
+    HC25_ClearReceive;
+    HC25_SendBuff("checknet", 9);
+
+    str[0] = '\0';
+    if (HC25_ReceiveBuffUntil(str, '\n', 1000) && strcmp(str, "OK") == 0)
+        return 1;
+    else
+        return 0;
+}
+
+uint8_t WLAN_GetIPAddr(uint8_t *ipaddr_str)
+{
+    HC25_ClearReceive;
+    HC25_SendBuff("ipaddr", 7);
+
+    ipaddr_str[0] = '\0';
+    if (HC25_ReceiveBuffUntil(ipaddr_str, '\n', 1000) && strcmp(ipaddr_str, "OK") == 0)
+        if (HC25_ReceiveBuffUntil(ipaddr_str, '\n', 1000))
+            return 1;
+
+    return 0;
+}
+
+uint8_t WLAN_GetNetClockTime(uint8_t *clock_time_str)
+{
+    HC25_ClearReceive;
+    HC25_SendBuff("time", 5);
+
+    clock_time_str[0] = '\0';
+
+    if (HC25_ReceiveBuffUntil(clock_time_str, '\n', 1000) && strcmp(clock_time_str, "OK") == 0)
+        if (HC25_ReceiveBuffUntil(clock_time_str, '\n', 1000))
+            return 1;
+
+    return 0;
+}
+
+uint8_t WLAN_GetWeather(uint8_t *weather_str, uint8_t *city_str)
+{
+    uint8_t temp_str[15] = "weather=";
+
+    HC25_ClearReceive;
+    strcat(temp_str, city_str);
+    HC25_SendBuff(temp_str, strlen(temp_str) + 1);
+
+    weather_str[0] = '\0';
+
+    if (HC25_ReceiveBuffUntil(weather_str, '\n', 1000) && strcmp(weather_str, "OK") == 0)
+        if (HC25_ReceiveBuffUntil(weather_str, '\n', 1000))
+            return 1;
+
+    return 0;
+}

User/WLAN/WLAN.h

@@ -0,0 +1,15 @@
+//WLAN ¿â
+
+#ifndef __WLAN_H
+#define __WLAN_H
+
+#include "sys.h"
+
+#include "Clock.h"
+
+uint8_t WLAN_CheckNet(void);
+uint8_t WLAN_GetIPAddr(uint8_t *ipaddr_str);
+uint8_t WLAN_GetNetClockTime(uint8_t *clock_time_str);
+uint8_t WLAN_GetWeather(uint8_t *weather_str, uint8_t *city_str);
+
+#endif